• Journal of Institute of Control, Robotics and Systems
• /
• 제20권2호
• /
• pp.149-156
• /
• 2014

A magnetic compass module must be calibrated accurately before use. Moreover, the calibration process must be performed taking into account any magnetic dip if the magnetic compass module has tilt angles. For this, a calibration method for a magnetic compass module is explained. Tilt error of the magnetic compass module is compensated using a biaxial accelerometer generally. The accelerometer error causes a tilt angle calculation error that gives rise to an azimuth calculation error. For error property analysis, error equations are derived and simulations are performed. In the simulation results, the accuracy of derived error equations is verified. If a biaxial magnetic compass module is used instead of a triaxial one, the magnetic dip and z-axis magnetic compass data must be estimated for tilt compensation. Lastly, estimation equations for the magnetic dip and z-axis magnetic compass data are derived, and the performance of the equations is verified based on a simulation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1593-1597
• /
• 2003

The home service robot supports human beings by performing various kinds of works at home. This paper presents a simple control method for opening a door from the viewpoint of the mobile manipulation. The simulation shows various results of path planning and motion planning for opening a door. The joint trajectories were generated by the simulation system. In general, a six-axis force/torque sensor at an end-effector is needed in order to maintain the static equilibrium of the manipulator. But we show another method. From three components of applied forces which was directly obtained by the three-axis force sensor and three components of applied forces which was indirectly estimated by the joint-torque sensors, all of joint torques that will exactly balance forces at the end-effector in the static situation can be found. It is more practical method than using a six-axis force sensor in a wrist. Experimental results have shown that the opening a door can be realized more effectively from the suggested control method of mobile manipulation.

• The Journal of Korea Robotics Society
• /
• 제9권2호
• /
• pp.124-131
• /
• 2014

The robot mechanisms that were previously researched had only been conducted for the purpose of overcoming the obstacles stably at low speed driving and enhancing the stability against high speed circuitous driving, and yet, the mechanism satisfying two purposes. However, in order to stably drive with high speed on rough terrain, there is a need for satisfying both of these purposes, as well as testing the efficiency of the mechanisms at high speed driving. There, this paper simulated some of the passive mechanisms and focused on checking the performances of passive mechanisms through simulations and analyzing each mechanism on the basis of an evaluation index. The simulation was conducted by Adams (The Multi-body Dynamics Simulation Solution) and used various types of passive mechanisms which were introduced in the robotics field. As a result, the study confirmed that passive mechanisms have a number of situations that affect the driving stability on each direction of roll and pitch. Further study is needed about active mechanism.

• Smart Structures and Systems
• /
• 제14권2호
• /
• pp.247-266
• /
• 2014

Conventional cantilevered piezoelectric energy harvesters (PEHs) are usually fabricated with continuous electrode configuration (CEC), which suffers from the electrical cancellation at higher vibration modes. Though previous research pointed out that the segmented electrode configuration (SEC) can address this issue, a comprehensive evaluation of the PEH with SEC has yet been reported. With the consideration of delivering power to a common load, the AC outputs from all segmented electrode pairs should be rectified to DC outputs separately. In such case, theoretical formulation for power estimation becomes challenging. This paper proposes a method based on equivalent circuit model (ECM) and circuit simulation to evaluate the performance of the PEH with SEC. First, the parameters of the multi-mode ECM are identified from theoretical analysis. The ECM is then established in SPICE software and validated by the theoretical model and finite element method (FEM) with resistive loads. Subsequently, the optimal performances with SEC and CEC are compared considering the practical DC interface circuit. A comprehensive evaluation of the advantageous performance with SEC is provided for the first time. The results demonstrate the feasibility of using SEC as a simple and effective means to improve the performance of a cantilevered PEH at a higher mode.

• The Journal of Korea Robotics Society
• /
• 제3권4호
• /
• pp.323-330
• /
• 2008

This work deals with a 4-DOF flexible continuum robot that employs a spring as its backbone. The mechanism consists of two modules and each module has 2 DOF. The special features of the proposed mechanism are the flexibility and the backdrivability of the whole body by using a spring backbone. Thus, even in the case of collision with human body, this device can ensure safety. The design and the kinematics for this continuum mechanism are introduced. The performance of this continuum mechanism was shown through simulation and experiment.

• Journal of Institute of Control, Robotics and Systems
• /
• 제9권10호
• /
• pp.852-860
• /
• 2003

We introduce the error models for an attitude determination system(ADS) with gyroscopes and stellar sensor. The ADS error models are derived according to the definition of the reference frame and of the attitude error. The equivalent error models applicable to the attitude determination system with large attitude errors are presented. The simulation results show that the proposed error models improve performance of the attitude determination system.

• Journal of Institute of Control, Robotics and Systems
• /
• 제6권6호
• /
• pp.506-513
• /
• 2000

This paper proposes a path planning algorithm for dispensers to increase the productivity in printed circuit board assembly lines. We analyze the assembly sequence of the dispenser, and formulate it as an integer programming problem. The mathematical formulation can accomodate multiple heads and different types of heads through extended cost matrix. The TSP algorithms are then applied to the formulated problem to find the near-optimal solution. Simulation results are presented to verify the usefulness of the proposed scheme.

• Journal of Institute of Control, Robotics and Systems
• /
• 제6권6호
• /
• pp.500-505
• /
• 2000

This paper deals with wafer temperature uniformity control essential in rapid thermal processing (RTP). One of the important control objectives of RTP is to keep the temperature over the wafer surface as uniformly as possible. For this, a discrete time state equation around the operating point is first identified by using the subspace fitting method, and a multivariable LQG(Linear Quadratic Gaussian) controller is designed based on the identified model. Simulation and experimental results show improvement in temperature uniformity over the conventional PID method.

• Journal of Institute of Control, Robotics and Systems
• /
• 제6권6호
• /
• pp.478-485
• /
• 2000

A discrete event systems (DES) is a physical system that is discrete in time and state space, asynchronous (event rather than clock-driven), and in some sense generative(or nondeterministic). This paper presents the design of fifteen modular supervisors to control an experimental CIM testbed. These supervisors are nonblocking, controllable and nonconflicting. After verification of the supervisors by simulation, the supervisors for AGV system have been implemented to demonstrate their efficacy.

• Journal of Institute of Control, Robotics and Systems
• /
• 제6권8호
• /
• pp.617-622
• /
• 2000

In this paper proposed is an $H_{\ifty}$ based flow controller for the ATM networks. The round trip time-delay uncertainty is taken into account and robustness of the proposed controller is analyzed. Maximum allowable time-delay uncertainties are computed with different weightings on performance and robustness. And discussed is a time-domain implementation method of the proposed controller. Time domain simulation with realistic environment demonstrates that the performance of the proposed controller is much better than that of conventional one.