• Journal of Korean Society of Transportation
• /
• v.32 no.2
• /
• pp.170-178
• /
• 2014

Until now, several research on the relationship of traffic crash occurrences and geometric had been conducted and revealed that projects of road alignment, geometric improvement and hazardous segment selection reduced the number of accidents and accident severities. However, such variables did not consider the non-homogeneous characteristics of roadway segments due to the difficulty of data collection, which results in under-estimation of the standard error affecting the overall modeling goodness-of-fit. This study highlights the importance of non-homogeneity by looking at the effect of the non-homogeneous geometric variables through the modeling process. The model delivers meaningful results when using some geometric variables without relevant geometrics' variables.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.2
• /
• pp.35-43
• /
• 2013

Georeferenced SLI(Street-Level Imagery) services such as Google Streetview, which contain abundant information about the real world, can increase its applicability substantially through conflation with other spatial datasets. For this purpose, we propose a method to improve a correspondence of building region to combine building information more accurately. First, the spatial inconsistency between SLI and vector map is removed by alignment based on road intersections. Then, visible building regions are searched from the spatial inconsistency-removed vector map, and the optimal corresponding building areas are determined in the SLI scene using the visible regions as seed information. The experimental results demonstrated that our method had improved the accuracy of building region correspondence by about 8%. Therefore, our method can be utilized effectively for enhancement of conflation service based on the SLI.

• Journal of architectural history
• /
• v.19 no.6
• /
• pp.155-171
• /
• 2010

King Seong carried out the large-scale construction transferring the capital from Wungjin (Gongju) to Sabi (Buyeo) in 538. But because most of the Buyeo area was the low swamp in the time, it needed above all to form a site before transferring the capital. Until recently, in addition to the scientific excavation, the relief excavations for the construction of new building or the formation of road were conducted on many sites in the Buyeo area. As a result, many remains which were formed on the low swamp including the temple site of Neungsan-ri, Dongna Castle, the remains of Ssangbuk-ri (280-5 Bukpo, Hyeonnaedeul) and the remains of Gua-ri were identified. Also in these remains, the various engineering construction methods irrespective of the nature of remains were used for the purpose of the soft ground reinforcement as follows: mattress method of construction, pile designation, stone alignment, filing of decomposed granite soil, culverts and storage tanks. Especially, the mattress method of construction and the pile designation are thought to be the traditional engineering construction method at least in that they are appeared since the Three Han Sates era. And these soft ground construction methods had an effect on the construction of reservoir in Japan at the time. In the future, the construction method for soft ground reinforcement shall be concerned and studied further in the architecture and the civil engineering as well as the archeology.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6D
• /
• pp.961-968
• /
• 2006

Curbs and L-type gutters installed at the edge of a road are very important structures to protect pedestrians from traffic accidents and to restraint slip of cars due to rain. However, existing construction method where great parts of the construction progress are done by human power has many problems in workability, quality and cost etc. In this paper, a new construction method for improvement in workability and quality for curbs and L-type gutters is developed. In order to investigate the structural safety and quality of curbs and gutters installed by the new method, tensile and lateral load tests are performed on curbs installed by existing and new methods and uniaxial compression tests are also performed on concrete samples of gutters constructed by existing and new methods. The test results show that the alignment of curbs and the strength of gutter concrete are very much improved by applying the new method. The tensile and lateral load capacities of the curbs installed by the new method are 10.7 and 2.5 times higher than those of curbs by existing method, respectively.

• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.157-165
• /
• 2011

With respect to the trend of highway traffic accident, highway accident is in decline, whileas, the fatality is on an increasing trend. Thus, many efforts to decrease highway traffic accidents and improve the safety, are required. In particular, in case of highway, the management standard by grade for accident black spot is designated. Thus, investing the effect factors by grade for highway traffic accident is required in detail. Thus, in this study, the factors affecting the traffic accidents among the environmental factors based on the graded data for the accident black spot in the applicable section targeting the Seoul-Pusan Express Highway, were reviewed; accident forecasting model which would analyze the characteristics of the accidents for determining the accident grade, was developed. As a result of establishing a model by using Quantification Theory of Type II, considering the characteristics of the dependent and independent variables based on the geometric structure, 'the fixed variable' among the variables relating to the accident, for the variables influencing over the accident grade, 'the type of vans, a chassis and people', 'the trailers, special vehicles and chassis people' and 'the negligence of watching and cloudy weather' were analyzed as common factors, in case of 'horizontal alignment', 'longitudinal slope' and, 'barricade' respectively.

• International Journal of Highway Engineering
• /
• v.11 no.2
• /
• pp.45-54
• /
• 2009

Despite vehicle instability problems caused by gusts of wind on freeways located in mountain or seaside areas, current national highway design standards overlook their detrimental effects, and if higher design speed freeways being proposed now by the government are in operation, the strong effect of the gust of wind becomes a highway alignment design issue. This paper presents the vehicle movements and their resulting safety effects by checking vehicle sliding and overturn based on vehicle dynamic analysis for the case when a gust of wind blows to vehicles negotiating curves on higher speed freeways. In this analysis, vehicle types, curve radii, motorist responsive time to vehicle driving path changes, and vehicle speeds are systematically arranged to get vehicle sliding and overturn values in each different conditions. The results showed that there were little overturn possibilities when wind speed would stay in 50m/sec with higher than 600 meter curve radii. Interestingly it was also found in sliding checks that, although being safe at less than 15.0m/sec wind speed levels, there appeared the need of vehicle travel prohibitions when the wind speed could exceed 25.0m/sec level. The findings in this research is of information in future higher speed freeway designs, and particularly useful when designing freeways passing frequent gust wind areas.

• Journal of Korean Society of Transportation
• /
• v.24 no.2 s.88
• /
• pp.113-124
• /
• 2006

Among tile traffic safety facilities, median barriers are installed above 4-lane national roads due to the awareness of haying an effect on preventing the front collision. Studies about the installation effect analysis of median harrier have been carried out through both at home and outside, mainly indicating total accident reduction effect on pertinent sections. In sum, study about how the accident occurrence form is changed at the point classified by the accident type or severity is insignificant. In the case of outside the country, calculating the accident reduction effect according to the type of median barriers is main research and in domestic, though there is a part of researches assessing reduction effect by accident types, it is not reliable in the view or statistics because of using only 1year's before-aftev data installing the facility, So in this Paper. it is the main purpose to presume the accident conversion effect. For this, we conduct an investigation and collect data about 7-year's accident data containing before-after Project, safety facilities foundation records and index of road alignment on the subject of 4-1ane national roads(108.6km) existing median barrier. Next. using the empirical bayes method, we estimate a model construction and accident conversion effect of accident type severity. We expect the result or this Paper will be applied for a policy execution and Presentation of facility standard related to median barrier from now on.

• Journal of Korean Society of Transportation
• /
• v.23 no.7 s.85
• /
• pp.159-163
• /
• 2005

The propriety between suppliers and demanders in geometric design is very important. Although the final purpose of constructing roads is to concern about the driver s comfort, unfortunately, it has not been considered so far. We've considered the regularity and quickness in considering driver's comfort but there should be considered the safety for the accident as well. If drivers are appeared to be more speeding than designer's intention, there will be needed some supplements to increase the safety rate for the roads. Even if both an upward and downward section are supposed to exist at the same time for solid geometry of the roads like this, it is true that the recent design for the 3-D solid geometry section has been done as flat 2-D and the minimum plane curve radius and the maximum cant have been decided just by calculating without considering operating speed between an upward and downward section at the same point. In this investigation, thus, I'd like to calculate the safety of the cant by considering the speed features of the solid geometry for the first lane of four lane rural roads. To begin with, we investigated the driving speed of the car, which is not been influenced by a preceding car to analyze the influence of the geometrical structure by using Nc-97. Secondly, we statistically analyzed the driving features of the solid geometry after comparing the 6 sections, that is, measuring the driving speed feature at 12 points and combining the influence of the vertical geometry and plane geometry to the driving speed of the plane curve which was researched before. Finally, we estimated the value of cant which considers the driving speed not by using it which has applied uniformly without considering it properly, though there were some differences between a designed speed and driving speed through the result of the basic statistical analysis but by introducing the new safety rate rule, a notion of ${\alpha}$. As a result of the research, we could see the driving features of the car and suggest the safety rate which considers these. For considering the maximum cant, if we apply the safety rate, the result of this experiment, which considers 3-D solid geometry, there'll be the improvement of the driver's safety for designing roads. In addition, after collecting and analyzing the data for the road sections which have various geometrical structures by expanding this experiment it is considered that there should be developed the models which considers 3-D solid geometry.