• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2007.05a
• /
• pp.440-445
• /
• 2007

This paper deals with assessment of risk component for electrical safety and investigation on the spot of computer room in elementary middle high school. The investigation was carried out side by side for floor, outlet, panel board, earth leakage circuit breaker at computer room In order to assess electrical safety at computer room, grounding simulator and power quality monitor have been used. Potential rise has been measured and analyzed for ground rod and grounding grid by using the simulator. Phase and neutral-line current have been monitored in real time. As a consequence, it is desirable for us to install conductive tile at floor of computer room Grounding grid had better than ground rod for electrical safety. Neutral-line current was produced by unbalanced phase current.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.795-800
• /
• 2009

Railway safety is one aspect of the transport service quality delivered to passengers, employees and third parties. To improve safety by a cultural shift from a deterministic to a risk based approach, European Railway Agency (ERA) introduces common and transparent methods to monitor safety performance and set targets and establishes safety management systems. The objective of this study is to review the common safety performance management method of the ERA(European Railway Agency) for it's application to the Korea railway. For this end, the risk assessment models were developed based on the accident scenarios and domestic railway accidents had been investigated and quantitative and qualitative analyses was performed using the developed information system.

• East Asian Economic Review
• /
• v.18 no.3
• /
• pp.253-276
• /
• 2014

We examine which traditional asset pricing variables together with bank-specific accounting variables explain the cross-sectional variation of future bank stock returns, using a firm-level data of eight Asian countries. Our empirical evidence shows that exchange rate risk, firm size, the book-to-market ratio, and the net income ratio are important in explaining future bank stock returns during normal times. However, during the Global Financial Crisis period, different variables such as local market beta, illiquidity risk, equity ratio, and off-balance sheets ratio were statistically significant. Thus, researchers and policy practitioners should monitor these variables during normal times as well as during times of crisis.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.3
• /
• pp.147-156
• /
• 2012

Most people in our society use credit card instead of cash or check, so credit card is very important economic method. Credit card supposed to be safe, but hackers hack credit card for illegal deal. Also hackers make fake credit card and issue fake credit card to other people. In this thesis it will study and analyze damage case for safe credit card deal. It will use safe credit card system to insert variety of information and data of using pattern in artificial intelligence network, so print out the possibility of risk and monitor the risk of credit card user's deal pattern, so if one of user's pattern is different than normal pattern, it will pop up message in consultant's screen. This thesis will study and suggest way of prevent from illegal deal and user friendly credit card checking system.

• Toxicological Research
• /
• v.21 no.4
• /
• pp.297-301
• /
• 2005

Farmers are generally expressed to pesticides through mixing loding, application activity and harvesting of crop after application of pesticides. The present work investigated the exposure and risk of furathiocarb to workers when harvesting of cucumber was carried out in green house after application of furathiocarb EC. Glove was used for the hand exposure assessment, socks for foot and dermal patches for the other parts of body. Personal air monitor equipped with a XAD-2 resin was used for the respiratory exposure assessment. During the harvest of cucumber in green house, the initial rate of potential dermal exposure (Day 1) for methidathion was 1.3 mg/hr. The major exposure parts were hand $(78\~83\%),\;thigh\;(5\~7\%)$ and arms $(6\~9\%)$ during 3 days' harvest. No exposure was detected from the respiratory monitoring. For risk assessment, the potential dermal exposure (PDE), the absorbable quantity of exposure (AQE) and the margin of safety (MOS) and margin of exposure (MOE) were calculated. In risk assessment of harvester exposure for 7days, all MOS was > 1 and MOE was > 100 indicating that possibility of risk was little.

• Safety and Health at Work
• /
• v.12 no.4
• /
• pp.462-470
• /
• 2021

Background: Fatigue is pervasive, under-reported, and potentially deadly where flight operations are concerned. The aviation industry appears to lack a standardized, practical, and easily replicable protocol for fatigue risk assessment which can be consistently applied across operators. Aim: Our paper sought to present a framework, supported by real-world data with subjective and objective parameters, to monitor aircrew fatigue and performance, and to determine the safe crew configuration for commercial airline operations. Methods: Our protocol identified risk factors for fatigue-induced performance degradation as triggers for fatigue risk and performance assessment. Using both subjective and objective measurements of sleep, fatigue, and performance in the form of instruments such as the Karolinska Sleepiness Scale, Samn-Perelli Crew Status Check, Psychomotor Vigilance Task, sleep logs, and a wearable actigraph for sleep log correlation and sleep duration and quality charting, a workflow flagging fatigue-prone flight operations for risk mitigation was developed and trialed. Results: In an operational study aimed at occupational assessment of fatigue and performance in airline pilots on a three-men crew versus a four-men crew for a long-haul flight, we affirmed the technical feasibility of our proposed framework and approach, the validity of the battery of assessment instruments, and the meaningful interpretation of fatigue and work performance indicators to enable the formulation of safe work recommendations. Conclusion: A standardized occupational assessment protocol like ours is useful to achieve consistency and objectivity in the occupational assessment of fatigue and work performance.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.31 no.4
• /
• pp.378-384
• /
• 2021

Objectives: Horse trainers ensure the horses they are training and monitor horse's health, hygiene. While most of the studies on horse trainer's health focused on musculoskeletal disorders, few studies have examined the health effect of occupational exposure. This study aimed to investigate the risk of lung cancer in Korean Horse trainers. Methods: Among the largest health screening program of health screening service of the National Health Insurance Corporation, 2,246 workers were selected for study. We utilized data from the National Health Insurance Service (NHIS) National Cohort Data Base 2005-2017. We performed analyses using a Cox's proportional hazards model to identify the risk of lung cancer in Horse trainers. Results: This study found that the horse trainers group had a higher risk of lung cancer 10.07 (95% CI :2.38-42.64) compared to other occupational group. Additionally, there was 6.5 times higher risk of lung cancer in non-smoker horse trainers group. Conclusions: We, thus, verified horse trainers could have relation with increase of lung cancer risk. As lung cancer is known as a cancer with a high contribution of occupational factors compared to other cancers, it is necessary to determine the efficacy of continuous attention and active management of occupational exposure.

• Journal of Gastric Cancer
• /
• v.18 no.4
• /
• pp.392-399
• /
• 2018

Purpose: To determine the incidence of incisional hernia (IH) in mini-laparotomy wounds and analyze the risk factors of IH following laparoscopic distal gastrectomy in patients with gastric cancer. Materials and Methods: A total of 565 patients who underwent laparoscopic distal gastrectomy for gastric cancer at Dong-A University Hospital, Busan, South Korea, between June 2010 and December 2015, were enrolled. IH was diagnosed through physical examination or computed tomography imaging. Incidence rate and risk factors of IH were evaluated through a long-term follow-up. Results: Of those enrolled, 16 patients (2.8%) developed IH. The median duration of follow-up was 58 months (range, 25-90 months). Of the 16 patients with IH, 15 (93.7%) were diagnosed within 12 months postoperatively. Multivariate analysis showed that female sex (odds ratio [OR], 3.869; 95% confidence interval [CI], 1.325-11.296), higher body mass index (BMI; OR, 1.229; 95% CI, 1.048-1.422), and presence of comorbidity (OR, 3.806; 95% CI, 1.212-11.948) were significant risk factors of IH. The vast majority of IH cases (15/16 patients, 93.7%) developed in the totally laparoscopic distal gastrectomy (TLDG) group. However, the type of surgery (i.e., TLDG or laparoscopy-assisted distal gastrectomy) did not significantly affect the development of IH (P=0.060). Conclusions: A median follow-up of 58 months showed that the overall incidence of IH in mini-laparotomy wounds was 2.8%. Multivariate analysis showed that female sex, higher BMI, and presence of comorbidity were significant risk factors of IH. Thus, surgeons should monitor the closure of mini-laparotomy wounds in patients with risk factors of IH undergoing laparoscopic distal gastrectomy.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.18 no.3
• /
• pp.239-247
• /
• 2008

Low back disorders (LBDs) have been the most common musculoskeletal problem in Korean workplaces. It affects many workers, and is associated with high costs to many companies as well as the individual, which can negatively influence even the quality of life of workers. The _evaluation of low back disorder risk associated with manual materials handling tasks can be performed using variety of ergonomic assessment tools such as National Institute for Occupational Safety and Health (NIOSH) Revised Lifting Equation (NLE), the Washington Administrative Code 296-62-0517 (WAC), the Snook Tables etc. But most of these tools provide limited information for choosing the most appropriate assessment method for a particular job and in finding out advantage and disadvantage of the methods, and few have been assessed for their predictive ability. The focus of this study was to _evaluate spinal loads in real time with lifting and pulling heavy cow leathers in variety of postures. Data for estimating mean trunk motions were collected as employees did their work at the job site, using the Lumbar Motion Monitor. Eight employees (2 males, 6 females) were selected in this study, in which the load weight and the vertical start and destination heights of the activity remained constant throughout the task. Variance components (three dimensional spaces) of mean trunk kinematic measures were estimated in a hierarchical design. They were used to compute velocity and acceleration of multiple employees performing the same task and to repetitive movements within a task. Therefore, a results of this study could be used as a quantitative, objective measure to design the workplace so that the risk of occupationally related low back disorder should be minimized.

• Safety and Health at Work
• /
• v.7 no.4
• /
• pp.381-388
• /
• 2016

Background: Relationships among portable scanning mobility particle sizer (P-SMPS), condensation particle counter (CPC), and surface area monitor (SAM), which are different metric measurement devices, were investigated, and two widely used research grade (RG)-SMPSs were compared to harmonize the measurement protocols. Methods: Pearson correlation analysis was performed to compare the relation between P-SMPS, CPC, and SAM and two common RG-SMPS. Results: For laboratory and engineered nanoparticle (ENP) workplaces, correlation among devices showed good relationships. Correlation among devices was fair in unintended nanoparticle (UNP)-emitting workplaces. This is partly explained by the fact that shape of particles was not spherical, although calibration of sampling instruments was performed using spherical particles and the concentration was very high at the UNP workplaces to allow them to aggregate more easily. Chain-like particles were found by scanning electron microscope in UNP workplaces. The CPC or SAM could be used as an alternative instrument instead of SMPS at the ENP-handling workplaces. At the UNP workplaces, where concentration is high, real-time instruments should be used with caution. There are significant differences between the two SMPSs tested. TSI SMPS showed about 20% higher concentration than the Grimm SMPS in all workplaces. Conclusions: For nanoparticle measurement, CPC and SAM might be useful to find source of emission at laboratory and ENP workplaces instead of P-SMPS in the first stage. An SMPS is required to measure with high accuracy. Caution is necessary when comparing data from different nanoparticle measurement devices and RG-SMPSs.