• Journal of the Korean Society of Marine Environment & Safety
• /
• 제23권6호
• /
• pp.699-709
• /
• 2017

We measured the grain size, total organic carbon (TOC), total nitrogen (TN), and heavy metals (As, Cd, Cr, Cu, Fe, Hg, Mn, Pb, and Zn) in order to understand the spatial distribution and pollution level of organic matter and metals in surface sediment around Goseong Bay, a shellfish farming area, Korea. The surface sediments were composed of finer sediments such as mud and clay. The concentration of TOC, TN, and heavy metals were much higher in the innermost bay than in the mouth and outside of bay. The spatial distribution of organic matter and heavy metals and C/N ratio (5-10) in sediment showed that the organic matter and heavy metals in sediment of the study region were significantly influenced by oceanic origin organic matter and anthropogenic sources, respectively. Based on the results of four assessment techniques (sediment quality guideline, geoaccumulation index, pollution load index, ecological risk index), the sediments around the Goseong Bay were a little polluted for heavy metals and the high metal concentrations in the northern region of bay could adverse impact on benthic organisms in sediment. Thus, the systematic management plan for the improvement of water and sediment environment and the concentrated monitoring of pollutants for sustainable aquaculture and seafood safety around Goseong Bay are necessary in the future.

• Korean Journal of Ecology and Environment
• /
• 제55권3호
• /
• pp.185-200
• /
• 2022

The risk of various hazardous substances in aquatic environment comprises not only the concentration of substances in the environmental medium but also their accumulation in fish through complex food web and the health risks to humans through the fish. In Korea, the monitoring of residual toxicant in aquatic ecosystems began in 2016 following the enforcement of the Acts on registration and evaluation for the management of chemicals used in daily life (consumer chemical products), and attention has been paid to potentially hazardous substances attributed to them. Recently, studies have been carried out to investigate the distribution of these hazardous substances in the ecosystem and calculate their emission factors. These include the accumulation and transport of substances, such as detergents, dyes, fragrances, cosmetics, and disinfectants, within trophic levels. This study summarizes the results of recently published research on the inflow and distribution of hazardous substances from consumer chemical products to the aquatic environment and presents the scientific implication. Based on studies on aquatic environment monitoring techniques, this study suggests research directions for monitoring the residual concentration and distribution of harmful chemical substances in aquatic ecosystems. In particular, this study introduces the directions for research on trophic position analysis using compound specific isotope analysis and trophic magnification factors, which are needed to fulfill the contemporary requirements of selecting target fish based on the survey of major fish that inhabit domestic waters and assessment of associated health risk. In addition, this study provides suggestions for future biota monitoring and chemical research in Korea.

• Journal of Korean Society of Forest Science
• /
• 제106권4호
• /
• pp.509-517
• /
• 2017

This study was conducted to assess effect of thiacloprid fogging on non-target insect communities in Korean white pine forests. In addition, we assessed effect of thiacloprid fogging on mortality of Monochamus saltuarius as a vector of pine wood nematodes, and Apis mellifera as a non-target species. We compared abundance, species richness, and compostion of insects, and mortality of two insects among four treatment groups (control and thiacloprid-fogged groups with 3 different doses) located in the Kangwon National University Forest. For sampling of insects, 6 pitfall and 2 multi-funnel traps and 3 waterproof cloth sheets were placed in each study plot. In addition, M. saltuarius and A. mellifera were put into each meshed cage which installed at 7 m and 15 m heights in center of each study plot. Thiacloprid was fogged only once (middle May) in each plot using a fogging machine. Overall, thiacloprid fogging was appeared to be low toxicity to the abundance, species richness, and compostion of insects and mortality of A. mellifera, while it seems effectively impact on the mortality of M. saltuarius. However, thiacloprid fogging seems more influenced by microclimates in forests because the mortality of M. saltuarius in mesh cages was different according to heights and spatial locations. To control the population density and dispersal of M. saltuarius using by fogging techniques, therefore, it may be necessary to minimize the uncertainty about the effectiveness of thiacloprid fogging by improving the fogging techniques.

• Journal of Chest Surgery
• /
• 제39권12호
• /
• pp.920-926
• /
• 2006

Background: Mortality and morbidity of anastomotic complications after esophagectomy have gradually decreased in recent years. However, swallowing difficulties and reflux symptoms after esophagogastrostomy continue to be a burden jeopardizing the quality of life. In the present study, we evaluated the quality of esophagogastrostomy by analyzing anastomotic stenosis and reflux esophagitis. Material and Method: A retrospective analysis was made in 74 patients who underwent esophagogastrostomy after esophagectomy by one surgeon between January 1995 and December 2004. 53 patients of them received endoscopic examination during follow-up($29{\pm}23.6$ months, range $5{\sim}111$ months). Reflux esophagitis and stenosis at anastomostic site were analyzed according to the techniques and locations of esophagogastrostomy. Result: The median age at the time of repair was $60.3{\pm}8.87$ years(range $39{\sim}81$ years). 23 patients received a hand-sewn esophagogastric anastomosis and 30 patients a circular stapled one. There was no significant statistical difference in terms of anastomotic stenosis(p=0.64) and reflux esophagitis(p=0.41) between the two groups. Cervical anastomosis was peformed in 26 patients and intrathoracic anastomosis in 27 patients. No significant statistical difference in anastomotic stenosis between the two groups was found(p=0.44), but reflux esophagitis was noted in 3 patients in the cervical anastomosis group and 14 patients in the intrathoracic anastomosis group(p=0.003). Conclusion: Cervical anastomosis was supposed to have a better quality of esophagogastrostomy by lowering the risk of reflux esophagitis. In the future, the comprehensive study including a patient's subjective symptom and Barrett's metaplasia should be performed in larger cases.

• The Korean Journal of Pesticide Science
• /
• 제20권1호
• /
• pp.14-22
• /
• 2016

A trial of combining and quantifying the effects of food processing on various pesticides was carried out using a meta-analysis. In this study, weighted mean response ratios and confidence intervals about the reduction of pesticide residue levels in fruits and vegetables treated with various food processing techniques were calculated using a statistical tool of meta-analysis. The weighted mean response ratios for tap water washing, peeling, blanching (boiling) and oven drying were 0.52, 0.14, 0.34 and 0.46, respectively. Among the food processing methods, peeling showed the greatest effect on the reduction of pesticide residues. Pearsons's correlation coefficient (r=0.624) between weighted mean response ratios and octanolwater partition coefficients ($logP_{ow}$) for twelve pesticides processed with tap water washing was confirmed as having a positive correlation in the range of significance level of 0.05 (p=0.03). This means that a pesticide having the higher value of $logP_{ow}$ was observed as showing a higher weighted mean response ratio. These results could be used effectively as a reference data for processing factor in risk assessment and as an information for consumers on how to reduce pesticide residues in agricultural products.

• Journal of Plant Biotechnology
• /
• 제43권1호
• /
• pp.91-98
• /
• 2016

The growth area of living modified (LM) cotton has steadily increased every year, since its first commercialization in 1996. Development of environmental risk assessment tools and techniques for LM cotton is required for ecosystem safety. We therefore developed multiplex PCR assays for simultaneous detection of two (MON15985, MON531) and four (GHB614, LLCOTTON25, MON88913 and MON1445) LM cotton events approved in Korea, with event specific primer pairs. The PCR reactions were optimized by using event specific primers of six LM cottons at various concentrations. The reactions allows amplification of estimated amplicons of MON15985 (214 bp), MON531 (270 bp), GHB614 (119 bp), LLCOTTON25 (164 bp), MON88913 (276 bp), and MON1445 (389 bp) from multiplex PCR reactions. The multiplex PCR assay developed allowed that two annealing steps (15 cycles at $55^{\circ}C$ and 25 cycles at $60^{\circ}C$) were performed for amplification of distinguished two LM cottons, and only one annealing step (50 cycles at $60^{\circ}C$) was necessary for tetraplex PCR. Primer extension step of all PCR reactions was skipped for time-effective amplification. Our methods suggest that two multiplex PCR assays can be cost-effective and a rapid diagnostic tool for environmental LMO monitoring of six LM cottons.

• Korean Journal of Agricultural and Forest Meteorology
• /
• 제21권4호
• /
• pp.327-336
• /
• 2019

Soybean is one of the most important crops of which the grains contain high protein content and has been consumed in various forms of food. Soybean plants are generally cultivated on the field and their yield and quality are strongly affected by climate change. Recently, the abnormal climate conditions, including heat wave and heavy rainfall, frequently occurs which would increase the risk of the farm management. The real-time assessment techniques for quality and growth of soybean would reduce the losses of the crop in terms of quantity and quality. The objective of this work was to develop a simple model to estimate the growth of soybean plant using a multispectral sensor mounted on a rotor-wing unmanned aerial vehicle(UAV). The soybean growth model was developed by using simple linear regression analysis with three phenotypic data (fresh weight, dry weight, leaf area index) and two types of vegetation indices (VIs). It was found that the accuracy and precision of LAI model using GNDVI (R²= 0.789, RMSE=0.73 ㎡/㎡, RE=34.91%) was greater than those of the model using NDVI (R²= 0.587, RMSE=1.01 ㎡/㎡, RE=48.98%). The accuracy and precision based on the simple ratio indices were better than those based on the normalized vegetation indices, such as RRVI (R²= 0.760, RMSE=0.78 ㎡/㎡, RE=37.26%) and GRVI (R²= 0.828, RMSE=0.66 ㎡/㎡, RE=31.59%). The outcome of this study could aid the production of soybeans with high and uniform quality when a variable rate fertilization system is introduced to cope with the adverse climate conditions.

• Economic and Environmental Geology
• /
• 제56권3호
• /
• pp.311-330
• /
• 2023

Development of Carbon Capture and Storage (CCS) technique is becoming increasingly important as a method to mitigate the strengthening effects of global warming, generated from the unprecedented increase in released anthropogenic CO₂. In the recent years, the characteristics of basaltic rocks (i.e., large volume, high reactivity and surplus of cation components) have been recognized to be potentially favorable in facilitation of CCS; based on this, research on utilization of basaltic formations for underground CO₂ storage is currently ongoing in various fields. This study investigated the feasibility of underground storage of CO₂ in basalt, based on the examination of the CO₂ storage mechanisms in subsurface, assessment of basalt characteristics, and review of the global research on basaltic CO₂ storage. The global research examined were classified into experimental/modeling/field demonstration, based on the methods utilized. Experimental conditions used in research demonstrated temperatures ranging from 20 to 250 ℃, pressure ranging from 0.1 to 30 MPa, and the rock-fluid reaction time ranging from several hours to four years. Modeling research on basalt involved construction of models similar to the potential storage sites, with examination of changes in fluid dynamics and geochemical factors before and after CO₂-fluid injection. The investigation demonstrated that basalt has large potential for CO₂ storage, along with capacity for rapid mineralization reactions; these factors lessens the environmental constraints (i.e., temperature, pressure, and geological structures) generally required for CO₂ storage. The success of major field demonstration projects, the CarbFix project and the Wallula project, indicate that basalt is promising geological formation to facilitate CCS. However, usage of basalt as storage formation requires additional conditions which must be carefully considered - mineralization mechanism can vary significantly depending on factors such as the basalt composition and injection zone properties: for instance, precipitation of carbonate and silicate minerals can reduce the injectivity into the formation. In addition, there is a risk of polluting the subsurface environment due to the combination of pressure increase and induced rock-CO₂-fluid reactions upon injection. As dissolution of CO₂ into fluids is required prior to injection, monitoring techniques different from conventional methods are needed. Hence, in order to facilitate efficient and stable underground storage of CO₂ in basalt, it is necessary to select a suitable storage formation, accumulate various database of the field, and conduct systematic research utilizing experiments/modeling/field studies to develop comprehensive understanding of the potential storage site.