• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.3 no.1
• /
• pp.20-26
• /
• 2000

In order to propose the design and installation information of vegetation belt, field investigation were carried out in the noise pollution control facilities of highway and the streets of a city for two years(1998~1999), and field tests were performed to analyze the noise attenuation effect of them. The noise pollution control facilities were generally classified into three types (noise barrier and vegetation belt type, mounding and vegetation belt type, vegetation belt type only). Most soundproof facilities were proved the noise reduction effects. But according to width, height, structure, auditory distance and planting forms of them, difference of noise reduction effects were investigated. The soundproof facility was suitable the mounding and vegetation belt type in the consideration of road environment, and the installation standard of vegetation was estimated that the width of vegetation was at least 20m and the length of that was 2 times in the distance from noise source.

• Journal of Environmental Science International
• /
• v.25 no.7
• /
• pp.989-998
• /
• 2016

In this study, we analyzed the content and compensation factors of 337 cases of national environmental disputes from five recent years (2000~2014). Causes of damage were noise-vibration in 234 cases (69%), sunlight in 48 cases (14%), air pollution in 19 cases (6%), water pollution in 15 cases (4%), odor in 13 cases (4%), and others factors in 8 cases (3%). Sources of damage were construction in 224 cases (66%), structures in 36 cases (11%), vehicle on road in 31 cases (9%), industry in 18 cases (5%), environmental facility in 11 cases (3%), livestock facility in 6 cases (2%), and other sources in 11 cases (3%). From the results of logistic regression analysis, important factors associated with compensation were found to be damage amount, damage distance, zoning districts, source, and administrative disposition.

• Journal of the Korean Society of Safety
• /
• v.29 no.6
• /
• pp.111-118
• /
• 2014

While large-sized facilities (type I II) have been managed systematically after the establishment of the Special Law for Safety Management on Facility, the management of small-sized facilities is relatively poor. The small-sized facilities have been managed by The Basic Law for Disaster and Safety Management, however, it is hard to manage them systematically as related standards are not established. Therefore, this study proposed the management plans for including the facilities such as some road tunnels and utility tunnels, which have the definite manager and a high possibility to harm the public, into type I and II facilities. In addition, it proposed the reinforcement plans of safety management for small-sized and vulnerable facilities such as breast wall and cut slopes, traditional markets and pedestrian bridges, which are fundamental facilities closely related to people's life, although a budget and a man-power are not enough.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2001.10a
• /
• pp.246-251
• /
• 2001

This study is aimed to develop system that can export height automatically with Hierarchical Delaunay Triangulation and finally provide profile of hydraulic channel using 3D terrain geometry model. In this study, by using the object-oriented technique, we developed the traverse and cross-section design system of agricultural facilities, which maintain a consistency in the irrigation design process. This system can design the traverse and cross-section profile for the line type facilities. The results of this study, as for the design based on geography, after carrying out the modeling by using TIN of which employs Delaunays algorithm, it was found that the latitudinal design of the facility is feasible. And, as for the formulation of TIN, we obtained more precise result from using contour, stream, and road data rather than using the contour by itself.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1998.10a
• /
• pp.59-65
• /
• 1998

A thematic land cover map of Pusan port area was developed using Landsat satellite TM(Thematic Mapper) image. Two types of digital data which are road and sea water layer are extracted from existing paper map were overlayed over the developed land cover map. SPIN-2(KNR-1000) image was utilized to make a facility map of JaSungDae port. SPIN-2 image, which has a cell resolution of 1.56 m showed higer accuracy than TM image, which has a cell resolution of 30 m for facility mapping. Overall, the techniques of digital mapping using satellite image are very useful, effective and efficient.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.448-449
• /
• 2008

This paper presented survey and analysis on short-term Emergency rating by considering facility-conditions of transmission lines in KEPCO, such as the age of ACSR conductors, a place of sleeve connecting, and road clearance, etc.

• Journal of Radiation Protection and Research
• /
• v.34 no.1
• /
• pp.1-7
• /
• 2009

It is expected that a substantial amount of spent fuels will be transported from the four nuclear power plant (NPP) sites in Korea to a hypothetical centralized interim storage facility or a final repository in the near future. The cost for the transportation is proportional to the amount of spent fuels. In this paper, a cost estimation program is developed based on the conceptual design of a transportation system and a logistics analysis. Using the developed computer program, named as CASK, the minimum capacity of a centralized interim storage facility (CISF) and the transportation cost for PWR spent fuels are calculated. The PWR spent fuels are transported from 4 NPP sites to a final repository (FR) via the CISF. Since NPP sites and the CISF are located along the coast, a sea-transportation is considered and a road-transportation is considered between the CISF and the FR. The result shows that the minimum capacity of the interim storage facility is 15,000 MTU.

• Journal of Korean Society of Rural Planning
• /
• v.1 no.2
• /
• pp.67-76
• /
• 1995

The actual condition of farmstead, mainly livestock facility, was surveyed in ChungChongBukDo in order to find out factors and problems of farmstead planning design. From the data collected, a type, plot, size and scope of farmstead, relationship of house and farmstead, topography, climate, proprietor's opinion on them were analyzed or obtained as the basic design criteria for planning: designs. The best type of farmsteads was individual farm having livestock facilities. They were mostly breeding a kind of livestock without their plan and Bone planning at residing area. The south aspect of the facility was extremely much and slope of the land was mostly 15。 below. Wind blows from East-South in summer and winter wind are West-North extremely much. Sun heat was mostly above 6 hours. In the case of collective and composite farmstead, proprietors wanted that a head of cow has 1,000-3,000 pyeong, the area of facility has 1,500-2,000 pyeong, total area of farmstead has 45,000-400,000 pyeong and an estimated expense is 0.2 - 1.5 billion won. Farmstead planning design was proposed through field survey results and contents of'references. Examples of farmstead planning design were composite and concentrated type and existed according to the situation of road(North, South, East, and West).

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.4
• /
• pp.146-154
• /
• 2011

Recently, the paradigm of social infrastructure investment has been changed from new construction to maintenance and management. As a consequence, the management and maintenance system of existing highway facilities needed an innovation involving the concept of asset management. This paper discusses the new facility management system suitable to local highway agencies. The new system incorporates asset management concept so that it can analyze the network level facility management solution and it can also improve the budget efficiency for local government. This paper also presents systematic method to integrate various facilities for management system.

• Journal of the Korean Society of Safety
• /
• v.26 no.5
• /
• pp.7-12
• /
• 2011

The crash cushion has drawn a great attention because of its versatility, efficiency and simplicity in reducing the mortality and damages from traffic accidents. However, the existing cushion systems are high priced or have limited functions. The purpose of the study was to devise an improved crash cushion which can offer higher safety compared to the available ones at present. In addition, the conformity of the cushion with the facility standards was assessed through computer simulation for collision with vehicles. The novel cushion system adopts the used tires as shock absorber, which can not only secure cushioning effect but also reduce the production cost. Moreover, it is highly durable and easy to maintain and repair the damaged parts. According to the simulation using BARRIER VII program, the novel cushion system showed PHD of 17.4 g and 10.1 g for a frontal collision and a side collision, respectively. Based on the results, it could be concluded that the novel cushion system met the test standards in the guideline for road safety facility installation and management.