• Smart Structures and Systems
• /
• v.1 no.1
• /
• pp.63-82
• /
• 2005

This paper introduces a technology for robust and low maintenance cost sensor network capable to detect accelerations below a micro-g in a wide frequency bandwidth (above 1,000 Hz). Sensor networks with such performance are critical for navigation, seismology, acoustic sensing, and for the health monitoring of civil structures. The approach is based on the fabrication of an array of high sensitivity accelerometers, each utilizing Fabry-Perot cavity with wavelength-dependent reflectivity to allow embedded optical detection and serialization. The unique feature of the approach is that no local power source is required for each individual sensor. Instead one global light source is used, providing an input optical signal which propagates through an optical fiber network from sensor-to-sensor. The information from each sensor is embedded onto the transmitted light as an intrinsic wavelength division multiplexed signal. This optical "rainbow" of data is then assessed providing real-time sensing information from each sensor node in the network. This paper introduces the Fabry-Perot based accelerometer and examines its critical features, including the effects of imperfections and resolution estimates. It then presents serialization techniques for the creation of systems of arrayed sensors and examines the effects of serialization on sensor response. Finally, a fabrication process is proposed to create test structures for the critical components of the device, which are dynamically characterized.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.8A
• /
• pp.664-670
• /
• 2005

OFDM is a very attractive technique for achieving high-bit-rate data transmission and high spectrum efficiency in fading environment. However, the reliable detection of an OFDM signal in time-varying multipath fading channels is a challenging problem. Accordingly, various channel estimation methods have been proposed for performance improvement. But, conventional pilot patterns for channel estimation in OFDM systems have not robust characteristics relating to various mobile speed. To solve this drawback in conventional patterns, we propose the pilot patterns modified from conventional patterns to have a good error performance in time-varying fading channel. Simulation results show that the performance of the proposed pilot patterns is better than conventional patterns in fast time-varying channel.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.333-336
• /
• 2008

We have studied on optical properties of advanced S-IPS with a fine pitch electrode and a new finger design. Transmittance of panel increases with decreasing of width and angle of finger electrode. In order to improve transmittance, fine pitch electrode of ${\sim}2{\mu}m$ and rubbing angle of 10 degree have been adopted. Various optical performances are defined as the function of finger design and field intensify across the IPS pixel electrodes. We have developed the advanced electrode structures with a high performance. As a result, the optical properties of 42" full HD with 120Hz frequency shows high transmittance over 5%, contrast ratio of 1800:1, gray-to-gray response time of 4.4ms, respectively. And also we have studied that the moving picture quality of IPS LCD is related with design parameters of IPS cells and finger shape.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12A
• /
• pp.1217-1224
• /
• 2008

The carrier tracking has to be basically completed for accurate positioning of Galileo satellite system. The FLL for tracking frequency errors is robust to dynamic stress causing changes of propagation time but hardly tracks accurate carrier tracking. The PLL for tracking phase errors provides accurate carrier tracking but is sensitive to dynamic stress and its tracking performance is decreased when high dynamics exist. In this paper, we design the carrier tracking loop with the FLL-assisted PLL loop filter and co-operations of FLL and PLL to achieve accurate carrier tracking in high dynamic stress. we prove the performance of designed carrier tracking loop via simulations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.6
• /
• pp.546-554
• /
• 2015

Ultra-wideband(UWB) radar is widely used in many penetration radar applications, such as ground-penetrating radar and foliage-penetrating radar, because it has many advantages in detecting concealed objects. One type of UWB radar system is random noise radar, which many be robust to jamming environment. However conventional random noise radar requires high-speed analog-to-digital convertor(ADC) for matched filtering. In this thesis, a pseudo-random noise radar system that maintains anti-jamming characteristics but does not require high-speed ADC is researched. and The UWB system is implemented in a low frequency system, and its performance has been demonstrated by experiment, which proves the concept of the proposed pseudo-random noise radar system.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.9 no.3
• /
• pp.156-165
• /
• 2004

Concentrations of substrates, glucose, and ammionia in biological processes have been on-line monitored by using glucose-flow injection (FIA) and ammonia-FIA systems. Based on the on-line monitored data the concentrations of substrates have been controlled by an on-off controller, a PID controller, and a neural network (NN) based controller. A simulation program has been developed to test the control quality of each controller and to estimate the control parameters. The on-off controller often produced high oscillations at the set point due to its low robustness. The control quality of a PID controller could have been improved by a high analysis frequency and by a short residence time of sample in a FIA system. A NN-based controller with 3 layers has been developed, and a 3(input)-2(hidden)-1(output) network structure has been found to be optimal for the NN-based controller. The performance of the three controllers has been tested in a simulated process as well as in a cultivation process of Saccharomyces cerevisiae, and the performance has also been compared to simulation results. The NN-based controller with the 3-2-1 network structure was robust and stable against some disturbances, such as a sudden injection of distilled water into a biological process.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.13 no.4
• /
• pp.14-20
• /
• 1999

This paper presents a design techniques for an electronic ballast of HID lamps. An electronic ballast for HID lamps usually employs a high-frequeocy resonant inverter and voltage-to-frequency converter to control the outpIt and a half-bridge and series resonant circuit are chosen for the ballast First, to design PI controller, the inverter with V/F converter is modeled with a transfer function and the controller PI gains are determined. This paper shows that an integral controller is only needed to control the current. Second, a se1f-feedback controller is proposed. This structure, simple and robust, is analyzed and a feedback gain is determined by using the inverter model. Experirrental system is built with a commercial 250W high pressure sodium lamp and the results show a validity of the proposed ballast and the total efficiency is increased by 5%.

• Journal of Navigation and Port Research
• /
• v.34 no.3
• /
• pp.181-187
• /
• 2010

The performance of underwater wireless communication system is influenced on channel characteristic. Especially, a delay spread cause by reverberation and multi-path happen the ISI (Inter Symbol Interference) and reduces the communication performance. In this paper, we study the application of high speed data transmission in underwater to use the OFDM (Orthogonal Frequency Division Multiplexing) technique for robust the reverberation and multi-path. we confirm the performance of communication in underwater to use the model for actually underwater channel simulation model. As a result, we acquired the BER of modulation techniques. The BER of single carrier is $2{\times}10^{-1}$ and BER of multi carrier is $8{\times}10^{-2}$ in 1000m.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.10
• /
• pp.1780-1786
• /
• 2008

The performance of underwater wireless communication system is influenced on channel characteristic. Especially, a delay spread cause by reverberation and multi-path happen the ISI (Inter Symbol Interference) and reduces the communication performance. In this paper, we study the application of high speed data transmission in underwater to use the OFDM (Orthogonal Frequency Division Multiplexing) technique for robust the reverberation and multi-path. we confirm the performance of communication in underwater to use the model for actually underwater channel simulation model. As a result, we acquired the BER of modulation techniques. The BER of single carrier is $2{\times}10^{-1}$ and BER of multi currier is $8{\times}10^{-2}$ in 1000m. Transmission of single carrier is 5 kbps.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.9
• /
• pp.1723-1729
• /
• 2016

Digital watermarking is tried to get an optimum tradeoffs between its performance characteristics, robustness, transparency and capacity. This paper is, therefore, suggesting a watermarking technique that builds multiple barcodes in various frequency bands to implement embedded watermarks that is imperceptible and robust against various attacks. Even though a watermark technique with duplicated barcode watermarks embedded in various frequency bands can satisfy robustness as there is high possibility that watermarks embedded in an image remains after various attacks, the duplicated barcode data can weaken imperceptibility. Thus, to satisfy the conflicting characteristic requirements of watermarks, robustness and imperceptibility, different barcode data is embedded in each frequency band. The test shows that ownership authentication with the technique suggested in this thesis does not require specialized hardware, and extracted watermarks can be easily identified through a mobile barcode scanner app, which allows low complexity, low cost and swift identification.