• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.716-719
• /
• 1999

In this paper, a real-time control system for robot manipulator is implemented using real-time operating system with capabilities of multitasking, intertask communication and synchronization, event-driven, priority-driven scheduling, real-time clock control, etc. The hardware system with VME bus and related devices is developed and applied to implement a dynamic learning control scheme for robot manipulator. Real-time performance of the proposed dynamic learning controller is tested for tasks of tracking moving objects and compared with the conventional servo controller.

• Proceedings of the IEEK Conference
• /
• 2002.06c
• /
• pp.21-24
• /
• 2002

We proposed the intelligent system to control prosthetic robot. The proposed intelligent system was used competitive network, SOFM and LVQ, and consisted of pre-processing part and associative part. A pre-processing part was processed EMG signal and associative part was outputted signal to control prosthetic robot. To verify the effectiveness, we adapted to 2 link manipulator for korean consonant.

• Journal of the Ergonomics Society of Korea
• /
• v.6 no.2
• /
• pp.19-28
• /
• 1987

If an error occurs in the automatic mode when the advanced teleoperator system performs a task in hostile environment, then the mode changes into the manual mode. The operation by program and the operation by hyman recover the error in the manual mode. The system resumew the automatic mode and continues the given task. In order to utilize the inverse kinematics as means of the operation by program in the manual mode, Lee and Nagamachi determined the end point of the robot trajectory planning which varied with the height of the task object recognized by a T.V monitor, solved the end point by the fuzzy set theory, and controlled the position of the robot hand by the inverse kinematics and the posture of the robot hand by the operation by human. But the operation by human did take a lot of task time because the position and the posture of the robot hand were separately controlled. To reduce the task time by human, this paper developes an error recovery expert system (ERES). The position of the robot hand is controlled by the inverse kinematics of the cartesian coordinate system to the end point which is deter- mined by the fuzzy set theory. The posture of the robot hand is controlled by the modulality of the robot hand's motion which is made by the posture of the task object. The knowledge base and the inference engine of the ERES is developed using the muLISP-86 language. The experimental results show that the average task time by human the ERES which was performed by the integration of the position and the posture control of the robot hand is shorter than that of the research, done by the preliminary experiment, which was performed by the separation of the position and the posture control of the robot hand. A further study is likely to research into an even more intelligent robot system control usint a superimposed display and digitizer which can present two-dimensional coordinate of the work space for the convenience of human interaction.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.2
• /
• pp.89-96
• /
• 2016

This paper describes the design of a force measurement and communication system for the force measuring system in industrial robots. The force measurement and communication system is composed of a multi-axis force sensor and a controller for measuring the forces (x-direction force, y-direction force and z-direction force) and sending the measured forces to the robot's controller (PLC: Programmable Logic Controller). In this paper, the force measurement and communication system was designed and fabricated by using a DSP (Digital Signal Processor). An environment test and a grinding and deburring test using an industrial robot with the force measurement and communication system with three-axis force sensor were carried out to characterize the system. The tests showed that the system could safely measure the forces from the three-axis force sensor and send the measured forces to the industrial robot's controller while the grinding and deburring test was performed. Thus, it is thought that the fabricated force measurement and communication system could be used for controlling the force for an industrial robot's grinding and deburring.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2779-2782
• /
• 2003

A tole-robot system for remote home-management has been developed. The tele-robot system is composed of a mobile robot system, server-computers and client-computers. The robot system is equipped with wireless camera and wireless controller so that the robot system captures the image remotely User makes the robot control command referring to the image feedback through internet. With such tole-robot system, the user can monitor and watch the inside of home by remotely maneuvering the mobile robot. The user can also save the received image of suspected scene on the client computer. Utilizing such function of tele-robot system, remote home-management and possible crime avoidance could be achieved.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.7
• /
• pp.720-727
• /
• 2009

This paper proposes a new integrated navigation system for a mobile robot in indoor environments. This system consists of five frameworks which are classified by function. This architecture can make the navigation system scalable and flexible. The robot can recover from exceptional situations, such as environmental changes, failure of entering the narrow path, and path occupation by moving objects, using the exception recovery framework. The environmental change can be dealt with using the probabilistic approach, and the problems with the narrow path and path occupation are solved using the ray casting algorithm and the Bayesian update rule. The proposed navigation system was successfully applied to several robots and operated in various environments. Experimental results showed good performance in that the exception recovery framework significantly increased the success rate of navigation. The system architecture proposed in this paper can reduce the time for developing robot applications through its reusability and changeability.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.1
• /
• pp.100-112
• /
• 1996

This paper presents a design experience of a control language for coordination of a multi-robot system. To effectively program job commands, a Petrinet-type Graphical Robot Language(PGRL) is proposed, where some functions, such as concurrency and synchronization, for coordination among tasks can be easily programmed.In our system, the proposed task commands of PGRL are implemented by employing formal model languages, which are composed of three modules, sensory, data handling, and action module. It is expected that by using our proposed PGRL and formal languages, one can easily describe a job or task, and hence can effectively operate a complex real-time and concurrent system. The control system is being implemented by using VME-based 32-bit microprocessor boards for supervisory, each module controller(arm, hand, leg, sensor data processing module) and a real time multi-tasking operating system(VxWorks). (author). 17 refs., 16 figs., 2 tabs.

• Journal of the Korean Society of Safety
• /
• v.31 no.5
• /
• pp.28-34
• /
• 2016

When a electric power cable is installed in the air for newly or exchanged working, it is necessary at all time to hold a constant tension for an overhead power cable. And also a pendanted power cable is an extreme job to have work in a high sky. For this reason, the objective of this paper developments working robot for preventing disaster that tension of cable installed automatically power cable to hold a constant. So the working robot works at all the time two tasks for mobil and tension it come into a inference between two tasks, control is difficult. Control methode needs to suppress inference of two tasks. In this paper, for installation of overhead power cable, the scheme and control methode of working robot is presented. the robot work at a same time tow tasks that have hold a constant tension of the power cable and move a constant place while unfasten a winding cable at a drum on a chassis. Working robot consist of three parts with mobile system, tension system and control part. As it is applied the feedback/feedforward control, methode of hybrid control is established to suppress that interference come into between two tasks. The simulation programs is made out using models of mobil and tension system, and a proposed controllers. In accordance with simulation, the model of each systems is discussed to make out proper. And also parameters of controllers is selected a suitable value and the driving performance of robot is evaluated.

• Journal of Welding and Joining
• /
• v.16 no.3
• /
• pp.129-140
• /
• 1998

An interface system was developed to offer the welding capability to a robot controller which had not any embedded function for arc welding before, and also an arc sensor algorithm was proposed for weld seam tracking of the welding robot. For the interface system between the robot controller and welding equipments, data communication software and interface connections were composed. The interface system was mae to correspond welding condition, correction data, operation sequence and current status with the robot controller by mutual had shaking and digital signal transfer. Graphic user interface program developed under the environment of windows made it easy to monitor data communication and operation status, and to control welding and sensing sequence. Arc sensing algorithm proposed in this study to compensate torch position error was based on a fuzzy logic with the variables of current difference and current differenced change at torch weaving extremities. The developed interface system could be successfully implemented in between welding equipments and the robot controller, and showed normal status and exact function in data and signal communication between the systems. The whole robot welding system was then examined to verify its welding and seam tracking capabilities in horizontal fillet, vertical fillet, and 3-dimensional fillet weldment. The experiments revealed sound weld bead shapes and also good seam tracing results.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1997.10a
• /
• pp.263-266
• /
• 1997

In this paper we will develope the immnized recurrent neural network control system of a robot manipulator with high robustness in dynamically changing environment conditions. Immune system detects and eliminates the non-self materials called antigen such as virus, bacteria and so on which come from inside and outside of the living system, so plays an important role in maintaining its own system against dynamically changing environments. We apply this concept to a robot manipulator and evaluate the effectiveness of the above proposed system.