• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.415-415
• /
• 2000

The functions of a mobile robot such as obstacle knowledge and collision avoidance for in-door cleaning are necessary features, as has been much studied in the field of industrial automatic guided vehicle or general mobile robot. A mobile robot, in order to avoid collision with obstacles, has to gather data with environment knowledge sensors and recognize environment and the shape of obstacles from the data. In the study, a wall-following algorithm was suggested as a autonomous moving algorithm in which a mobile robot can recognize obstacles in indoor like environment and do cleaning work in effect. The system suggested in the study is for cleaning of nuclear material dusts generated in the process of nuclear fuel manufacturing and decontamination of devices in disorder which is performed in M6 radioactive ray shield hot-cell in IMEF(Irradiated Material Examination Facility) in the Korea Atomic Energy Research Institute.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2756-2759
• /
• 2000

In this paper. A PID motion controller based on the fuzzy concept is discussed for nonholonomic mobile robot. The difficulties in controlling such a Mobile robot vehicle lies in the fact that it usually has only two degrees of freedom for motion control in a tracking mode. It makes the control of speed and steering possible to decompose the error between the reference posture and the current posture. The Gyro compass is used to measure the position of robot. The proposed nonholonomic mobile robot is shown to follow the reference trajectory and compensate the dynamics. Simulation results are provided to validate the proposed controller. Experiments have been used to verify the effectiveness and robustness of the motion controller.

• 한국군사과학기술학회지
• /
• 제13권5호
• /
• pp.759-768
• /
• 2010

In next war, it will be expected that some requirement such as information acquisition, battlefield surveillance and control, increased power projection, precision attack by guided missile and electronic warfare may have special importance. The use of robot weapon system by Airforce will make up for some weak points of man based weapon system that Airforce currently has. And Airforce man/robot combined air vehicle weapon system can extend military operational theater and give its flexibility in next war where power, mobility and information should be all-in-one for military purpose.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.932-937
• /
• 2003

In this paper, we will explain about the unmanned vehicle control and modeling for combined obstacle avoidance and lane tracking. First, obstacle avoidance is considered as one of the important technologies in the unmanned vehicle. It is consisted by two parts: the first part includes the longitudinal control system for the acceleration and deceleration and the second part is the lateral control system for the steering control. Each system uses to the obstacle avoidance during the vehicle moving. Therefore, we propose the method of vehicle control, modeling and obstacle avoidance. Second, we describe a method of lane tracking by means of vision system. It is important in the unmanned vehicle and mobile robot system. In this paper, we deal with lane tracking and image processing method and it is including lane detection method, image processing algorithm and filtering method.

• 한국자동차공학회논문집
• /
• 제11권6호
• /
• pp.213-221
• /
• 2003

This paper describes a method of lane tracking by means of a vision system which includes vehicle control and modeling. Lane tracking is considered one of the important technologies in an unmanned vehicle and mobile robot system. The current position and condition of the vehicle are calculated from an image processing method by a CCD camera. We deal with lane tracking as follows. First, vehicle control is included in the road model, and lateral and longitudinal controls. Second, the image processing method deals with the lane detection method, image processing algerian, and filtering method. Finally, this paper proposes a correct method for lane detection through a vehicle test by wireless data communication.

• 자동차안전학회지
• /
• 제14권1호
• /
• pp.20-25
• /
• 2022

This paper presents a development of simulation environment for validation of autonomous driving (AD) algorithm based on Robot Operating System (ROS). ROS is one of the commonly-used frameworks utilized to control autonomous vehicles. For the evaluation of AD algorithm, a 3D autonomous driving simulator has been developed based on LGSVL. Two additional sensors are implemented in the simulation vehicle. First, Lidar sensor is mounted on the ego vehicle for real-time driving environment perception. Second, GPS sensor is equipped to estimate ego vehicle's position. With the vehicle sensor configuration in the simulation, the AD algorithm can predict the local environment and determine control commands with motion planning. The simulation environment has been evaluated with lane changing and keeping scenarios. The simulation results show that the proposed 3D simulator can successfully imitate the operation of a real-world vehicle.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.867-872
• /
• 2007

A tracked robot has an excellent mobility on the rough terrain. Especially, a tracked robot for driving has to get structural function in the every field. In this paper, we propose a tracked robot of a small rear wheel typed. Also compared and estimated a driving analysis about the tracked robot in considered the general environment. Compared 2 models are different in size of rear wheels but front wheels are same size each other. From comparing model, the radius of front wheels is 100mm and the radius of rear wheels is 100mm. The radius of front wheels is 100mm and the radius of rear wheels is 70mm from proposed tracked robot. Depend on these radiuses of values we are known driving torque values of an actuating wheel using Recurdyn. And estimated stress of rotated track by an actuating wheel using Ansys. finally, the designed robot has size of $600mm\;{\times}\;330mm\;{\times}\;150mm$, weight is 27kg and the tracked robot is actuated by 2 geared DC motors.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1179-1184
• /
• 2007

An unmaned surveillance robot consists of rifle, laser receiver, thermal imager, color CCD camera, and laser illuminator. A human guard can be replaced with such a robot to take care dangerous surveillance tasks. Currently most of surveillance robots are mounded at a fixed post to take care of surveillance tasks. In order to watch blind areas, it is necessary to modify such a surveillance robot to become a mobile robot. In this paper, simulation based design procedure of mobile surveillance robot has been introduced. 3D CAD geometry model has been produced using Pro-Engineer. Required pen and tilt motor capacities have been analyzed using ADAMS inverse dynamics analysis. A target tracking and stabilization control algorithm of the mobile surveillance robot has been developed in order to stabilize the system from the motion of the vehicle which experiences the rough terrain. ADAMS-Matlab co-simulation has been also carried out to validate the proposed target tracking and stabilization algorithm.

• 전자공학회논문지SC
• /
• 제45권1호
• /
• pp.1-8
• /
• 2008

자유롭고 빠르게 이동할 수 있도록 도와주는 개인 이동 수단인 two-wheel balancing vehicle은 inverted pendulum 시스템의 원리를 이용한 것으로, 최근 들어 많은 연구가 이루어지고 있고 이를 이용한 제품이 실제 사용되고 있다. 본 논문에서는 일반적인 PID 제어이론을 이용한 two-wheel balancing vehicle에 대한 제어성능을 개선시키는 새로운 제어방식을 제안한다. 제안한 방식은 퍼지 PD+I 제어방식으로 향상된 PID 제어의 일종으로 2개의 입력과 1개의 출력을 가진 퍼지시스템에 적분 신호를 더함으로써 출력신호를 만든다. 퍼지시스템의 비선형성은 시간공정에서 비례신호와 미분신호의 가중치를 변화함으로써 최적의 출력제어신호를 만들어낸다. 제안한 퍼지 PD+I 제어방식의 유용성을 알아보기 위해 two-wheel balancing mobile robot에 대해 시뮬레이션과 실험의 결과를 통해, 제안한 퍼지 PD+I 제어방식이 일반적인 PID 방식보다 우수한 성능을 가지고 있음을 알 수가 있다.

• 한국정밀공학회지
• /
• 제28권12호
• /
• pp.1388-1396
• /
• 2011

This paper is focused on the procedure of the development of a micro air vehicle which has vertical take-off and landing capability for indoor reconnaissance mission. Trade studies on mission feasibility led to the proposal of a coaxial rotorcraft configuration as the platform. The survey to provide a guide for preliminary design were conducted based on commercial off-the-shelf platform, and the rotor performance was estimated by the simple momentum theory. To determine the initial size of the micro air vehicle, the modified conventional fuel balance method was applied to adopt for electric powered vehicle, and the sizing problem was optimized with the sequential quadratic programming method using MATLAB. The designed rotor blades were fabricated with high strength carbon composite material and integrated with the platform. The developed coaxial rotorcraft micro air vehicle shows stable handling quality with manual flight test in indoor situation.