• Journal of the Korean Society of Safety
• /
• 제31권5호
• /
• pp.7-15
• /
• 2016

The purpose of this paper is to carry out Failure Modes and Effects Analysis (FMEA) and use criticality in order to determine risk priority number of the components of electric power installations in Engineering college building of D university. In risk priority number, GROUP A had 7 failure modes; more specifically, Transfomer had 4 modes, Filter(C)(1 mode), LA(1 mode), and CB(MCCB)(1 mode), and thus 4 components had failure modes. In terms of criticality, high-grade group a total of 16 failure modes, and 7 components-LA(1 mode), CB(MCCB)(1 mode), MOF(2 modes), PT(1 mode), Transformer(7 modes), Cable(3 modes), and Filter(C)(1 mode)-had failure modes. Comparison of risk priority number and criticality was made. The components which had high risk priority number and high criticality were Transformer, Filter(C), LA, and CB(MCCB). The components which had high criticality were MOF and cable. In particular, Transformer(RPN: 4 modes, Criticality: 7 modes) was chosen as an intensive management component.

• Journal of the Korean Society for Railway
• /
• 제12권6호
• /
• pp.921-926
• /
• 2009

The RPN provides information which includes the risk level and the priority order of maintenance tasks for components. However, if there is no sufficient historical failure data, the historical failure data from other sources can be applied to the target system. And if we use historical data from other sources without any process, there will be concomitant problems according to a discord of each system characteristic, a difference between the present and the date of failure data, etc. In this paper, a new methodology is proposed to model the failure rate as a fuzzy function to resolve these problems. Taking advantage of this result, the RPN can be calculated by using the fuzzy operation. The proposed method is applied to the substation system.

• Journal of the Korean Institute of Gas
• /
• 제17권4호
• /
• pp.39-44
• /
• 2013

There have been large explosions at some chemical plants recently. Accidents in chemical plants have been caused mainly by servicing for maintenance. There is a need to find a key target for effective injury prevention in maintenance. In this paper, facilities were selected as a key target and the risk priority numbers of the facilities were calculated in order to prioritize preventative measures. The research method was based on the followings; the list of the facilities is found through injury analysis. Then, the risk of each facility was calculated by the frequency of accidents and the working day loss through injuries. In addition, the risk of the facilities was calculated again by the frequency and the severity based on knowledge and experience of experts. As a result, the facilities in chemical plant maintenance are ranked in order of high to low risk priority number; reactor, dryer, tank lorry, etc. In the future, special measures and attention should be directed according to the risk priority number during the maintenance of chemical plants.

• Nuclear Engineering and Technology
• /
• 제53권5호
• /
• pp.1464-1478
• /
• 2021

Selective Production of Exotic Species is an innovative plant for advanced nuclear physic studies. A radioactive beam, generated by using an UCx target-ion source system, is ionized, selected and accelerated for experimental objects. Very high vacuum conditions and appropriate safety systems to storage exhaust gases are required to avoid radiological risk for operators and people. In this paper, Failure Mode, Effects, and Criticality Analysis of a preliminary design of high activity gas recovery system is performed by using a modified Fuzzy Risk Priority Number to rank the most critical components in terms of failures and human errors. Comparisons between fuzzy approach and classic application allow to show that Fuzzy Risk Priority Number is able to enhance the focus of risk assessments and to improve the safety of complex and innovative systems such as those under consideration.

• Journal of the Korean Society of Safety
• /
• 제31권2호
• /
• pp.10-17
• /
• 2016

The purpose of this paper is to deduct components that are in the group of highest risk(top 10%). the group is conducted for classification into groups by values according to risk priority through risk priority number(RPN) of FMEA(Failure modes and effects analysis) sheet. Top 10% of failure mode among total potential failure modes(72 failure modes) of ESS included 5 BMS(battery included) failure modes, 1 invert failure mode, and 1 cable connectors failure mode in which BMS was highest. This is because ESS is connected to module, try, and lack in the battery part as an assembly of electronic information communication and is managed. BMS is mainly composed of the battery module and communication module. There is a junction box and numerous connectors that connect these two in which failure occurs most in the connector part and module itself. Finally, this paper proposes RPN by each step from the starting step of ESS design to installation and operation. Blackouts and electrical disasters can be prevented beforehand by managing and removing the deducted risk factors in prior.

• Journal of Korean Society for Quality Management
• /
• 제47권1호
• /
• pp.97-108
• /
• 2019

Purpose: The purpose of this study is to propose a new Risk Priority Number(RPN) evaluation method which analyzes value of product functions by mining customer opinions in Social Network Service(SNS). Methods: A traditional RPN is measured by three evaluation standards (Severity, Occurrence, Detection) which are analyzed by manufacturing engineers and researchers. On the other hand, these standards are analyzed by customers' viewpoints through SNS opinion mining in this research. In order to extract customer feedbacks from textual data sets, the methodology in this paper implies natural language processing, hereby collecting product related data sets and analyzing the opinions automatically. An emotional polarity of an opinion indicates severity, while the number of negative opinion shows occurrence, and the entire number of customer opinion refers to detection. Results: The results of this study are as follows; As a result of the CRPN evaluation, it is confirmed that the features evaluated as risky are highly likely to be improved in the next series. Therefore, CRPN is an effective risk assessment model that reflects customer feedback. Conclusion: Reflecting customer feedback is a useful tool for risk assessment of the product as well as for developing new products and improving existing products.

• Proceedings of the Korean Geotechical Society Conference
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.411-418
• /
• 2000

With the limited amount of budget and time, it is required to determine the priority of investment when there are a large number of hazardous slopes. In this paper, the Rock Slope Risk Rating System is developed based on the combination of the hazard of failure and the damage potential. By applying the proposed rating system to 253 rock slopes in Korean National Highway, it was possible to determine the priority of investment on road cut slopes.

• Journal of the Korean Society of Safety
• /
• 제30권5호
• /
• pp.108-113
• /
• 2015

Plastic injection moulding machine is widely used for many industrial field. It is classified into mandatory safety certification machinery in Industrial Safety and Health Act because of its high hazard. In order to prevent industrial accidents by plastic injection moulding machine, it is necessary for designer to identify hazardous factors and assess the failure modes to mitigate them. This study tabulates the failure modes of main parts of plastic injection moulding machine and how their failure has affect on the machine being considered. Failure Mode & Effect Analysis(FMEA) method has been used to assess the hazard on plastic injection moulding machine. Risk and risk priority number(RPN) has been calculated in order to estimate the hazard of failures using severity, probability and detection. Accidents caused by plastic injection moulding machine is compared with the RPN which was estimated by main regions such as injection unit, clamping unit, hydraulic and system units to find out the most dangerous region. As the results, the order of RPN is injection unit, clamping unit, hydraulic unit and system units. Barrel is the most dangerous part in the plastic injection moulding machine.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• 제26권5호
• /
• pp.1323-1333
• /
• 2016

According to spreading of smart devices and development of communication technology, the security issues come to the fore in the modern factory. Especially, the smart facpry should be considered the risk management plan how to identify and evaluate, control the risks. In this paper, we suggest the minimum security requirements applying SFRPN(Smart Factory Risk Priority Number) model to domestic smart factory on the basis of the results inspecting factories.

• Journal of the Korean Dietetic Association
• /
• 제21권1호
• /
• pp.25-36
• /
• 2015

In this study, we attempted to improve hospital food delivery service quality and customer satisfaction by using FMEA (Failure Mode and Effect Analysis), which is applied to the quality control of products in manufacturing plants. Subjective food delivery service quality improvement was judged based on a 5-point likert scale. Traditional FMEA uses an RPN (Risk priority number) to evaluate the risk level of a component or process. The RPN index was determined by calculating the product of severity, occurrence, and detection indexes. In our results, total RPN value (P<0.01) significantly decreased after FMEA introduction, whereas customer satisfaction (P<0.001) and food delivery service quality (P<0.001) significantly increased. Specifically, foodservice errors (P<0.01) and loss cost (P<0.01) were significantly improved by FMEA introduction. Taken together, we suggest that FMEA reduces critical activities and errors in foodservice delivery caused by simple priority selection.