• Resources Recycling
• /
• v.7 no.4
• /
• pp.64-75
• /
• 1998

The purpose of this study is to produce high putity composite powder composed of Fe-oxide, Mn-oxide and Mn-ferrite having superior homogencity in composition and particle size distribution by co-roasting process. Binary component metal (Fe, Mn) chloride solutions were produced by dissolving mill scale and ferro-mangancse alloy in hydrochloric acid. These chloride solutions contained the impurities such as SiO$_{2}$, P, Al, Ca and Na, which were originated from the Fe/Mn source materials. The neutralization and polymeric coagulant method were adoped to refine the hydrochloric liquor. When pH is far below the isoelectric point (pH 2-3), the SiO$_{2}$ was the most effectively reduced element, while other impurities remained unchanged. By increasing pH above 3, most of the impurities could be reduced effectively due to the coprecipitation reaction. The polymeric coagulants such as poly vinyl alcohol, resin amine and ammonium molybdate were found to have no effect on the spray roaster designed by the authors. The produced oxide powders were confirmed to be mixtures of Fe-oxide, Mn-oxide and mn-ferrite. the powders were homogeneously mixed and the particle size increased sleeply with increasing co-roasting temperature.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.537-540
• /
• 2006

국제 유가의 상승으로 대체 에너지개발의 필요성이 대두되고 있는 지금 수송연료인 디젤의 대체 원료로 바이오디젤이 부각되었다. 차세대 대체연료인 바이오디젤의 합성 원료의 국산화로 수급의 안정성과 농가소득향상을 위해서 국내산 유채 착유기의 개발 및 유지의 함량을 측정하고 바이디젤로서의 적용가능성을 살펴보며 유박에서의 유지 추출 Biomass활용방안을 도출한다 국내산 유채 착유기 및 착유기술 평가를 통해 중소형 유채 착유기의 제작과 기본 조건을 도출을 위해 유채 착유실험을 진행하였다. 유채유의 착유온도에 따른 물성변화와 산가, 수분, 착유율의 변화와 영향을 확인하기 위해 roaster의 온도를 고온과 저온으로 나누어 착유하여 각각의 물성 실험과 산가, 수분, 착유율을 측정 비교하였다. 유채유는 저온보다 고온에서 착유량이 높으나 많은 검질과 높은 산가로 인해 바이오디젤 합성과정에 많은 어려움을 나타내었다. 유채의 유박을 바이오디젤과 에탄올로 각각 Extraction.한 결과 바이오디젤보다는 에탄올이 적용 가능성이 높음을 확인하였다.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.4
• /
• pp.464-471
• /
• 2011

Sesame oil is a simple pressed oil as unrefined oil. During manufacturing process of roasting-expression, benzo(a)pyrene[B(a)P] formed as a strong carcinogenic substance is cause a social problem. In manufacturing process of sesame oil, it had following the forming pathway of benzo(a)pyrene[B(a)P] as well as minimizing plan of B(a)P formation. Suitable roasting condition by roaster was during 15~20min at $220^{\circ}C$, B(a)P content in sesame oil was $1.35{\sim}1.57{\mu}g/kg$. Between roasting temperature and/or roastingtime and forming amount of B(a)P was showed a linear correlation. As a point of view the turbidity and yield of final product, roasting process of the more regular level was required.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.4
• /
• pp.790-796
• /
• 2013

The following is the study result of herbal tea roasted at different temperatures between $80{\sim}140^{\circ}C$. Depending on treatment temperature the water content decreased, some carbonization occurred and crude ash content relatively increased. Also crude protein and crude fat changed little. Benzopyrene content (0.17~0.35ppb) showed a tendency to increase with higher treating temperature. From this result, the $B({\alpha})P$ content differed depending on the treatment temperature and raw materials. In case of roasting, the actual inside temperature is around $200^{\circ}C$ but since the surface temperature of the roaster reaches around $2,000^{\circ}C$ some portion of $B({\alpha})P$ content was presumed to be produced from the area that came in contact with this surface. Solid elution rate of herbal tea showed 0.18~0.35%(w/w) and the rate of solid elution decreased with higher roasting temperature. There was no big change in $80{\sim}110^{\circ}C$ treatment section but the solid elution decreased rapidly in $110{\sim}140^{\circ}C$ section. The reason for decreasing solid elution rate at higher treatment temperature is because the compact inner tissue makes elution difficult.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.4
• /
• pp.703-710
• /
• 2014

The following is the study result of herbal tea roasted at different temperatures between $80{\sim}140^{\circ}C$. Depending on treatment temperature the water content decreased, some carbonization occurred and crude ash content relatively increased. Also crude protein and crude fat decreased little. Solid elution rate of herbal tea showed 0.15~0.32%(w/w) and the rate of solid elution decreased with higher roasting temperature. There was no big change in $80{\sim}110^{\circ}C$ treatment section but the solid elution decreased rapidly in $110{\sim}140^{\circ}C$ section. The reason for decreasing solid elution rate at higher treatment temperature is because the compact inner tissue makes elution difficult. Benzopyrene content (0.29~0.51ppb) showed a tendency to increase with higher treating temperature. From this result, the $B({\alpha})P$ content differed depending on the treatment temperature and raw materials. In case of roasting, the actual inside temperature is around $200^{\circ}C$ but since the surface temperature of the roaster reaches around $2000^{\circ}C$ some portion of $B({\alpha})P$ content was presumed to be produced from the area that came in contact with this surface. When the processing which is a main component of food carbohydrate, protein, fat reason despite serve heat treatment as a whole is to be detected even though the $B({\alpha})P$ in this way is considered to be.

• Resources Recycling
• /
• v.9 no.5
• /
• pp.28-32
• /
• 2000

In this study, the new processing method to produce magnetite for mono-component black toner was studied using spray roaster. The produced magnetite is compared with TMB 125 made by Magnox, USA. When the weight ratio of the ferrous chloride and the ferric chloride is varied from 3:7~7:3 under $N_2$ atmosphere, the 100% major phase of magnetite is obtained. However, when the content of he ferrous chloride is higher than 70wt%, the content of FeO is increased. The phase of $\Gamma-Fe_2O_3$ is shown in th range of over 70wt% of the ferric chloride. The magnetite produced by spray roasting has a saturation magnetization of 80~85 emu/g and a coercivity of 110~130 Oe. The shape of the particle is irregular sphere and hte size of the magnetite is the range of $0.3~0.5\mu\textrm{m}$. It is shown that the magnetite made by spary roasting is enough to apply to the magnetic material of toner.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.1
• /
• pp.135-143
• /
• 2015

This study evaluated fuel properties of composite materials which were prepared by mixing a waste activated carbon from the used purifier filter with torrefied wood powder. Wood species of the raw material of torrefied wood powder are oak wood (Quercus serrata Thunb. ex Murray) and pine wood (Pinus densiflora Siebold & Zucc). And the treatment conditions used for this study were 300 s, 450 s, and 600 s at $200^{\circ}C$ for the wood roaster. Also, the mixing ratios are 5 : 95, 10 : 90, 15 : 85, 20 : 80, 40 : 60, 60 : 40 and 80 : 20 (waste activated carbon : torrefied wood powder). The fuel properties such as highly heating value (HHV), elementary analysis and ash content were evaluated. The results obtained are followings; 1. Despite the same treatment condition of wood roasting, pine wood has higher carbon contents than oak wood. Therefore, pine wood indicated the optimum carbonization at low temperature and short treatment times. 2. The gross calorific value and ash content increased as the mixing ratio of waste activated carbon increased. 3. Mixtures of the waste activated carbon and torrefied wood powder showed greater gross calorific value than those of the mixtures of waste activated carbon and the untreated wood powder. Also, the pine wood resulted in higher heating value that thaose of the oak wood. 4. When composite fuels that were composed waste activate carbon and wood powder are used, higher temperature conditions are required because the combustion is incomplete at $800^{\circ}C$ and 4 hours. 5. The increasing rate of the gross calorific value of mixtures of waste activated carbon and untreated wood powder is higher than does the mixtures of waste activated carbon and torrefied wood powder. Also, this phenomenon is more obvious for pine woods. Therefore, an optimal mixing ratio of waste activated carbon was determined to be between 5% and 10% (wt%). Also, this condition satisfied the requirement of the No.1 grade of wood pellet.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.26 no.3
• /
• pp.390-396
• /
• 1997

Meju is a basis for manufacturing Kanjang, Meju was traditionally prepared at home by different types of process depending on the regional area. It is necessary to standardize and simplify the process of Meju-preparation for Kanjang of good quality. For these purposes, the process of Meju and Kangjang making as well as analysis of commercial Kanjang, were compared. Generally, traditional Meju was prepared by steeping and dehulling the whole soybean. After steeping for 24hr. soybean absorbed water up to 110~120% of its weight. The soaked soybeans were steamed for 2hr. and cooled to 5$0^{\circ}C$. Cooked soybeans were crushed down to the size of 10~15 mesh and molded. Molded soybeans were dried for 2 days in the air, hung up by rice straw and fermented for 20~30 days under natural environmental condition. On the other hand, commercial soybean koji was made of defatted soybean. Defatted soybeans were steeped in water and steamed for 15~30min at 0.7~1.2 kg/$\textrm{cm}^2$. Steamed and defatted soybean was cooled to 4$0^{\circ}C$. Separately, wheat power was roasted at 200~30$0^{\circ}C$ by wheat roaster. Mixture of steamed defatted soybean and roasted wheat powder (5/5 to 7/3) were inoculated with 0.1~0.2% Aspergillus sojae and incubated for 2 days at 3$0^{\circ}C$ with occasional stirring. Chemical analysis showed that traditional soy sauces contained the following composition: NaCl, 20.12~25.42%; total nitrogen, 0.64~0.91%; pure extract, 9.47~11.20%; color, 2.34~4.01; pH, 4.92~5.12. Commercial products contained: NaCl, 15.20~17.19%; total nitrogen, 1.25~1.40%; pure extract, 18.17~21.47%; color, 5.41~21.12; pH, 4.51~4.66 and ethalnol. 2.97~3.12%. Organoleptic test on taste, color and flavor of traditional and commercial soysauce indicated that most of the consumers prefer commercial products to traditional products. Preferrable formulation of Kanjang based on organoleptic test of soy sauces was assumed as containing; NaCl, 16.0%; total nitrogen, 1.40%; pure extract, 19.97%; color, 12.98; pH, 4.61 and ethanol, 2.96.

• Resources Recycling
• /
• v.8 no.4
• /
• pp.45-56
• /
• 1999

The purpose of tlus sludy was to preparc raw material powder for Mn-Zn iclrile, h m mined mill scale and fero-Mn, usins a co-spray roasting process The mill scale and ferra-Mn uscd in this raalins process was rcf~nedb y mesn-ns of a slxc~apl rxcss ~nvolvinm~a te~ialsc ontalning imp~u-ltleso r less than 100 pprn In this study an effeclive spray roaster system. wllich produces fme complex oxide powder, collects produccd ~owder.,m d prcvel~tse ~~llssiooifi HCI gas. was also manufactured. By means of spray~ngp urifcd raw malerial solu~lionl nln a manufacued high tcmpervture rumace. &-ferrite powder and a comnpleu o ~ d e powder of Fe,O; and M,x203 were manufactured. The chmcterlstics of the composllion. surface urca, and p'miicle size dismbulion or the produced powder were exmined. ptoduced powdcr was then ~ m e dwi tli ZnO powder. aid olher addilives of defined cornposnion, and Mn-Zn femite cares werc praiuccil by meuns of Sorlning and closely controlled sintering processes. The magpelic p~oprlieso f c olo~ss, initlal permeability. mauin~u~mnn agnehc flux. coz~civcr orcc and residual magnccic flux for the above cores we,= measured, and fmm Il~ase I-csulls the eflicacy of lhe co-spray roasling pncess to pl.ellare raw material powder lor Mn-Zn ferntc was established

• Korean Journal of Food Science and Technology
• /
• v.41 no.4
• /
• pp.362-368
• /
• 2009

Roasting may lead to the formation of undesired compounds, such as polycyclic aromatic hydrocarbons (PAHs). In this study, green coffee beans were roasted under controlled conditions and the formation of PAHs during the roasting process was monitored. Roasting was performed in a hot air roaster, with an inlet air temperature varying from 150 to $250^{\circ}C$ for 5, 10, and 20 min. The PAH content of the roasted coffee was then evaluated by HPLC-FLD. The levels of total PAHs in Arabica (Colombia, Brazil) and Robusta (India) coffee samples were 1.26-215.07, 1.85-178.14, and 0.18-2.61 ${\mu}g$/kg, respectively.