• 한국정밀공학회지
• /
• 제10권3호
• /
• pp.133-140
• /
• 1993

In this paper, we prpose a method for tracking optimally a spatial trajectory of the end-effector of flexible robot arms with multiple joints. The proposed method finds joint trajectories and joint torques necessary to produce the desired end-effector motion of flexible manipulator. In inverse kinematics, optimized joint trajectories are computed from elastic equations. In inverse dynamics, joint torques are obtained from the joint euqations by using the optimized joint trajectories. The equations of motion using finite element method and virtual work principle are employed. Optimal control is applied to optimize joint trajectories which are computed in inverse kinematics. The simulation result of a flexible planar manipulator is presented.

• 한국정밀공학회지
• /
• 제11권6호
• /
• pp.20-27
• /
• 1994

This paper presents a controller design to coordinate a robot manipulator under unknown system parameters and bounded disturbance inputs. To control the motion of the manipulator, an inverse dynamics control scheme is applied. Since parameters of the robot manipulators such as mass and inertia are not perfectly known, the difference between the actual and estimated parameters works as a disturbance force. To identify the unknown parameters, an improved adaptive control algorithm is directly derived from a chosen Lyapunov's function candidate based on the Lyapunov's Second Method. A robust control algorithm is devised to counteract the bounded disturbance inputs such as contact forces and disturbing forces coming from the difference between the actual and the estimated system parameters. Numerical examples are shown using three degree-of-freedom planar arm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.156-160
• /
• 1993

This paper presents a controller design to coordinate a robot manipulator under unknown system parameters and bounded disturbance inputs. To control the motion of the manipulator, an inverse dynamics control scheme is applied. Since parameters of the robot manipulators such as mass and inertia are not perfectly known, the difference between the actual and estimated parameters works as a disturbance force. To identify the unknown parameters, an inproved adaptive control algorithm is directly derived from a chosen Lyapunov's function candidate based on the Lyapunov's Second Method. A robust control algorithm is devised to counteract the bounded disturbance inputs such as contact forces and disturbing force coming from the difference between th actual and the estimated system parameters. Numerical examples are shown using three degree-of-freedom planar arm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.327-331
• /
• 1989

This paper concerned about a study on the direct pole placement PID self-tuning controller design for Robot manipulator control system. The method of a direct pole placement self-tuning PID control for a DC motor of robot manipulator tracks a reference velocity in spite of the parameters uncertainties in nonminimum phase system. In this scheme, the parameters of controller are estimated by the recursive least square(RLS) identification algorithm, the pole placement method and diophantine equation. A series of simulation in which minimum phase system and nonminimum phase system are subjected to a pattern of system parameter changes is presented to show some of the features of the proposed control algorithm. The proposed control algorithm which shown are effective for the practical application, and experiments of DC motor speed control for Robot manipulator by a microcomputer IRH-PC/AT are performed and the results are well suited.

• 한국정밀공학회지
• /
• 제3권1호
• /
• pp.50-59
• /
• 1986

Adaptive Model Following Control (AMFC) technique is applied to develop a robot manipulator control system, which can deal successfully with the complex dvnamics of the manipulator. Main concerns of this study are put on the problem reducing the chatter amplitude of control signal yielded by the unit vector control law that was proposed [10] previously for AMFC of the manipulatro, and the effect- iveness of the algorithm when implemented practically. To see the effectiveness of modified method, computer simulations using new and old control law are carried out and compared, and the modified one id implemented in RHINO XR-II robot system recon- structed partially to enable torque control.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(5)
• /
• pp.39-42
• /
• 2000

In this paper we design the robust impedance controller of the robot manipulator with time delay. The designed controller considers time delay in the position loop and stabilizes the closed-loop system. The performance of a controller can be easily degraded by external disturbances. To improve the performance when external disturbances exist, we use the disturbance observer to handle the disturbances in the velocity loop and provide robustness to the control system. To show the validity of the designed controller, several experiments are performed for the 5-DOF robot manipulator equipped with the wrist force/torque sensor system.

• Journal of Mechanical Science and Technology
• /
• 제15권3호
• /
• pp.320-326
• /
• 2001

A Robust controller is designed for cascaded nonlinear uncertain systems that can be decomposed into two subsystems; that is, a series connection of two nonlinear subsystems, such as a robot manipulator with actuators. For such systems, a recursive design is used to include the second subsystem in the robust control. The recursive design procedure contains two steps. First, a fictitious robust controller for the first subsystem is designed as if the subsystem had an independent control. As the fictitious control, a nonlinear H(sub)$\infty$ control using energy dissipation is designed in the sense of L$_2$-gain attenuation from the disturbance caused by system uncertainties to performance vector. Second, the actual robust control is designed recursively by Lyapunovs second method. The designed robust control is applied to a robotic system with actuators, is which the physical control inputs are not the joint torques, but electrical signals to the actuators.

• 한국통신학회논문지
• /
• 제19권1호
• /
• pp.183-193
• /
• 1994

본 논문에서는 가정모드(assumed mode) 방법과 Lagrange 방식을 이용하여 유연성 로봇 매니퓰레이터의 동력학 방정식을 구하였으며, 조인트 구동기를 포함한 유연성 로봇 매니플레이터에 대한 제어기를 설계를 하였다. 제어기는 매개변수 추정부와 적응제어기로 구성하였으며, 매개변수 추정부는 RLS알고리즘을 이용하여 ARMA예측모델의 매개변수를 추정하도록 하였다. 적응제어기는 기준모델(reference)과 최소예측오차제어기(minimum prediction controller)로 구성하였다.

• 한국통신학회논문지
• /
• 제17권12호
• /
• pp.1333-1342
• /
• 1992

본 논문은 제어 입력 u(t)에 대하여 비선형 결합된 3차 미분 방정식으로 표현되는 조작기를 갖는 로보트 매니퓰레이터에 대하여 제어기의 설계에 관한 논문이다. 제어 방식은 두 단계로 구성되며, 첫째 단계로는 비결합된 제어가능한 선형 계통을 얻기 위하여 대역적(global)선형화를 수행하며, 둘째 단계로는 선형화 계통에 대하여, 모델의 불확실성이 존재하는 경우에도 강건성과 안정도를 보장하도록 Lyapunov 방정식과 전체 안정도 이론을 적용하여 제어기를 설계한다. 제안된 제어기를 조작기가 포함된 자유도가 3인 로보트 매니퓰레이터에 대하여 컴퓨터 시뮬레이션을 하였다.

• Journal of Biosystems Engineering
• /
• 제25권1호
• /
• pp.63-70
• /
• 2000

In Korea, researches for year-round leaf vegetables production system are in progress and the most of them are focused on environment control. Automation technologies for harvesting , transporting and grading need to be developed. This study was conducted to develop harvesting process automation system profitable to a competitive price. 1. Manipulator and end-effector are to be designed and fabricated , and fuzzy logic controller for controlling these are to be composed. 2. The entire system constructed is to be evaluated through a performance test. A robot system for harvesting a lettuce was developed. It was composed of a manipulator with 20DOF (degrees of freedom) an end-effector, a lettuce feeding conveyor , an air blower , a machine vision device, 6 photoelectric sensors and a fuzzy logic controller. A fuzzy logic control was applied to determined appropriate grip force on lettuce. Leaf area index and height index were used as input parameters, and voltage was used as output parameter for the fuzzy logic controller . Success rate of the lettuce harvesting system was 93.06% , and average harvesting time was about 5 seconds per lettuce.