• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.1
• /
• pp.45-52
• /
• 2016

One commercial package for magnetic analysis was used to apply repulsive forces of permanent magnetics to bicycle cushion system. Reliabilities of finite element analysis were acquired by comparing with those of experimental measurements. Equivalent spring stiffnesses corresponding to various sizes of magnetics were implemented into the bicycle dynamic model with three degree of freedom. Input force caused at front and rear wheels due to road unevenness was considered in the dynamic model. Dynamic behaviors were observed in terms of vertical displacements of the rider and the front reach as well as pitching displacement of the mass center when the bicycle ran over half-triangular bump. The methodology suggested in this paper by the finite element analysis and numerical model will be an useful tool for more accurate prediction of cushion design for any vehicle system if magnetic forces are utilized.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.1
• /
• pp.94-102
• /
• 2012

Recently entered into an aging socity as the number of elderly drivers is increasing. Traffic accidents of elderly drivers are caused by driver inattentions such as poor vehicle control due to aging, visual information retrieval problems caused by presbyopia, and objects identifying problems caused by low contrast sensitivity. In this paper, detection method of ROIs on the road is proposed. The proposed method creates the saliency map to detect the candidate ROIs from the input image. And, the input image is segmented to obtain the ROIs boundary. Finally, selective visual attention regions are detected according to the presence or absence of a segmented region with saliency pixels. Experimental results from a variety of outdoor environmental conditions, the proposed method presented a fast object detection and a high detection rate.

• Korean Journal of Environment and Ecology
• /
• v.16 no.4
• /
• pp.409-420
• /
• 2003

The avifauna of from Manbokdae to Siribong in Jiri Mountain part of Baekdudaegan, was surveyed from May to November, 2002. In total, we observed 901 birds, and they were consisted of 49 species,23 families and 7 orders. The largest number of birds were observed in valley and followed by in low ridge, Road, Agricultural area and high ridge. The dominant species were Great Tit (Parus major) and then Brambling (Fringilla montifringilla), Tree Sparrow (Passer montanus), Black-billed Magpie (Pica pica) and Long-tailed Tit (Aegithalos caudatus). The highest species diversity index was 2.85 at low ridge(846m), and the lowest was 1.83 at high ridge(1,433m). In this study, the valley is the most important area for the habitat of birds and followed by the low ridge and agricultural area. Thus, to decide the management required area of Baekdudaegan, it should include valley and nearby lowland as well as ridge area. Moreover, there should be some sort of restriction of vehicle usage when a road cross or close to the Baekdudaegan.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.6
• /
• pp.15-24
• /
• 2011

As increase awareness of intelligent vehicle systems, many kinds of lane detection algorithm have been proposed. General boundary extraction method can bring good result in detection of lane on the road. But a shadow on the road, or other boundaries, such as horizontal lines can be detected. The method using morphological operations was used to extract information about Lane. By applying HSV color model for color information of lane, the candidate of the lane can be extracted. In this paper, the lane detection region was set by Hough transformation using the candidate of the lane. By extracting lane markings on the lane detection region, lane detection method can bring good result.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.2
• /
• pp.36-47
• /
• 2020

The objective of this study is to analyze the effect of the shoulder-use lane, which is a representative traffic management technique that increases the road capacity. The operation of the shoulder-use lane has been actively used as a countermeasure to improve traffic congestion, because it has the effect of improving traffic flow during rush hour. In Korea, the shoulder-use lanes are available at Gyeongbu, Yeongdong, and on the Seoul Outer Ring expressway, and their use is gradually increasing. Therefore, a comprehensive analysis was conducted to analyze the effects of the shoulder-use lane; including 1) analysis of individual shoulder lanes based on a time space diagram, and 2) analysis of shoulder lanes by road axis. These findings can contribute to the efficient installation and operation of shoulder-use lanes on expressways.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.5
• /
• pp.494-502
• /
• 2011

Bimodal tram is designed to run on a dedicated path in automatic mode using a magnetic track system in order to realize a combination of the accessibility of a bus and the constant regularity of a railroad. This paper presents design and test results of the series hybrid propulsion system of the bimodal tram on both test track and public road, which uses CNG (Compressed Natural Gas) engine and Lithium polymer battery pack. This paper describes the real-time data measuring equipment for the series hybrid propulsion system of the bimodal tram. Using this measurement equipment, the performance of the prototype vehicle's driving on test track and public road was verified and the fuel consumption and the efficiency of CNG engine have been investigated.

• International Journal of Highway Engineering
• /
• v.9 no.3
• /
• pp.91-100
• /
• 2007

The most important thing for driver's safety on the road is equipment of crash cushion as a vehicle protection safety facility. But development of crash cushion is defective because there's no rational and reality way of design. And also without an alternative plan, it rely on crash test hereby it suffers a great economic loss and wastes time. This study that uses data of cash test proves the suitability of single degree of freedom which considers the safety of passengers about three-dimensional complicated Crash Analysis. As the study analyzes the conduct of crash cushion, it want to develop the effective method of design on Single Degree of Freedom Crash Cushion. And it presents the way of crash cushion design through making a crash analysis model with single degree of freedom. To verify the validness of the crash cushion plan, with single degree of freedom plan, we make the level CC2 crash cushion and execute the crash test. A performance test brings satisfied result and a plan of single degree of freedom crash cushion is proven as an one of the way to be a good system which can design crash cushion.

• Korean Journal of Remote Sensing
• /
• v.37 no.5_1
• /
• pp.1163-1175
• /
• 2021

In autonomous driving, road markings are an essential element for object tracking, path planning and they are able to provide important information for localization. This paper presents an approach to update and measure road surface markers with HD maps as well as matching using inverse perspective mapping. The IPM removes perspective effects from the vehicle's front camera image and remaps them to the 2D domain to create a bird-view region to fit with HD map regions. In addition, letters and arrows such as stop lines, crosswalks, dotted lines, and straight lines are recognized and compared to objects on the HD map to determine whether they are updated. The localization of a newly installed object can be obtained by referring to the measurement value of the surrounding object on the HD map. Therefore, we are able to obtain high accuracy update results with very low computational costs and low-cost cameras and GNSS/INS sensors alone.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.5
• /
• pp.115-124
• /
• 2008

In vehicular networks, vehicles should be able to authenticate each other to securely communicate with network-based infrastructure, and their locations and identifiers should not be exposed from the communication messages. however, when an accident occurs, the investigating authorities have to trace down its origin. As vehicles communicate not only with RSUs(Road Side Units) but also with other vehicles, it is important to minimize the number of communication flows among the vehicles while the communication satisfies the several security properties such as anonymity, authenticity, and traceability. In our paper, when the mutual authentication protocol is working between vehicles and RSUs, the protocol offers the traceability with privacy protection using pseudonym and MAC (Message Authentication Code) chain. And also by using MAC-chain as one-time pseudonyms, our protocol does not need a separate way to manage pseudonyms.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.20 no.1
• /
• pp.17-31
• /
• 2010

In VANET (Vehicular Ad hoc NETwork), vehicles can efficiently verify a large number of signatures efficiently using batch verification techniques. However, batch verification performed independently in each vehicle raises many redundant verification cost. Although, an RSU (Road Side Unit) can perform the batch verification as a proxy to reduce this cost, it additionally requires an efficient method to identify invalid signatures when the batch verification fails. In this paper, we analyze several ways of constructing a distributed batch verification system, and propose an efficient distributed batch verification system in which participating vehicles perform batch verification in a distributive manner for a small size signature set. In our proposed system, each node can report the batch verification result or the identified invalid signatures list and the RSU who received these reports can identify the invalid signatures and efficiently exclude them.