• 대한기계학회논문집A
• /
• 제32권3호
• /
• pp.223-231
• /
• 2008

This paper introduces a robot called the MRINSPECT V (Multifunctional Robotic crawler for Inpipe in-SPECTion V) for the inspection of pipelines with a nominal 8-in inside diameter. Based on the mechanism of the previous model MRINSPECT IV, we developed a new MRINSPECT V by using the differential driving mechanism, so that just simply controlling the speed of each driving units helps the robot to travel effectively inside the pipelines. Furthermore, the robot uses clutches in transmitting driving power to wheels. This clutch mechanism enables MRINSPECT V to select the suitable driving method according to the shape of pipeline. In this paper, the critical points in design and construction of the proposed robot are described with the preliminary results to provide good mobility and increase the efficiency.

• 한국정밀공학회지
• /
• 제30권1호
• /
• pp.18-23
• /
• 2013

Omni-directional robot is a typical holonomic constraint robot that has three degrees of freedom movement in 2D plane. In this study, a new omni-directional robot whose wheels are arranged in radial directions was proposed to improve driving performance of the robot. Unlike a general omni-directional robot whose wheels were arranged in a circumferential direction, moments do not arises in the proposed robot when the robot travels in a straight line. To analyze driving performance, dynamic modeling of the omni-directional robot, which considers friction and slip, was carried out. By friction measurement experiments, the relationship between dynamic friction coefficient and relative velocity was derived. Dynamic friction coefficient according to the angle difference between robot travel direction and wheel rotation direction was also obtained. By applying these results to the dynamic model, driving performance of the robot was calculated. As a result, the proposed robot was 1.5 times faster than the general robot.

• 로봇학회논문지
• /
• 제6권4호
• /
• pp.323-333
• /
• 2011

Due to the limited pendulum motion range, the conventional one-pendulum driven spherical robot has limited driving capability. Especially it can not drive parallel direction with center horizontal axis to which pendulum is attached from stationary state. To overcome the limited driving capability of one-pendulum driven spherical robot, we introduce a spherical robot, called KisBot II, with a new type of curved two-pendulum driving mechanism. A cross-shape frame of the robot is located horizontally in the center of the robot. The main axis of the frame is connected to the outer shell, and each curved pendulum is connected to the end of the other axis of the frame respectively. The main axis and pendulums can rotate 360 degrees inside the sphere orthogonally without interfering with each other, also the two pendulums can rotate identically or independent of each other. Due to this driving mechanism, KisBot II has various motion generation abilities, including a fast steering, turning capability in place and during travelling, and four directions including forward, backward, left, and right from stationary status. Experiments for several motions verify the driving efficiency of the proposed spherical robot.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권3호
• /
• pp.3-7
• /
• 2007

There have been numerous studies directed toward the development of driving mechanisms for off-road mobility and rescue robots. To achieve surveillance, reconnaissance, and rescue, it is necessary for robots to have a driving mechanism that can handle off-road environments, We propose a new type of single-track driving mechanism with a variable geometry for a rescue robot, This mechanism has a symmetric configuration so that the robot can advance in two directions and also remain operable when overturned. By transforming its geometry, the robot can reduce energy consumption in steering and rotating as well as maximize its ability to climb obstacles such as stairs. The robot is also designed to have a compact size and low center of gravity to facilitate driving when on a set of stairs. In this paper, we analyzed the design parameters of the robot for the four phases of climbing stairs and determined the specifications needed to enhance its adaptability.

• 로봇학회논문지
• /
• 제5권2호
• /
• pp.135-142
• /
• 2010

Security robot has gradually developed and deployed in order to protect civilian's lives as well as fortune and subjugate the shortcomings of CCTV which lacks of mobility. We have developed a security robot for outdoor environment and the main purpose of the driving mechanism is to overcome the bumps or projections with high speed. The robot platform consists of 4 omnidirectional wheel-based driving mechanisms and suspension for each driving mechanism. In this paper, principal suspension parameters of outdoor security robot for overcoming obstacles with stability are studied and approximately optimized using Response Surface Methodology (RSM) since it is difficult to find the exact relationship between suspension parameters and the shock, which is significantly associated with stability of the robot, at the robot platform. Simulation using ADAMS is conducted for assessing the feasibility of optimized design parameters.

• 대한임베디드공학회논문지
• /
• 제12권4호
• /
• pp.213-221
• /
• 2017

Utilizing the existing polishing robot prevents unrestricted change of direction, driving, and identification of driving pathway. To overcome this barrier, driving mechaism has been designed with Omniwheels with encoders and RSSI method of beacon system has been utilized to identify the driving path by position recognition. Due to the wheel characteristics, the Omniwheel mobile robot generates greater slip than the conventional mobile robot, which reduces its driving accuracy. Therefore, to improve the driving accuracy, the localization is conducted through the fusion of encoder and RSSI of beacon data to compensate for the errors caused by Dead Reckoning and inaccuracy of sensors. Finally, the localization accuracies of the proposed and conventional indoor localization method are compared to show effectiveness of the proposed driving control for a polishing robot.

• 터널과지하공간
• /
• 제32권3호
• /
• pp.231-242
• /
• 2022

본 연구에서는 지하광산에서 로봇의 위치를 추정하고, 여러 경유지를 거쳐 주행한 후 원위치로 복귀하는 ROS (Robot Operating System) 기반의 자율주행 로봇을 개발하였다. 자율주행 로봇은 SLAM (Simultaneous Localization And Mapping) 기술을 활용하여 주행 경로에 대한 전역 지도를 사전에 생성한다. 이후, 라이다 센서를 통해 측정되는 벽면의 형태와 전역 지도를 매칭하고 AMCL (Adaptive Monte Carlo Localization) 기법을 통해 데이터들을 융합하여 로봇의 위치를 보정한다. 또한, 라이다 센서를 통해 전방 주행환경을 인지하고, 장애물을 회피한다. 개발된 자율주행 로봇을 활용하여 지하광산 현장을 모사한 실내 실험장을 대상으로 주행 실험을 수행하였다. 그 결과, 자율주행 로봇은 다중 지점의 경유지에 대해 순차적으로 주행하고 장애물을 회피하며 안정적으로 복귀하는 것을 확인할 수 있었다.

• 로봇학회논문지
• /
• 제5권2호
• /
• pp.110-119
• /
• 2010

This paper aims to add the autonomous driving capability to the inverted pendulum system which maintains the inverted pendulum upright stably. For the autonomous driving from the starting position to the goal position, the motion control algorithm is proposed based on the dynamics of the inverted pendulum robot. To derive the dynamic model of the inverted pendulum robot, a three dimensional robot coordinate is defined and the velocity jacobian is newly derived. With the analysis of the wheel rolling motion, the dynamics of inverted pendulum robot are derived and used for the motion control algorithm. To maintain the balance of the inverted pendulum, the autonomous driving strategy is derived step by step considering the acceleration, constant velocity and deceleration states simultaneously. The driving experiments of inverted pendulum robot are performed while maintaining the balance of the inverted pendulum. For reading the positions of the inverted pendulum and wheels, only the encoders are utilized to make the system cheap and reliable. Even though the derived dynamics works for the slanted surface, the experiments are carried out in the standardized flat ground using the inverted pendulum robot in this paper. The experimental data for the wheel rolling and inverted pendulum motions are demonstrated for the straight line motion from a start position to the goal position.

• 제어로봇시스템학회논문지
• /
• 제20권5호
• /
• pp.551-556
• /
• 2014

This paper proposes a balancing control and driving control of a bicycle robot based on dynamic modeling of the bicycle robot, which has been derived using the Lagrange equations. For the balancing control of the bicycle robot, a reaction wheel pendulum method has been adopted in this research. By using the dynamics equations of the bicycle robot, an LQR controller has been designed for a balancing and driving control of a bicycle robot. The performance of the balance control is verified experimentally before the driving control, which shows a stable posture within one degree vibrations. To show the dynamic characteristics of the bicycle robot during driving, a trapezoidal velocity trajectory is selected as the references. Through simulations and real experiments, the effectiveness of the proposed algorithm has been demonstrated.

• 전기전자학회논문지
• /
• 제25권1호
• /
• pp.148-155
• /
• 2021

로봇 기술이 발전함에 따라 모바일 로봇의 주행 시스템에 대한 연구가 활발히 진행되고 있다. 2륜 및 4륜의 휠을 기반으로 구성되는 모바일 로봇의 주행 시스템은 직선과 같은 단반향 주행에 장점이 있으나 방향 전환 및 제자리 회전에 단점을 가지고 있다. 볼을 휠로 사용하는 볼 로봇은 전방향 이동에 장점이 있으나, 구조적인 불안정한 특성에 의해 균형을 유지하기 위한 자세 제어 및 이동을 위한 주행 제어가 요구된다. 기존의 볼 로봇은 모터에 부착된 엔코더를 이용하여 주행제어를 위한 위치를 추정함으로써 오차가 누적되는 한계를 가지고 있다. 본 연구에서는 영상처리를 통해 볼 로봇의 위치 좌표를 추정하고, 이를 주행 제어에 사용하는 주행 제어 시스템을 제안하였다. 볼 로봇의 위치를 추정하기 위한 영상처리부, 통신부, 표시부 및 제어부를 포함하는 볼 로봇의 주행 제어 시스템을 설계 및 제작하고, 주행 제어 시스템을 적용한 볼 로봇의 주행 실험을 통해 x축 방향 ±50.3mm 및 y축 방향 ±53.9mm의 오차범위 이내에서 오차의 누적 없이 제어됨을 확인하였다.