• International Journal of Highway Engineering
• /
• v.10 no.3
• /
• pp.87-96
• /
• 2008

Wandering, variation of wheel tracks, has not been considered as an important factor for pavement designs and maintenance due to measuring difficulties. In order to investigate vehicle lateral displacements on roadways, this study measured wheel tracks on two-lane and four-lane National highways with lane widths 3.25m and 3.5m. The results showed that the tracks of left and right wheels were distributed into different forms, and those of left wheels were more concentrated. In the mean of the left distributions, 59.5cm and 80.7cm were obtained on lane widths 3.25m and 3.5m respectively by cars, and 58.4cm and 73.6cm were obtained by trucks. These mean differences seem to be generated from those between the lane widths. It is recommended to apply the distribution of left wheel tracks for pavement designs.

• International Journal of Highway Engineering
• /
• v.10 no.4
• /
• pp.127-138
• /
• 2008

Vehicles have recently become one of the main factors affecting our quality of life, and the needs of vehicles are still increasing. As a result, the growth of vehicles generate more crashes every year. One main factor for vehicle crashes is uncareful driving behaviors. Especially, drowsy or fatigue driving behaviors explain about 10-20% of the crashes, and they cause serious results because of the delay of response time and the decrease of object-recognition. Therefore, this research conducted real time image processing tests in order to study how cellular phone usages and drowy(or fatigue) drives affect driving behaviors. A vehicle simulator was used for this research, and the faceLAB 4.5 of Seeing Machines for eye image tracking tests using a small camera was installed in the front of the simulator, and normal and drowsy(or fatigue) driving patterns were analyzed.

• International Journal of Highway Engineering
• /
• v.15 no.4
• /
• pp.127-133
• /
• 2013

PURPOSES : The impact performance of flexible barrier system such as structural response, vehicular motion and occupant safety vary depending on the impact point. Thus, to properly evaluate the performance of a flexible barrier system, impact should be made to a point which will lead to the worst possible results. This point is called the Critical Impact Point (CIP). This paper presents the way to determine the CIP for a SB2 class flexible barrier system which is consisted of Thrie-Beam rail and circular hollow tube post of 2m span. METHODS: Barrier VII simulations were made for impact points; Case 1 at a post, Case 2 at 1/3 span downstream from a post, Case 3 at middle of the span, Case 4 at 2/3 span downstream from a post. For the structural performance (deflections), impact simulation of 8000kg-65km/h-15degree was used, and for vehicle motion and occupant safety, simulation of 1300kg-80km/h-20degree impact was made and analysed. RESULTS: Case 1 gave the largest dynamic deflection of 75.72cm and also gave the largest snag value of 44.3cm. Occupant safety and exit angle of the vehicle after the impact were not sensitive to the impact point and were all below the allowable limit. CONCLUSIONS : For the SB2 class flexible barrier system's CIP can be regarded as a post which is sufficiently away from the end of Length of Need in order to avoid the end-effect of the barrier system. It can be more economic in the long run because the normal concrete pavement material is likely to cost more due to higher probability of maintenance and repair and higher social cost due to traffic accident, etc.

• Journal of Korean Society of Transportation
• /
• v.29 no.1
• /
• pp.95-102
• /
• 2011

This paper presents a Driving Risk Model (DRM) based on driving speed choices using an Ordered Response Probit (ORP) model. The DRM is conceptualized based on the relation between speed deviation and the occurrence of crashes found by Solomon. The impacts of various driving risk factors are revealed by applying the DRM to evaluate the effectiveness of In-Vehicle Traffic Warning Information (IVTWI) in expressway driving. Regarding driving risk, the results show that: (1) the risk is lower among male drivers, those with more driving experience and those with less accident history, (2) the risk is higher when driving takes place on wet road surface, in the afternoon, and under conditions of low traffic volume, and (3) the risk is also higher on both downgraded and long curve sections. Additionally, the results provide evidence that provision of IVTWI can decrease the driving risk. The proposed DRM provides a solution for assessing the traffic safety impacts of countermeasures on roadways when there is a shortage of traffic accidents data.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.6
• /
• pp.627-634
• /
• 2016

In this paper, an augmented video generation method to evaluate the performance of lane departure warning system is proposed. In our system, the input is a video which have road scene with general clean lane, and the content of output video is the same but the lane is synthesized with contamination image. In order to synthesize the contamination lane image, two approaches were used. One is example-based image synthesis, and the other is background-based image synthesis. Example-based image synthesis is generated in the assumption of the situation that contamination is applied to the lane, and background-based image synthesis is for the situation that the lane is erased due to aging. In this paper, a new contamination pattern generation method using Gaussian function is also proposed in order to produce contamination with various shape and size. The contamination lane video can be generated by shifting synthesized image as lane movement amount obtained empirically. Our experiment showed that the similarity between the generated contamination lane image and real lane image is over 90 %. Futhermore, we can verify the reliability of the video generated from the proposed method through the analysis of the change of lane recognition rate. In other words, the recognition rate based on the video generated from the proposed method is very similar to that of the real contamination lane video.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.4
• /
• pp.410-419
• /
• 2015

In this study, the roadability, fuel economy and emission characteristics were evaluated for a natural gas converted vehicle. The results are as follows; Not only the shortage of power was observed in stall test, but also large deterioration of acceleration performance was exposed in roadability. Compared to the original LPG system, the acceleration is 76% in start acceleration and 45 ~ 65% in overtaking acceleration, especially the decline became larger when air conditioner is at work. Furthermore, because the mapping data, which controls the injection depending on driving condition, do not match up with injection system, the failure of air-fuel ratio feedback control occurs resulting from the large gap between the required and the really supplied amount of fuel. This failure cause the exhaust gas to emit without catalytic conversion and the fuel economy based on the fuel heat value to get worse 22% in the mode test and 16% in road test respectively. In addition, the existing injection system does not secure enough fuel at the starting so that it may lead to the fail of clod start, the deterioration of hot start and inharmonic of engine at the idle after start.

• Spatial Information Research
• /
• v.16 no.1
• /
• pp.65-77
• /
• 2008

There have been many studies and technologies that define a current location of a moving vehicle with GPS(Global Positioning System). However, the navigation system with GPS has troubles to search an optimized route considering data such as realtime parking status and road conditions. Moreover, the GPS systems show malfunction in the downtown with very tall buildings, underground parking lot and the inside of buildings. On the contrary, the RFID systems are able to reflect real-time status of parking lots and roads in the downtown. This paper proposes a system of guiding path for parking lots to consider real-time constraints based on RFID. The results obtained from the implemented system show smooth guiding of a new route after immediately sensoring the change of the information of parking lots and roads: if a parking lot that a vehicle is heading to is fully occupied, the system re-searches a new route for a neighbor parking lot and immediately transfers it to customer's mobile, and if the designated route is under construction, the system guides a detour path. The proposed method will be useful for advanced integrated parking control system.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.6
• /
• pp.291-296
• /
• 2015

The tire damage classification method is researched on the periodicity detection of ramdomness ultrasonic signals to occur at the driving vehicle tire. Setting method of adaptive threshold is proposed in order to valid pulse detection by tire damage in ultrasonic noise on the road and used low pass filter for decrease signal ramdomness as preprocessing. Time interval of detected pulse is setted the density function depend on the vehicle's speed and the method of tire damage detection is proposed that measuring the first peak's time of time density function.The result of time density function in case of one damage material, the first peak's time is measured within the error limit of tire's rotation period, 169.8ms and 97.9ms and 81.8ms, about the speed of 50km/h and 80km/h and 100km/h. In case of more than one damage material, the sum of each peak's time is measured within the error limit of tire's rotation period about the speed.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.6
• /
• pp.621-628
• /
• 2015

This paper describes an algorithm for detecting vehicles detection in real time. The proposed algorithm has the technique based on computer vision and image processing. In real, complex environment such as one with road traffic, many algorithms have great difficulty such as low detection rate and increasing computational time due to complex backgrounds and rapid changes. To overcome this problem in this paper, the proposed algorithm consists of the following methods. First, to effectively separate the candidate regions, we use vertical and horizontal edge information, and shadow values from input image sequences. Second, we extracts features by using HOG from the selected candidate regions. Finally, this paper uses the OS fuzzy-ELM based on SLFN to classify the extracted features. The experimental results show that the proposed method perform well for detecting vehicles and improves the accuracy and the computational time of detecting.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.8
• /
• pp.1547-1552
• /
• 2017

Unlike diesel locomotives, electric vehicles have various issues because they have very quiet engine sound. For example, pedestrians are exposed to the dangerous electric vehicles on the road because they can not recognize the electric vehicles' sound. Moreover, the driver is unable to recognize how fast driver's car is driving at a certain speed. To solve these problems, electric cars' sound needs to be artificially implemented and played. This paper examines the problems of the previous sampling engine sound approach. In this paper, instead of using sampling sounds, we developed a novel synthesizer algorithm via programming languages as a software. In experimental results, we demonstrated and verified our proposed synthesizer's approach is superior to the previous sampling approach. In addition, through these synthesizer's approach, we highly expect the proposed synthesizer's approach will give safety, convenience and comfort to the electric vehicles' users.