• International Journal of Highway Engineering
• /
• v.14 no.2
• /
• pp.55-61
• /
• 2012

Road signs are important facilities in terms of providing information to driver, they are helpful for driver's judgment as deliver it's own information. However if there is occurrence dew on the road sign because of the change of temperature and humidity, it can be cause of accidents. Therefore it is necessary to develop anti-dew or dew resistance technology. In this research the anti-dew technologies such as insulation road sign and anti-dew film were compared with normal road sign, and the effectiveness analysis was conducted for each alternatives. The quantity of dew on the road sign was check using ANOVA and Tukey HSD and the relation between the retro-reflectivity and quantity of dew on the sign was check using Pearson correlation coefficient. As a result, the sample of anti-dew film attached road sign showed lesser quantity of dew compared with normal road sign. After 90 seconds, the difference of dew quantity for anti-dew film and insulation road sign showed statistically significant result. The relation of between quantity of dew and retro-reflectivity was inverse correlation. As a result, when analyzed the quantity of dew and retro-reflectivity a point of view anti-dew effectiveness, the anti-dew film and insulation road sign showed meaningful result.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.5
• /
• pp.121-133
• /
• 2017

Since the mid 1990s, policies have been actively promoted to improve safety and pedestrian environment around the school such as the improvement of School zone. However, the prevention of accidents was not effective because it did not extend to the school road where the main transportation route for children's commuting takes place. In addition, due to the rapid increase of automobiles, trunk road traffic in the peak time bypasses the back roads, which threatens children's safety and the environment by invading the school area, which is the main living space of children. In this study, the characteristics of domestic children's traffic accidents were investigated and the problems were analyzed by conducting a field survey on Yeouido Secondary School in Seoul and Unjung Elementary School in Gyeonggi Province. In addition, Variable speed limit signs and Beacons were installed in the pedestrian road of comunity including School zone, and the effects of facilities on the speed of vehicles were analyzed. As a result of the analysis, the Variable speed limit sign showed a deceleration effect of about 8.3km/h, and the Beacon showed a phenomenon in which the traveling speed of 0.8km/h increased only slightly. In addition, the traffic violation rate of passenger cars, buses, and lorries decreased by about 3% as a result of investigating the number of traffic violation vehicles before and after installation.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.8 no.4
• /
• pp.143-154
• /
• 2005

This paper proposes the location acquisition methods and LBS(location-based services) system using RFID(radio frequency identification) tags with location information in ubiquitous city. Location information is checked using RFID tags attached to various buildings. stores and road signs. And various LBSs are provided based on the location information. Traditionally, when the location information is obtained by a GPS, the precision of the location information may deteriorate due to geographical displacement of a satellite and GPS receivers, for example shadow zone by building, in-door environment, and heavy cloud. The objective of this paper is to provide a ULID(universal location identification) data structure, a ULID-based location acquisition method and an LBS system, in which precise location information is extracted using RFID tags attached to various buildings, stores and road signs and ULID and also danger of information leakage is minimized so that an LBS of ubiquitous environment can be provided to a user.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.563-565
• /
• 2010

LED is low power and pro-environment semiconductor element. That can be used not only as the lighting function but also for Visible Light Communication(VLC). The VLC is the communication technology that can send data by blinking a fluorescent or LED using visible spectrum. That velocity of blinking can not be usually recognized by eyesight. Visible Light Communication using LED can be used in many fields. In the field of ITS(Intelligent Transportation System), Under construction on the road, Emitting traffic signs can be applied to transfer the vehicle information. In this paper, Emitting traffic signs in addition to the VLC give information about road condition, safety distance and the lane change. We design Communication protocol to provide safety service and verify protocol by experiment.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2013.05a
• /
• pp.835-838
• /
• 2013

국토해양부에서는 전국 도로표지의 효율적인 관리를 위해 국내 300여개 도로표지 관리기관에서 도로표지업무에 활용할 수 있도록 2001년 웹 기반의 도로표지전산관리시스템을 구축하였고, 2003년 도로표지종합관리센터를 설립하여 지속적으로 운영해오고 있다. 이는 네트워크 기반의 도로망도 상에서 전국 도로표지를 연계하여 관리할 수 있어 도로표지의 안내 연결성 확보 등 국내 도로표지 관리업무에 많은 부분 기여해 왔다. 최근 들어서는 모바일 환경이 구축되면서 인터넷이 연결된 사무공간 외에 현장에서도 시스템을 활용하고자 하는 요구가 증가하게 되었다. 따라서 도로표지종합관리센터에서는 도로표지전산관리시스템 이용자들의 편의를 증진하기 위하여 현장지원을 위한 도로표지 모바일 어플리케이션을 개발하였다. 모바일 어플리케이션은 스마트폰, 스마트패드 등 3G/4G/Wi-Fi 등 무선통신이 가능한 다양한 모바일 스마트 기기를 활용하여 도로표지전산관리시스템의 기능을 현장에서 활용할 수 있도록 하였으며, 현장이라는 공간 특성을 반영하여 쉽고 간단하게 기능을 구현하였다는 데 특징이 있다. 이를 통해 도로표지 담당자들은 언제 어디서든 도로표지 정보의 조회가 가능하고, 현장조사 시 표지 사진과 관련 정보를 수집하여 현장에서 즉시 도로표지전산관리시스템에 표지정보를 입력하거나 수정 할 수 있다. 현재는 모바일 어플리케이션 버전 1.0이 개발된 상태이며, 향후 다양하고 반복적인 사용자 활용 패턴을 면밀히 분석하여 보다 사용하기 쉽게 도로표지전산관리시스템 기능을 사무공간에서와 같이 모바일 어플리케이션도 사용할 수 있도록 지속적으로 개선해 나가고자 한다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.2
• /
• pp.18-35
• /
• 2020

Many human, roadway, and vehicle factors affect vehicle-pedestrian crashes. Especially, the roadway factors are easily defined and suitable for suggesting countermeasures. The characteristics of the road network are one of the roadway factors. The road network significantly influences behaviors and conflicts of drivers and pedestrians. A metropolitan city such as Seoul contains various types of road networks, and crash prevention strategy considering characteristics of the road network is required. In this study, we analyze the effects of road networks on vehicle-pedestrian crashes. In the study, high order road ratio, intersection ratio, high-low intersection ratio are considered as road network variables. Using Geographically Weighted Poisson Regression, crash frequencies in Dongs of Seoul are analyzed based on the road network variable as well as socioeconomic variables. As a result, Dongs are grouped by coefficient signs, and each group is suggested about improvement directions considering conflict situations.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.6
• /
• pp.899-915
• /
• 2018

In this study, in order to construct an eco-friendly advanced road transportation network, the multi-layer tunnel, which is a small-sized car road, is designed to have a height of less than 60 cm. However, the shape of the tunnel is low and the height of the traffic sign is small. In order to solve these problems, traffic sign characters were designed in three dimensions, and the possibility of applying the design of the three - dimensional sign that can obtain greater visibility than the existing signs at the same distance and the possibility verification through virtual simulation were performed. The three-dimensional sign is horizontally installed on the ceiling of the multi-layer tunnel. To be seen vertically, it is enlarged by a certain ratio by the perspective, and the width and height are enlarged. Respectively. In addition, 3D simulation was performed to verify the visibility of the stereoscopic signs when the driver ran through the stereoscopic sign design specifications. As a result of the design and experimental study, it was confirmed that the stereoscopic sign could be designed through the theoretical formula and that it could provide the driver with a larger traffic sign character because there is no limitation of the facility limit compared to the existing vertical traffic sign. Also, we confirmed that it can be implemented in the side wall by using the stereoscopic sign design principle installed on the ceiling part. It was confirmed that the design of the stereoscopic sign can be designed to be smaller as the distance that the driver visually recognizes the sperm is shorter, the height of the protrusion vertically at the lower part of the stereoscopic sign becomes higher. As a result of 3D simulation running experiment based on the design information of the stereoscopic sign, it was confirmed that the stereoscopic sign is visually the same as the vertical sign at the planned distance. Although the detailed research and institutional improvement of stereoscopic signs have not been made in Korea and abroad, it is evolved into a core technology of new road traffic facilities through various studies through the possibility of designing and applying stereoscopic signs developed through this study Expect.

• Journal of the Korean Institute of Rural Architecture
• /
• v.18 no.3
• /
• pp.25-34
• /
• 2016

The purpose of this study is to investigate installation status of information facilities and condition of walking road influencing to psychological safety of walking tourists. For this purpose, four roads for walking tour are selected; the course no. 16 of Jeju Olle Trail, Sarabong Byeoldobong walkway in Jeju and the course no. 8 of Bougil, Gyeongpo Lake walkway in Gangneung. Facilities installed on roads for walking tour are classified into four facilities; safety facility, information facility, amenity facility, local cultural facility. In order to consider installation status of information facilities and condition of walking road influencing to psychological safety of walking tourist, a field experiment was conduced focusing on the course no. 16 of Jeju Olle Trail. Thirteen cases were happened as confusing situation while walking tour. Of the 13 cases, the situation of being lost and wandering on the trail accounted for six cases. In contrast to the expectation that the situation of being lost and wandering would occur only at a crossroads, it is not that such situation took place at specific places like a crossroads or where direction signs were inaccurate. Walking tourists of this field experiment also confronted situations of having lost confidence about continuing the ongoing direction, of having anxiety over walking a walking trail, of feeling discomfort caused by walking and of being offended by uncomfortable or messy areas of walking trial. These confusing situations are happened inappropriate installation of direction sign, so direction sign is needed to install more carefully and detailed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.385-392
• /
• 2013

A key element of the fog warning system to prevent large traffic accidents is a visibility measurement device. Recently, the need for it that is similar to the human visual sense and cheap and accurate than expensive fog sensors is increasing. In this paper, we present the performance evaluation and the economic analysis of the Road Visibility Measurement System (RVMS), which is developed for measuring the road visibility through a CCTV camera. For experiments, we have installed a CCTV camera, a fog sensor, and visibility signs at the Yeo-ju Test Road on the Central Inland Expressway. We evaluated the measurements from RVMS and the fog sensor based on observations. The result shows RVMS outperforms the fog sensor with respect to measurement stability and correctness. We also show RVMS has higher economic feasibility and various applications. RVMS can prevent the traffic accidents caused by severe fog and enhance the process of the wide-area visibility information system significantly.

• Journal of Auto-vehicle Safety Association
• /
• v.15 no.2
• /
• pp.42-48
• /
• 2023

In recent years, automated vehicles have garnered attention in the multidisciplinary research field, promising increased safety on the road and new opportunities for passengers. High-Definition (HD) maps have been in development for many years as they offer roadmaps with inch-perfect accuracy and high environmental fidelity, containing precise information about pedestrian crossings, traffic lights/signs, barriers, and more. Demonstrating autonomous driving requires verification of driving on actual roads, but this can be challenging, time-consuming, and costly. To overcome these obstacles, creating HD maps of real roads in a simulation and conducting virtual driving has become an alternative solution. However, existing HD maps using high-precision data are expensive and time-consuming to build, which limits their verification in various environments and on different roads. Thus, it is challenging to demonstrate autonomous driving on anything other than extremely limited roads and environments. In this paper, we propose a new and simple method for implementing HD maps that are more accessible for autonomous driving demonstrations. Our HD map combines the CARLA simulator and OpenStreetMap (OSM) data, which are both open-source, allowing for the creation of HD maps containing high-accuracy road information globally with minimal dependence. Our results show that our easily accessible HD map has an accuracy of 98.28% for longitudinal length on straight roads and 98.42% on curved roads. Moreover, the accuracy for the lateral direction for the road width represented 100% compared to the manual method reflected with the exact road data. The proposed method can contribute to the advancement of autonomous driving and enable its demonstration in diverse environments and on various roads.