• International Journal of Highway Engineering
• /
• v.19 no.2
• /
• pp.45-53
• /
• 2017

PURPOSES: The objectives of this study are to develop a new cold-applied crack sealant and to evaluate its properties and field applicability by comparing with other conventionally used crack sealants. METHODS : A new cold-applied crack sealant was developed by using neoprene latex to improve material properties. The fundamental properties such as viscosity, residue %, penetration, and softening point of the developed crack sealant were tested by TxDOT criteria to evaluate crack sealing capability. Moreover, the performance of the developed cold-applied crack sealant was evaluated under both laboratory and field conditions. In the laboratory, the bond property was evaluated using the developed cold-applied crack sealant and conventional hot-applied crack sealant by the bond-properties test standardized under ASTM D 6690. In the field, test sections were constructed on three areas: a trunk road, bus-only lane, and motorway, with the developed crack sealant and three conventional crack sealants. After construction, early field-inspection was performed on the test sections. RESULTS AND CONCLUSIONS : Overall, the developed cold-applied crack sealant demonstrates reasonable storage stability, durability, and bond property compared to conventional hot-applied crack sealants. From the test sections, it was established that the developed cold-applied crack sealant does not pose construction issues. Moreover, the early performance was verified through field inspection. However, as the field inspection was conducted a week after the construction, it is necessary to conduct an inspection of performance from a long-term point of view.

• Korean Journal of Construction Engineering and Management
• /
• v.8 no.3
• /
• pp.106-115
• /
• 2007

The size and length of road tunnels have been gradually expanded as industry developed. Consequently, the risk has been increased. The decision making process for ventilation system for road tunnels involves a large amount of information on economic feasibility, construction methods, and safety etc. In situation where systematically structured decision making process is unavailable, almost decisions about ventilation systems are made based on engineers' private knowledge and experiences. Procedure and criteria to choose the best optimized ventilation system among many alternatives are proposed, breaking away from the economic dependency-oriented decision making. This paper presents a Multi-Attribute Utility Theory and AHP based function with which planners can calculate overall utility of each alternative. It is anticipated that the effective use of the proposed methodology for decision making on ventilation systems ould be able to reduce the likelihood of the occurrence of potential safety risks as well as increase the overall ventilation performance.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.3
• /
• pp.223-231
• /
• 2009

This study intends to develop a GIS-based environmental assesment technique for environmental friendly road route plan using a spatial analysis function. After embodying an impact range based on the analysis of factors which cause the environmental damage by the road construction, a literature survey on a diverse grading cases and legal regulations was conducted. As a quantitative model for the spatial analysis, AHP was selected. As the environmental assessment, 8 items such as topography & geology, animals & plants, soil ecology, water quality, air quality, noise, land use, and landscape were selected. and then finally classified into three-grades using a pairwise comparison of the alate collected by a questionnaire surveying, weighting values were applied to there 8 items. The highest weight value, the grade 1 among eight was 0.191 for animals & plants. As the result of verifying the above method for the case region, the most environment-friendly road route could be generated.

• Environmental Engineering Research
• /
• v.17 no.1
• /
• pp.27-34
• /
• 2012

This paper deals with the evaluation of environmental impact of rail and road transport in South Korea. A framework of energy input-output analysis is employed to estimate the total energy consumption and $CO_2$ emission in acquiring and using a life cycle of passenger and freight transport activity. The reliability of $CO_2$ emission based on uncertainty values is assessed by means of a Monte Carlo simulation. The results show that on a passenger-kilometers basis, passenger roads have life cycle emissions about 1.5 times those of rail, while that ratio is ten times greater when the scope of evaluation regards the tailpipe. In the case of freight transport, on a million ton-kilometers basis, the value for road mode is estimated to be about three times compared to those of rail mode. The results also show that the main contribution of $CO_2$ emission for road transport is the operation stage, accounting for 70%; however, the main contribution for rail transport is the construction and supply chain stage, accounting for over 50% emission.

• Proceedings of the SAREK Conference
• /
• 2008.11a
• /
• pp.67-70
• /
• 2008

As a part of the project on road tunnel fire safety system development, Quantitative Risk Assessment program was developed. In this study, We carried out Quantitative Risk Assessment with this program by using a factor of cross passage interval, warning announcement time and congestion ratio etc for 1km tunnel with natural ventilation. In the case of 250m below of cross passage interval, Risk value due to warning announcement time was a slightly changed. but if cross passage interval is more than 250m, expected fatalities in the same HRR(heat release rate) was sharp increased. As a result, Quantitative Risk Assessment program which was developed in this research project is possible to risk assessment with ventilation type, cross passage for evacuation and detection system response property etc. hereafter, this program look forward to use as a tool for road tunnel performance based design.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.57-65
• /
• 2011

In this study, estimated the minimum lane width for the curved section by analyzing of lateral sway distance and compared the lane width for result of this study and a precedent study for straight section on urban roads. Then suggested minimum lane width of road alignments and vehicle classes. The lane width of curved section that was investigated was 2.79m~3.40m. Analysis of frequency distribute and cumulative frequency distribution for lateral sway distance on the basis of 85% of the suggested vehicles. The result of study, minimum lane width for the curved section was 2.31m~2.58m in the case of small size car and 2.80m~3.27m in the case of large size car. Result of this study is judged that it is necessary to case for introduction of green transit, during road construction and construct a road for small size car. Expect result of this study can be used for the application of flexible design standard according the purpose of road designer.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.171-184
• /
• 2007

Chemical admixture stabilization has been extensively used in both shallow and deep stabilization in order to improve inherent properties of the soil such as strength and deformation behavior. An increment in strength, a reduction in compressibility, an improvement of the swelling or squeezing characteristics and increasing the durability of soil are the main aims of the admixtures for soil stabilization. Recently, the various advanced cement stabilizer mixing technique was developed. Advanced cement stabilizer mixing technique is environmentally-friendly and has an excellent mixing property and outstanding mixing speed. In this study, to develop the rural road pavement technology using cement stabilizer, compaction and unconfined compression test were performed with various mixing ratio and two types of soil(clay and silty soil). And the freezing/thaw test and bending strength test performed to develop suitable cement stabilizer material for stabilization of rural road. Based on the test results, the liquid types of cement stabilizer material and silty soil mixture are most suitable for rural road construction and although the mixing ratio is low, cement stabilizer mixture is effective for durability of rural road surface layer.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.1
• /
• pp.86-92
• /
• 2010

The fuel is not injected when the driver doesn't push acceleration pedal of a vehicle with engine speed higher than about 1,500rpm above mid vehicle speed range. This is called "fuel-cut function" and almost every modern vehicle is equipped with this function. This is activated on downhill part of a highway most often. Therefore the vehicle-exhausted $CO_2$ can be zero in this downhill part if the driver could recognize this part of highway. We compared the vehicle-exhausted $CO_2$ emission when using fuel-cut function with the $CO_2$ mass when without using this function in this study. We found that the $CO_2$ emission reduced with fuel-cut function and measured the reduction rate of vehicle-exhausted $CO_2$ mass with this test results. The exhausted $CO_2$ mass of a passenger car(2,000cc engine volume) is reduced by 4% with this function used. This $CO_2$ reduction effect can be achieved if the downhill part of a highway is painted with a specific color. And this road painting can be included in the highway road rehabilitation policy.

• Journal of the Korean Institute of Rural Architecture
• /
• v.17 no.2
• /
• pp.51-58
• /
• 2015

10 years ago, in Sijeon-ri, Dogo-myeon, Asan-si, the existing stream was repaired to develope Mt. Dogo trail and irrigation systems through road expansion pavement construction and small stream repair construction. The trees such as persimmon and willow are eliminated that rowed on both sides of the stream and dredging work to dig the rock and sand have been performed. As a result, wide asphalt road was built, also flood damage worries were reduced. 10 years passed and now, how did local residents think about the stream repaired before and after? Village residents, public officials, and the stream construction engineer were interviewed. Villagers indicated a problems that brook became a place where water peppers were taking over and water was stagnating due to the slow velocity so nothing could live and natural landscape like a wash place and the cascade disappeared, because rock and sand were taken out brought soil into the brook. Public officials and engineers were aware of the problems at the time of the stream. Now that construction is completed after 10 years, Both realistically and budgetary to restoration would be difficult. However, it is necessary to seek for waterfront space which can be restored or replaced by a part of the stream like similarly before. In addition, it is necessary to restore to the progression of a natural stream which connect with stairs(or slope) - small waterfalls - pools - wash place. In this paper, we hope to take a lesson from the Sijeon-ri model and make rural stream construction be prepared with consideration about not only distinct characteristics of specific area but also the opinion of local resident.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.7 no.6
• /
• pp.141-148
• /
• 1998

A loader is construction & road or agricultural machinery for lifting, moving, and mixing. This study deals with the agricultural mini loader for stock raising farming. The performance of the machine is established by pulling power, working lifting capacity, and minimum circling radius, etc. Also, driving easiness and endurance are very important in manufacturing. Thus, this study has developed the loader with the 4-wheel driving equipment by gear transmission, the 4-wheel steering equipment by power handle steering type, and the equipment making four wheels touch simultaneously on the rugged ground. The developed loader having these functions was very fit in a small cattle shed or a rugged ground. This study is divided into two parts; (I) development of 4WS transmission and (II) construction of the loader by 4WS system and other equipments.