• 한국산림과학회지
• /
• 제106권3호
• /
• pp.300-309
• /
• 2017

본 연구는 우리나라에 도입된 오스트리아 Koller사의 K301-4와 우리나라에서 개발된 HAM300 타워야더의 전간집재작업에 대해서 작업시간을 측정하고, 작업생산성, 작업비용, 최적노망밀도에 대한 분석을 실시하였다. 최대집재거리가 길어질수록 생산성은 감소되지만 K301-4와 HAM300을 비교하였을 때, 최대집재거리가 34 m 보다 길어질수록 K301-4의 생산성이 높았으며, 1회당 집재재적이 커질수록 양측의 차이는 커지는 것을 확인하였다. K301-4는 HAM300에 비해서 기계가격이 높고, 타워야더의 설치 및 철거 소요시간이 더 커지므로 HAM300이 작업비용 측면에서 효율적으로 나타났다. 타워야더를 도입하여 작업비용을 절감하기 위해서는 장기간에 걸쳐 임내노망을 반복적으로 사용하고 1회당 집재재적을 늘리는 것이 유리하다고 판단된다.

• 한국정밀공학회지
• /
• 제24권1호
• /
• pp.37-46
• /
• 2007

The vibration environment essentially companied by vehicle operation on the ground is determined by the shape of road surface, which is called profile. This paper focuses on development of a profile and severity measurement system for unpaved test courses. In general, the profile and severity of unpaved road is an important issue in the reliability of endurance test. In order to measure unpaved road profile and severity, it is necessary to develop a profilometer system. The developed profilometer system is composed of data processing computer, power unit, air compressor and sensors(encoder, vertical gyro and laser displacement) This paper presents the measuring system configuration, measurement principle of road profile and analysis method of road characteristics used at CPG(Changwon Proving Ground) for this purpose.

• 소음진동
• /
• 제6권2호
• /
• pp.253-259
• /
• 1996

Neighboring buildings which are sufficiently close to both sides of an urban street reflect sound back to the road and sound energy is increased by thses reflectors. Therefore, this study is forcussed on the prediction modeling for road traffic noise under reflective conditions. A part of a block in urban road is regared as a box. The sound energy density in the box is employed to establish prediction formulas in terms of independent variables. The variables. The validity of the proposed prediction method has been experimentally confirmed by applying it to actually measured road traffic noise data. On the whole, the agreement between measured and predicted noise levels appeared to be satisfactory.

• 한국산림과학회지
• /
• 제94권2호통권159호
• /
• pp.108-111
• /
• 2005

This study was conducted to identify the road effect on small rodent populations within fragmented forest areas around the road from June to September 2002, in 9 study sites of Baekdugdaegan mountains, Korea. Two species of small rodents, Korean field mouse Apodemus peninsulae and striped field mouse Apodemus agrarius, were captured in this study. Korean field mouse preferred forest area, and striped field mouse generally has been found edge area around road. Mean body weight of Korean field mouse was significantly different, but that of striped field mouse was not between both distance from road. Korean field mouse is forest-dwelling species and their distribution is limited in forest area. In contrast, striped field mouse has wide distributional range around road. The effects of road is different in each small rodent species and their habitat preferences.

• 한국도로학회:학술대회논문집
• /
• 한국도로학회 2001년도 학술발표회 논문집
• /
• pp.115-122
• /
• 2001

• Steel and Composite Structures
• /
• 제21권5호
• /
• pp.1145-1156
• /
• 2016

To study the effects of foam core density and face-sheet thickness on the mechanical properties and failure modes of aluminum foam sandwich (AFS) beam, especially when the aluminum foam core is made in aluminum alloy and the face sheet thickness is less than 1.5 mm, three-point bending tests were investigated experimentally by using WDW-50E electronic universal tensile testing machine. Load-displacement curves were recorded to understand the mechanical response and photographs were taken to capture the deformation process of the composite structures. Results demonstrated that when foam core was combined with face-sheet thickness of 0.8 mm, its carrying capacity improved with the increase of core density. But when the thickness of face-sheet increased from 0.8 mm to 1.2 mm, result was opposite. For AFS with the same core density, their carrying capacity increased with the face-sheet thickness, but failure modes of thin face-sheet AFS were completely different from the thick face-sheet AFS. There were three failure modes in the present research: yield damage of both core and bottom face-sheet (Failure mode I), yield damage of foam core (Failure mode II), debonding between the adhesive interface (Failure mode III).

• 농촌계획
• /
• 제11권1호
• /
• pp.1-8
• /
• 2005

The purpose of this study is to develop a simulation model of rural road path for infrastructure of green-tourism and public service in rural areas. This study makes an objective function for moving cost minimization considering car travel time according to road characteristics, which can route the optimal shortest road paths between the center places and all rear villages, based on GIS coverages of road-village network for connecting between center places and rural villages as input data of the model. In order to verify the model algorithm, a homogeneous hexagonal network, assuming distribution of villages with same population density and equal distance between neighborhood villages on a level plane area, was tested to simulate the optimal paths between the selected center nodes and the other rear nodes, so that the test showed reasonable shortest paths and road intensity defined in this study. The model was also applied to the actual rural area, Ucheon-myun, which is located on Hoengsung-gun, Kangwon-do, with 72 rural villages, a center village (Uhang, 1st center place) in the area, a county conte. (Hoengsung-eup, 2nd center place), and a city (Wonju, 3rd center place), as upper settlement system. The three kinds of conte. place, Uhang, Hoengsung-eup, and Wonju, were considered as center places of three scenarios to simulate the optimal shortest paths between the centers and rural villages, respectively. The simulation results on the road-village network with road information about pavement and width of road show that several spans having high intensity of road are more important that the others, while some road spans have low intensity of road.

• 한국입자에어로졸학회지
• /
• 제8권2호
• /
• pp.47-54
• /
• 2012

Paved road dust emissions were investigated 14 times on 12 main roads in Seo-Cho Gu, Seoul, Korea by vehicle-based mobile sampling system(Road Dust Monitoring System) during September to December 2011. Also, fourteen heavy metals present in the dust samples were analyzed by ICP. ICP analysis showed that one of major source of the road dust would be urban construction. A large amount of silt was found, which might be originated mainly from building construction and open beds of trees. Trace element and pollution indices of heavy metals(Cd, Cu, Ni, Pb, Zn) on the roads adjacent to the commercial area had higher concentrations than those on the roads adjacent to the construction and residential areas because of traffic density and heavy traffic.

• 융합신호처리학회논문지
• /
• 제2권2호
• /
• pp.7-12
• /
• 2001

본 논문에서는 스페클 노이즈를 포함하는 SAR 영상에서 도로망과 같은 선형 구조를 검출하기 위하여 하이브리드 특징 검출 방법을 사용하였다. 먼저 국소적으로 이웃한 영역에 대하여 평균 밝기 비율 또는 통계적 특성을 고려하여 국소적 에지를 검출하였고, 도로에 대한 많은 정보를 위하여 양 검출기로부터 검출된 응답을 결합하였으며, 결합된 에지 세그먼트 중 도로에 일치하는 세그먼트를 결정하고, 연결하여 완전한 도로망을 검출하였다. 본 논문에서 도로망의 검출 방법으로 도로에 대한 일반적인 사전 지식을 MRF 모델로 정의하고, 제안한 세그먼트의 상호 작용 포인터 프로세서에 의한 에너지 함수를 최적화하여 도로망을 검출하였다.

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• 제2권4호
• /
• pp.274-278
• /
• 2021

Road structures play an important role in collisions involving vehicles and wildlife. Our study aimed to determine the effect of various types of road structures on the risk associated with roadkill. We surveyed 50 previously identified roadkill hotspots, ranked from one to five according to roadkill density. We collected nine types of road structure data on each hotspot road section. Structures with similar characteristics were grouped together, resulting in five categories, namely, median barrier, high edge barrier, low edge barrier, speed, and visibility. We examined the existence of each road structure category at each hotspot rank. The cumulative link model showed that the absence of bottom blocked median barrier increased the roadkill hotspot rank. Our study concluded that a visual obstacle in the middle of roads by the median barrier decreases wildlife road crossing attempts and roadkill risk. We suggest that future roadkill mitigation plans should be established considering these characteristics.