• International Journal of Highway Engineering
• /
• v.17 no.5
• /
• pp.57-66
• /
• 2015

PURPOSES: Nighttime driving is very different from daytime driving because drivers must obtain nighttime sight-distances based on road lights and headlights. Unfortunately, nighttime driving conditions in Korea are far from ideal due to poor lighting and an insufficient number of road lights and inadequate operation and maintenance of delineators. This study is conducted to develop new standards for nighttime road visibility based on experiments of driver perception for nighttime visibility conditions. METHODS : In the study, perception level and satisfaction of nighttime visibility were investigated. A total of 60 drivers participated, including 34 older drivers and 31 young drivers. To evaluate driver perceptions of nighttime road visibility, fuzzy set theory was used because the conventional analysis methods for driver perception are limited in effectiveness for considering the characteristics of perception which are subjective and vague, and are generally expressed in terms of linguistic terminologies rather than numerical parameters. RESULTS : This study found that levels of nighttime visibility, as perceived by drivers, are remarkably similar to their satisfactions in different nighttime driving conditions with a log-function relationship. Older drivers evaluated unambiguously degree of nighttime visibility but evaluations by young drivers regarding it were unclear. CONCLUSIONS : A minimum value of brightness on roads was established as YUX 30, based on final analyzed results. In other words, road lights should be installed and operated to obtain more than YUX 30 brightness for the safety and comfort of nighttime driving.

• Journal of Digital Convergence
• /
• v.17 no.11
• /
• pp.207-213
• /
• 2019

The fuel-cut coast-down driving mode is activated when the acceleration pedal is released with transmission gear engaged, and it's a default function for electronic-controlled engine of vehicles. The fuel economy becomes better because fuel injection stops during fuel-cut driving mode. A fuel-cut detection method is suggested in the study and it's based on the speed, acceleration and road gradient data from GPS sensor. It detects fuel-cut driving mode by comparing calculated acceleration and realtime acceleration value. The one is estimated with driving resistance in the condition of fuel-cut driving and the other is from GPS sensor. The detection accuracy is about 80% when the method is verified with road driving data. The result is estimated with 9,600 data set of vehicle speed, acceleration, fuel consumption and road gradient from test driving on the road of 12km during 16 minutes, and the road slope is rather high. It's easy to detect fuel-cut without injector signal obtained by connecting wire. The detection error is from the fact that the variation range of speed, acceleration and road gradient data, used for road resistance force, is larger than the value of fuel consumption data.

• Journal of Biomedical Engineering Research
• /
• v.38 no.1
• /
• pp.32-42
• /
• 2017

The aim of this study was to evaluate driving performance of Healthy and disabled groups (with or without driver's license) to control steering wheel by using steering assistive devices in the driving simulator. The persons with partial loss of use of all four limbs have problems in operation of the motor vehicle because of functional loss to operate steering wheel. Therefore, if steering assistive devices for grasping the steering wheel are used to control the vehicle on the road in persons with disabilities, the disabled persons can improve mobility in their community life by driving a motor vehicle safely. Ten healthy subjects (with or w/o driver's license) and ten subjects with physical disabilities (with or w/o driver's license) were involved in this study to evaluate driving performance to operate steering wheel by using four types of steering assistive devices (Single-pin, V-grip, Palm-grip, Tri-pin) in driving simulator. STISim Drive 3 software was used to test the steering performance in four scenarios: straight road at low and high speed of vehicle (40 km/h and 80 km/h), curved road at low and high speed of vehicle (40 km/h and 80 km/h). This study used two-way ANOVA in order to compare the effects of two factors (type of steering assistive device and subject group) in the three dependent variables of driving performance (the lateral position of vehicle, standard deviation of lateral position representing the variation of the left and right movement of the vehicle and the number of line crossing). The mean values of the three dependent variables (lateral position, standard deviation of lateral position, the number of line crossing) of steering performance were statistically significantly smaller for the healthy or disabled groups with driver's license than the other groups without driver's license on the curved road at high speed of vehicle compared to low speed of vehicle.

• Journal of Korean Society for Atmospheric Environment
• /
• v.31 no.6
• /
• pp.562-572
• /
• 2015

$NO_x$ emissions from diesel vehicles have been regarded as a main cause of high $NO_2$ concentration in metropolitan area. Recent studies have shown that the on-road $NO_x$ emissions of diesel vehicles are quite higher than the emission limits specified with the pre-defined test method for emission certification. To reduce air pollutants effectively, the discrepancy of emissions in certification and real-driving conditions should be tackled. In this study, the real-driving emissions have been estimated with portable emission measurement system (PEMS). The results of this study have shown that the on-road $NO_x$ emissions from diesel vehicles have been decreased as the introduction of stricter emission regulation, EURO-6, but additional reduction should be still required and robust technologies should be applied to control $NO_x$ in real-driving conditions. RDE-LDV (Real Driving Emission - Light Duty Vehicles) test method being developed in the European Union can represent excessive on-road $NO_x$ emissions of diesel vehicles as applied emission technologies and can be a solution to remove discrepant $NO_x$ emissions between certification and Korean real-driving conditions. Among the $NO_x$ reduction technologies for EURO-6 diesel vehicles, selective catalytic reduction (SCR) system has shown the better performance than lean $NO_x$ trap (LNT) system to control on-road $NO_x$ emissions. Implementing RDE-LDV will require vehicle manufacturers to adopt the more effective $NO_x$ reduction technology in real driving conditions.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.6
• /
• pp.214-227
• /
• 2021

The purpose of this study is to find the driving difficulty of automated vehicles in terms of road infrastructure operation. It was judged out of this study that the level of automated driving would be enhanced if the road situation recognition ability was advanced through the presentation of infrastructure information during the difficult driving situations. The difficulty evaluation index was divided into three stages, and a survey of experts and an AHP were conducted. The result of the AHP showed that the driving difficulty of the interrupted flow was much higher than that of the uninterrupted flow. The AHP results also showed that and the driving difficulty of unsignalized intersections and roundabouts under an interrupted flow was evaluated as the highest. The top six driving situations with high difficulty were also evaluated to occur under unsignalized intersections and roundabouts.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.45
• /
• pp.145-154
• /
• 1998

The effects of secondary task on driving performance and subjective workload were investigated during a simulated driving. The driving performance was determined by the appropriateness of break timing. The driving simulator was provided by the Korea Road Traffic Safety Association. The subjective workload was tested by using a multidimensional measure such as NASA-TLX. Road was categorized into two types: narrow alley and wide street. The secondary task included pushing the number on the cellular phone, pushing radio channel, and conversing with a passenger. Seventeen subjects volunteered in the study. The data were analyzed by using SAS. Results showed that using the cellular phone and pushing channel during driving caused 3∼22% decline of driving performance and 42∼59% increase of subjective workload respectively. These results indicated that the secondary task could be potentially dangerous although there was not a significant performance decrease due to the notable increase of mental workload. In the future, if we can use a more sensitive and realistic driving simulator, the effects of secondary task under a dynamic driving situation can be investigated.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.9
• /
• pp.208-214
• /
• 2014

Vehicle dynamic states used in various advanced driving safety systems are influenced by road geometry. Among the road geometry information, the vehicle pitch angle influenced by road slope and acceleration-deceleration is essential parameter used in pose estimation including the navigation system, advanced adaptive cruise control and others on sag road. Although the road slope data is essential parameter, the method measuring the parameter is not commercialized. The digital map including the road geometry data and high-precision DGPS system such as DGPS(Differential Global Positioning System) based RTK(Real-Time Kinematics) are used unusually. In this paper, low-cost cascade extended Kalman filter(CEKF) based road slope estimation method is proposed. It use cascade two EKFs. The EKFs use several measured vehicle states such as yaw rate, longitudinal acceleration, lateral acceleration and wheel speed of the rear tires and 3 D.O.F(Degree Of Freedom) vehicle dynamics model. The performance of proposed estimation algorithm is evaluated by simulation based on Carsim dynamics tool and T-car based experiment.

• International Journal of Automotive Technology
• /
• v.7 no.2
• /
• pp.227-235
• /
• 2006

In this paper a robust image processing method with modified Otsu algorithm to recognize the road lane for a real-time controlled autonomous vehicle is presented. The main objective of a proposed method is to drive an autonomous vehicle safely irrespective of road image qualities. For the steering of real-time controlled autonomous vehicle, a detection area is predefined by lane segment, with previously obtained frame data, and the edges are detected on the basis of a lane width. For stable as well as psudo-robust autonomous driving with "good", "shady" or even "bad" road profiles, the variable threshold with modified Otsu algorithm in the image histogram, is utilized to obtain a binary image from each frame. Also Hough transform is utilized to extract the lane segment. Whether the image is "good", "shady" or "bad", always robust and reliable edges are obtained from the algorithms applied in this paper in a real-time basis. For verifying the adaptability of the proposed algorithm, a miniature vehicle with a camera is constructed and tested with various road conditions. Also, various highway road images are analyzed with proposed algorithm to prove its usefulness.

• Journal of ILASS-Korea
• /
• v.22 no.4
• /
• pp.218-224
• /
• 2017

In order to improve the quality of air in urban areas, the emission regulations are being strengthened by the government. The on-road test of light-duty vehicles was started with PEMS because certification test mode does not sufficiently reflect on-road conditions. Therefore, The PEMS-based test was implemented from Sep. 2017 in Europe and Korea. However, this is lack of data on various on-road patterns in Korea. The purpose of the present study has analyzed the effect of speed per acceleration and acceleration on NOx emission on-road driving. The test route consisted of urban, rural, and motorway in Seoul. This study has been conducted by Euro-6 vehicles using on SCR system with PEMS. The on-road emission characteristics were evaluated by moving averaging windows (MAW) method. In results, RDE-NOx by severe driving pattern has been 1.4 times higher than soft driving pattern NIER Route 1.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.143-148
• /
• 2008

This Study is about driving simulation after road design by 3D-GIS in digital elevation model from digital aerial photogrammetry. For designing roads efficiently it's very important to consider geographical features before design when analyze the view. Nevertheless, existing studies is mainly restricted in the mountainous, despite of using digital map or aerial photogrammetry and the study which used aerial photo in the area where the road designing is made really is not get executed. Therefore, this study will do 3D-road design and driving simulation by appling really road design data to topography, on the basis of digital elevation generated from aerial photogrammetry.