• 한국산업보건학회지
• /
• 제20권2호
• /
• pp.94-101
• /
• 2010

This study was performed to examine the asymmetry of hearing loss among the noise exposed male workers. Findings of otoscopic examination, pure tone audiometry and tympanometry were evaluated for 179 male workers working in the noise exposed workplace. And also selfadministered structured questionnaires were used for each worker's work-related and general characteristics including personal health behaviors. There were significant differences of hearing threshold between right and left ears at 1,000 Hz and 3,000 Hz(p<0.05). And also significant differences of hearing threshold were noted in the age group over 50 at 3,000 Hz, the high risk drinking group either at 3,000 Hz and 4,000 Hz, the work duration group 10-19 years at 3,000 Hz, the noise exposure group under 90 dB(A) at 3,000 Hz, the noise exposure group over 90 dB(A) at 1,000 Hz, the non-wearing protective device group at 4,000 Hz, and the wearing protective device group at 3,000 Hz(p<0.05). Further study is needed to explore the extent and the related factors of the asymmetry of hearing loss in the general population and occupationally noise exposed group.

• Computers and Concrete
• /
• 제16권2호
• /
• pp.261-274
• /
• 2015

This study established the standard recommended values and expansion fracture threshold values for the content of steel slag in controlled low-strength materials (CLSM) to ensure the appropriate use of steel slag aggregates and the prevention of abnormal expansion. The steel slags used in this study included basic oxygen furnace (BOF) slag and desulfurization slag (DS), which replaced 5-50% of natural river sand by weight in cement mixtures. The steel slag mortars were tested by high-temperature ($100^{\circ}C$) curing for 96 h and autoclave expansion. The results showed that the effects of the steel slag content varied based on the free lime (f-CaO) content. No more than 30% of the natural river sand should be replaced with steel slag to avoid fracture failure. The expansion fracture threshold value was 0.10%, above which there was a risk of potential failure. Based on the scanning electron microscopy (SEM) analysis, the high-temperature catalysis resulted in the immediate extrusion of peripheral hydration products from the calcium hydroxide crystals, leading to a local stress concentration and, eventually, deformation and cracking.

• Nuclear Engineering and Technology
• /
• 제55권2호
• /
• pp.432-442
• /
• 2023

Characterizing the behavior of nuclear reactor plate fuels is vital to the progression of advanced fuel systems. The states of pre- and post-irradiation plates need to be determined effectively and efficiently prior to and following irradiation. Due to the hostile post-irradiation environment, characterization must be completed remotely. Laser-based characterization techniques enable the ability to make robust measurements inside a hot-cell environment. The Laser Shock (LS) technique generates high energy shockwaves that propagate through the plate and mechanically characterizes cladding-cladding interfaces. During an irradiation campaign, two Idaho National Laboratory (INL) fabricated MP-1 plates had a fuel breach in the cladding-cladding interface and trace amounts of fission products were released. The objective of this report is to characterize the cladding-cladding interface strengths in three plates fabricated using different fabrication processes. The goal is to assess the risk in irradiating future developmental and production fuel plates. Prior LS testing has shown weaker and more variability in bond strengths within INL MP-1 reference plates than in commercially produced vendor plates. Three fuel plates fabricated with different fabrication processes will be used to bound the bond strength threshold for plate irradiation insertion and assess the confidence of this threshold value.

• Tuberculosis and Respiratory Diseases
• /
• 제87권2호
• /
• pp.134-144
• /
• 2024

Interstitial lung abnormalities (ILAs) are radiologic abnormalities found incidentally on chest computed tomography (CT) that can be show a wide range of diseases, from subclinical lung fibrosis to early pulmonary fibrosis including definitive usual interstitial pneumonia. To clear up confusion about ILA, the Fleischner society published a position paper on the definition, clinical symptoms, increased mortality, radiologic progression, and management of ILAs based on several Western cohorts and articles. Recently, studies on long-term outcome, risk factors, and quantification of ILA to address the confusion have been published in Asia. The incidence of ILA was 7% to 10% for Westerners, while the prevalence of ILA was about 4% for Asians. ILA is closely related to various respiratory symptoms or increased rate of treatment-related complication in lung cancer. There is little difference between Westerners and Asians regarding the clinical importance of ILA. Although the role of quantitative CT as a screening tool for ILA requires further validation and standardized imaging protocols, using a threshold of 5% in at least one zone demonstrated 67.6% sensitivity, 93.3% specificity, and 90.5% accuracy, and a 1.8% area threshold showed 100% sensitivity and 99% specificity in South Korea. Based on the position paper released by the Fleischner society, I would like to report how much ILA occurs in the Asian population, what the prognosis is, and review what management strategies should be pursued in the future.

• 한국산업보건학회지
• /
• 제9권2호
• /
• pp.145-157
• /
• 1999

Wood dust is created when machines are used to cut or shape wood materials. Industries of high risk of wood dust exposure are sawmills, dimension mills, furniture industries, and carpenters, etc. Health effects associated with wood dust exposure includes dermatitis, allergic respiratory effects and cancer. Health effects of wood dus t are mainly depend on the concentration, dust size and exposure time. This study were carried out to evaluate the concentration and particle size distribution of wood dust during working processes. The subjects of this study were 53 workers exposed to wood dust in 7 furniture factories and 5 musical instruments, and 5 sawmill factories. The average total wood dust concentrations measured by personal cascade impactor were $1.82{\pm}2.31mg/m^3$ in primary manufacture, $3.59{\pm}1.72mg/m^3$ in s econdary manufacture, $5.09{\pm}1.46mg/m^3$ in sanding operation. Mass median diameters of hardwoods dust were $3.36{\mu}m$ in primary manufacture, $4.25{\mu}m$ in secondary manufacture, $4.21{\mu}m$ in sanding operation. softwoods dust were $3.39{\mu}m$ in primary manufacture, $4.34{\mu}m$ in secondary manufacture. Particle size distributions showed a nearly the same pattern in each working processes. The sample concentration of all hardwood dust exceeded the Threshold Limit Value(TLV) and 20.8% of the softwood dust exceeded the Threshold Limit Value. The range of size distribution were $0.5-10{\mu}m$ in the soft and hardwood dust. The respirable dust of soft and hardwood took up 59% and above. Therefore new threshold limit value for wood dust should be needed in Korea. Also, it should be done for various studies on health effects related to occupational exposure of wood dust.

• Structural Engineering and Mechanics
• /
• 제85권4호
• /
• pp.531-543
• /
• 2023

The existing concrete bridges are time-varying working systems, where the maintenance strategy should be planned according to the time-varying performance of the bridge. This work proposes a time-dependent residual capacity assessment procedure, which considers the non-stationary bridge load effects under growing traffic and non-stationary structural deterioration owing to material degradations. Lifetime bridge load effects under traffic growth are predicated by the non-stationary peaks-over-threshold (POT) method using time-dependent generalized Pareto distribution (GPD) models. The non-stationary structural resistance owing to material degradation is modeled by incorporating the Gamma deterioration process and field inspection data. A three-span continuous box-girder bridge is illustrated as an example to demonstrate the application of the proposed procedure, and the time-varying reliability indexes of the bridge girder are calculated. The accuracy of the proposed non-stationary POT method is verified through numerical examples, where the shape parameter of the time-varying GPD model is constant but the threshold and scale parameters are polynomial functions increasing with time. The case study illustrates that the residual flexural capacities show a degradation trend from a slow decrease to an accelerated decrease under traffic growth and material degradation. The reliability index for the mid-span cross-section reduces from 4.91 to 4.55 after being in service for 100 years, and the value is from 4.96 to 4.75 for the mid-support cross-section. The studied bridge shows no safety risk under traffic growth and structural deterioration owing to its high design safety reserve. However, applying the proposed numerical approach to analyze the degradation of residual bearing capacity for bridge structures with low safety reserves is of great significance for management and maintenance.

• 한국산업보건학회지
• /
• 제33권3호
• /
• pp.332-345
• /
• 2023

Objectives: We examined the association of hearing with cardio-metabolic diseases, dyslipidemia, hypertension and diabetes mellitus according to the personal and occupational characteristics of workers exposed to noise. Methods: The subjects of the study were 237,028 workers who underwent 2, 3, and 4 kHz airway pure tone audiometry in 2015 and who underwent clinical tests to diagnose cardiovascular-metabolic diseases. Cardiovascular-metabolic diseases were defined using reference values for respective items including blood pressure (systolic/diastolic), fasting blood glucose, cholesterol, and triglycerides. The airway pure tone hearing threshold of 2, 3, and 4 kHz, the average threshold of 2-3-4 kHz, and the hearing loss by the average threshold of the primary examination were distinguished. Results: Workers with cardiovascular-metabolic disease had significantly higher average hearing thresholds and higher rates of hearing loss. Logistic regression analysis, which adjusted for demographic variables of gender and age and occupational variables such as workplace size, industry, and type of work, and cardiovascular-metabolic disease as independent variables, showed that the odds ratio of hypertension to hearing loss in the mid-frequency was 1.239 (95% confidence interval: 1.118-1.374). For hypertension was 1.159 (1.107-1.214) and for diabetes it was 1.166 (1.104-1.230) for hearing loss in the high-frequency. Hearing loss measured by mean hearing was 1.178 (1.105-1.256) for hypertension and 1.181 (1.097-1.271) for diabetes. Conclusions: Cardiovascular-metabolic diseases in noise-exposed workers are associated with an increased risk of hearing loss and should be accompanied by bio-monitoring of cardiovascular-metabolic diseases in addition to auditory surveillance.

• 한국음향학회지
• /
• 제24권6호
• /
• pp.353-357
• /
• 2005

이과적인 질환이나, 소음에 의한 청력소실이 없는 경우에도 노화에 의한 청력의 변화에 대해서는 잘 알려진 사실이다. 노인들의 청력에 대한보고는 있었지만, 한국인의 노화에 의한 청력변화에 관한 보고는 드물고, 남녀의 차이에 대한 연구는 제한적이며, 아직도 이견이 있다. 최근 조선대학교에서 개발한 청력검사결과 관리 프로그램 (ARCISM)을 이용하여 한국인의 노화성 난청에 대한 기준 청력범위를 구하고자 연구를 시도하였다. 일 년여 동안 대구파티마병원 건강검진센터에 방문한 환자 중 문진에 응한 1603명의 청력검사결과를 소음에 노출된 경우나 기타 이과적인 질환을 배제한 후, 노화에 따른 청력의 변화에 대해 20대에서 80대까지의 청력도를 구하였다. 나이에 의한 주파수 대역별 청력역치의 상승을 통계학적으로 유의하였으며. 고주파수로 갈수록 그 정도가 심하였다. 특히 4kHz와 8kHz에서 남자에 있어서 여자보다 통계적으로 유의하게 청력소실이 더 크게 나타났다. 개발한 프로그램의 운용으로 방대한 청각검사자료를 이용하여 쉽게 노화에 따른 청력 변화에 대해 기준청력범위를 구할 수 있었고, 향후 노화성 난청의 재활이나 한국형 보청기 개발에 기초자료로 활용될 것으로 생각된다.

• 한국수자원학회논문집
• /
• 제40권6호
• /
• pp.447-458
• /
• 2007

본 연구에서는 해안 도시 하천의 범람으로 인한 홍수 재해 발생시 예상될 수 있는 피해에 대해 적절한 홍수예경보 및 피난대책을 수립하고자 대표적인 해안 도시 하천의 특성을 가지는 부산시 온천천 유역을 대상으로 수치지도에서 각종 지형자료를 추출하였고 수문 GIS 자료를 구축하였다. 강우 분석은 강우의 공간적 특성을 대상유역인 온천천에 티센망을 이용하여 고려하였으며 강우의 시간적 분포는 Huff의 2분위, 6차 회귀다항식을 이용하여 분석하였다. 홍수예경보 발령 기준을 설정하기 위하여 선정 지점 세 곳을 선택하여 위험수심을 선정하였다. 그리고, 하천 수리 분석을 위한 한계유출량 산정을 위해 HEC-RAS 모형을 이용 조위의 영향을 고려하여 홍수위 및 한계유출량을 산정하였고 도시 돌발 홍수 기준우량 산정을 위해 PCSWMM 2002를 이용하여 수문 분석을 실시하였다. 그 결과 온천천 유역의 홍수예경보 시스템과 이에 따른 홍수예경보 발령흐름도, 운영체계가 결정되었고 홍수예경보 발령 기준이 설정되었다. 본 연구를 통해 SWMM, HEC-RAS, ArcView GIS 모형을 연계하여 대상유역과 하도에 적용 통합적인 모의 기법을 제시하였으며 해안 도시 하천에서의 홍수 재해 발생시 이에 대한 대비책을 마련하게되었다. 앞으로 더욱 심도있게 연구하여 주요 해안 도시 하천에 대한 홍수예경보 시스템 구축이 절실히 요구된다.

• 한국재난정보학회 논문집
• /
• 제20권1호
• /
• pp.93-105
• /
• 2024

연구목적: 사업장 주변에 배출되는 화학물질의 양을 선정하여 대기확산 프로그램으로 농도를 예측하여 인근 주민들에게 영향을 정량적으로 파악하는 것을 목적으로 하였다. 연구방법: 연구물질의 선정은 반감기, 독성, 이용 가능한 측정소 자료의 유무를 고려하였다. 또한 연구대상물질에서 배출되는 지역을 연구대상 지역으로 선정하였으며, 유동인구가 있는 4개 지역을 선정하여 건강위해성을 평가하였다. 연구결과: AERMOD를 구동하기 위하여 지형 및 기상 처리를 실시 후 예측 농도를 구하였다. 위해성 평가 결과 어린이에서만 디클로로메탄이 초과되는 것으로 나타났으나, 테트라클로로에틸렌과 클로로포름은 어린이와 성인 모두 무시할 수 없는 수준으로 나타났다. 결론: 현재 국내 건강위해성평가는 "환경보건법"의 규정에 따라 위해지수가 일정 기준을 초과할 경우 위해성이 있는 것으로 간주된다. 향후 화학물질배출계획서 대상물질이 2030년에는 415종으로 확대되어 사업장에서 효율적인 관리가 필요함을 시사한다. 위해성 평가에서 위해성지수를 초과하는 경우 대기확산 모델링을 통해 배경농도와 예측농도를 고려하여 우선순위를 부여함으로써 화학물질 관리를 효과적으로 수행할 수 있을 것으로 판단된다.