• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.1-8
• /
• 2021

This study developed low-cost and high-efficiency pavement condition monitoring technology to produce the key information required for pavement management. A noise and artificial intelligence-based monitoring system was devised to compensate for the shortcomings of existing high-end equipment that relies on visual information and high-end sensors. From idea establishment to system development, functional definition, information flow, architecture design, and finally, on-site field evaluations were carried out. As a result, confidence in the high level of artificial intelligence evaluation was secured. In addition, hardware and software elements and well-organized guidelines on system utilization were developed. The on-site evaluation process confirmed that non-experts could easily and quickly investigate and visualized the data. The evaluation results could support the management works of road managers. Furthermore, it could improve the completeness of the technologies, such as prior discriminating techniques for external conditions that are not considered in AI learning, system simplification, and variable speed response techniques. This paper presents a new paradigm for pavement monitoring technology that has lasted since the 1960s.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.2
• /
• pp.29-40
• /
• 2010

Car simulation by TRANSIMS is able to rapidly analyze the broad area based on CA(Cellular Automata) theory, which is the great advantage compared to other existing programs. As the source code of TRANSIMS is open, it may be modified by incorporating the network and traffic characteristics. This study uses the traffic thematic map built in the Korean National Traffic DB(KTDB) center among input date used for building network data of TRANSIMS. However, because the traffic thematic map is not composed as the type required by TRANSIMS, it was corrected and complemented to build a network, and the traffic volume at arterial roads and the traffic volume at each direction of the intersection was calculated through simulation for the area of Suseong-Gu, Daegu Metro. This was compared to the actual traffic volume. As a result of the simulation, it shows error from 14% to 42% at intersection, and from 3% to 8% at arterial roads. This result is very satisfactory because the entire traffic volume of Daegu Metro was not considered, and the tendency of drivers avoiding path due to construction on certain section, the status of road surface and chronic congestion was not reflected.

• Journal of the Society of Disaster Information
• /
• v.16 no.3
• /
• pp.449-457
• /
• 2020

Purpose: The Seoul Metropolitan Government classifies the cavity risks into emergency, priority, general, and observation grades in consideration of the cavity size, asphalt pavement thickness, and pavement depth based on the cavity management grade criteria of Seoul. In this study, the depth of cracking was measured at 17 cracks identified by checking the pavement condition of the cavity at 265 cavities found in the 2019 cavity investigation service. Method: In the first phase, crack width and depth were measured using a vernier caliper, taper gauge, and depth gauge to check the cracks of the identified cavities. In the second phase, the location of the largest crack in the upper road surface was confirmed, and A.C. was drilled to further measure the crack depth. Results: As a result, the cavity management level was raised in nine of the 17 test cavity identified. Therefore, in case of emergency and priority recovery, the grade should be adjusted according to the depth of pavement crack and the thickness of residual A.C. pavement. Conclusion: In the case of cracks in the upper part of the cavity, the crack progression must be determined through the perforation and the remaining asphalt concrete thickness must be determined to determine the cavity grade.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.139-145
• /
• 2011

The practice of asphalt pavement recycling has grown rapidly over the decade, one of which is the cold in-place recycling with the foamed asphalt (CIR-foam) or the emulsified asphalt (CIR-emulsion). Particularly, in Iowa, the CIR has been widely used in rehabilitating the rural highways because it significantly increases the service life of the existing pavement. The CIR layer is typically overlaid by the hot mix asphalt (HMA) to protect it from water ingress and traffic load and obtain the required pavement structure and texture. Most public agencies have different curing requirements based on the number of curing days or the maximum moisture contents for the CIR before placing the overlay. The main objective of this study is to develop a moisture loss index that the public agency can use to monitor the moisture content of CIR layers in preparation for a timely placement of the wearing surface. First, the moisture contents were measured in the field using a portable time domain reflectometry (TDR) device. Second, the weather information in terms of rain fall, air temperature, humidity and wind speed was collected from the same location. Finally, a moisture loss index was developed as a function of initial moisture content, air temperature, humidity and wind speed. The developed moisture loss index based on the field measurements would help the public agency to determine an optimum timing of an overlay placement without continually measuring moisture conditions in the field.

• Korean Journal of Environment and Ecology
• /
• v.23 no.1
• /
• pp.78-89
• /
• 2009

As 'design for all' and 'adaptable design', universal design is highly demanded to be adopted in neighborhood forest trail. The research areas were Mt. Doeum in Pohang, Gyeongsangbuk Province and Mt. Anma in Chuncheon, Gangwon Province which were equipped based on 7 principles of universal design. The purpose of this research is providing baseline data for effective formulation of forest trail using universal design through visitors' evaluation on forest trail facilities by importance-performance analysis. Visitor's evaluation was achieved through questionnaire survey, and total 247 pieces of subjects were used for the analysis, 114 pieces from Mt. Doeum in Pohang and 113 pieces from Mt. Anma in Chuncheon. The residential areas of the respondents were mainly near each mountain - Mt. Doeum and Mt. Anma. According to the responses, nature study and education were the biggest reasons for the respondents' visits to Mt. Doeum, and so was the health to Mt. Anma, which are representative types of visiting behavior to nearby forest trails. The mean of importance was shown to be 3.87 while that of performance was 4.04, being a little higher than importance's, in importance-performance analysis of Mt. Doeum. This result suggests that the responders placed positive value on the forest trail applying universal design. It is necessary to improve the safety and convenience of guidance-safety handrail, make information sign easy to understand, and introduce an interpretive sign meeting the visiting purposes of visitors. Also, the management to make the road surface flat is in demand for the accessibility to forest trail. The mean of importance was 3.92 and that of performance was 3.99 in Mt. Anma, which suggests the necessity of improvement in safety of pavement material and boundary safety facilities.

• Journal of the Korean Society for Railway
• /
• v.19 no.2
• /
• pp.224-233
• /
• 2016

Embedded Railway Systems (ERS) will be adapted for wireless trams and will be constructed along city roadways. An asphalt layer should be overlaid on top of the concrete slab used as the trackbed structure in order to ensure smoothness and surface levels equal to those of existing road pavement in downtown city areas. However, the characteristics of an asphalt layer when used as overlay pavement for an ERS are complicated and the behavior of this material is not yet well defined and understood. Therefore, in this study, laboratory shear and tensile bond strength tests were conducted to investigate the bonding behavior of an asphalt layer in a multilayered trackbed section of an ERS. For the laboratory tests, a waterproof coating material was selected as a bonding material between the asphalt overlay and a concrete specimen. Valuable design parameters could be obtained based on the tensile and shear bond strength test results, providing information about the serviceability and durability of the overlaid pavements to be constructed alongside the ERS for wireless trams. In addition, a deformation analysis to assess the tensile strain generated due to truck axle loads at the interface between the asphalt layer and the concrete slab was conducted to verify the stability and performance of the asphalt layer.