• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.233-236
• /
• 2004

In this paper, a new sensorless vibration control scheme is proposed for a flexible manipulator system. A robust sliding mode controller incorporating with a ‘reaction moment observer’ used for the estimation of the reaction moment reciprocally acting on flexible arm and hub inertia is introduced to achieve desired control target. The rigid body dynamics of the single-link flexible manipulator is simply considered in the design of the sliding mode controller. Then, the reaction moment is estimated by the proposed reaction moment observer to suppress the residual vibration of the flexible arm. The performance of the proposed control scheme is verified by computer simulation and experiment.

• 전기학회논문지
• /
• 제59권10호
• /
• pp.1797-1802
• /
• 2010

This paper proposes a new fuzzy speed controller based on the Takagi-Sugeno fuzzy method to achieve a robust speed control of a permanent magnet synchronous motor(PMSM). The proposed controller requires the information of the load torque, so the second-order load torque observer is used to estimate it. The LMI condition is derived for the existence of the proposed fuzzy speed controller, and the LMI parameterization to calculate the gain matrices of the controller is provided. It is proven that the augmented control system including the fuzzy speed controller and the load torque observer is exponentially stable. To evaluate the performance of the proposed fuzzy speed controller, the simulation and experimental results are presented under motor parameter and load torque variations. Finally, it is clearly verified that the proposed control method can be used to accurately control the speed of a permanent magnet synchronous motor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1509-1510
• /
• 2008

In this paper, we propose a robust adaptive controller for induction motors with uncertainties using nonlinear disturbance observer(NDO). The proposed NDO is applied to estimate the time varying lumped uncertainty which are derived from unknown motor parameters and load torque, but NDO error does not converge to zero since the derivate of lumped uncertainty is not zero. Then the high order neural networks(HONN) is presented to estimate the NDO error such that the rotor speed to converge to a small neighborhood of the desired trajectory. Rotor flux and inverse time constant are estimated by the sliding mode adaptive flux observer. Simulation results are provided to verify the effectiveness of the proposed approach.

• 전기학회논문지
• /
• 제57권7호
• /
• pp.1247-1253
• /
• 2008

A design method of a T-S fuzzy model based reduced order nonlinear unknown input observer(NUIO) is presented. The fuzzy NUIO is designed based on the parallel distributed compensation(PDC) concept. It consists of a number of the linear UIOs, each of which is designed for each local linear model in the T-S fuzzy model of a class of nonlinear systems. The fuzzy NUIO provides not only the state estimates insensitive to the unknown inputs, for example, disturbances and faults etc., but also the estimates of the unknown inputs. Therefore, It can be employed in the state feedback control and disturbance rejection control of a class of nonlinear systems with unknown disturbances. It also applied to the robust residual generation for the fault detection and isolation systems and to the design of fault tolerant control systems. As an example, the NUIO is applied to an inverted pendulum system to show the state and disturbance estimation performance and to illustrate the fuzzy reduced order NUIO design method.

• 설비공학논문집
• /
• 제26권5호
• /
• pp.240-246
• /
• 2014

A fault detector was developed for heat exchangers of a hybrid heat pump (HP) for household. The proposed detector can be applied directly to raw operating data. It is to monitor a tracking error between a measured saturation temperature and its state observer. The observer was estimated from a state-space model simulating dynamics of a heat exchanger. The real hybrid HP was substituted with a dynamic simulator that implemented two-phased heat transfer and was validated by experimental data. And artificial fault data were generated using the simulator. Diagnosing the data showed the following. The residual calculated from the state observer error shows a relatively robust consistency with respect fouling level. The fault detector is practically useful because it detects a threshold fouling beyond which the performance starts to deteriorate significantly.

• 동력기계공학회지
• /
• 제12권1호
• /
• pp.80-86
• /
• 2008

A motor cylinder apparatus is used to transfer a load in industrial applications. The apparatus is composed of a motor and power transmission elements such as worm gear and screw. In this case, the nonlinear friction of the transmission elements has a bad influence on the position control performance. To overcome this problem, the position control system consists of a feedback controller to achieve nominal control performance and a disturbance observer to compensate nonlinear friction. Especially the filter of a disturbance observer is designed from viewpoint of robust stability. Finally, the simulation result shows that the proposed control system is effective for the disturbance elimination as well as the friction compensation.

• 제어로봇시스템학회논문지
• /
• 제6권7호
• /
• pp.578-585
• /
• 2000

This paper presents a robust and systematic bilateral controller design method for a teleoperation of an underwater manipulator. Disturbance observer is used as a local controller of the master and underwater slave manipulator to set up the teleoperation system as a nominal model by compensating coupled nonlinear terms model uncertainties and external disturbances in the water. Using the linearized master/slave model a $H_{\infty}$ optimal control scheme is applied to systematically construct a force reflecting bilateral controller.

• 전기학회논문지
• /
• 제64권5호
• /
• pp.751-754
• /
• 2015

This paper deals with a robust speed control problem of a vertical one-link manipulator in the presence of parameter uncertainties and unknown input disturbance. Uncertain load weight causes an additional sinusoidal disturbance in the rotation of the link. In order to improve the robustness against parameter uncertainties and external input disturbances, this paper employs an internal model-based disturbance observer approach. Comparative computer simulations are performed to test the performance of the proposed controller. The simulation results show the enhanced performance of the proposed method.

• 한국군사과학기술학회지
• /
• 제19권3호
• /
• pp.387-394
• /
• 2016

This paper proposes a new disturbance observer(DOB). The purpose of the DOB is to realize the plant performing like a model in the presence of disturbances which come from external environment and inherent nonlinearities and uncertainties in the plant. It is shown that the proposed DOB compensates those disturbances, nonlinearities and uncertainties, effectively. And it is theoretically proved that the proposed DOB can be guaranteed its stability for the stable plant. Its availability is shown by applying the DOB to the stabilization platform for EOTS(Electro Optical Tracking System).

• 한국산학기술학회논문지
• /
• 제7권2호
• /
• pp.131-136
• /
• 2006

최근 전통적인 PI제어를 적용한 유도전동기의 제어운전시스템이 산업현장에 많이 보급되어 있다. 그러나, 이러한 방법은 파라미터 변동이나 부하외란에 대해 매우 민감하며, 속도 제어기의 이득이 고정되어 전동기 운전 중에 파라미터가 변하거나 스텝상태로 변화하는 부하가 걸리게 되면 안정성과 추종성능이 악화되는 경향이 있다. 본 논문에서는 전동기의 기계적인 파라미터 변화와 함께 외란의 변화에 대하여 강인한 외란상쇄 제어를 고려하였다. 제안한 시스템은 부하토크를 최소차원 상태관측기를 근거로 추정하였다. 따라서 상태관측기를 사용한 속도제어기는 토크에 대한 Feedforward 루프를 조건으로 사용할 수 있으므로 강인한 속도제어 시스템을 실현할 수 있다. 또한 스텝입력 상태의 외란에 대하여 최적제어 시스템 설계를 하였다.