• 한국주조공학회지
• /
• 제27권2호
• /
• pp.88-94
• /
• 2007

General criteria for the risering design of steel castings and commercial codes for the flow and solidification analysis were used to design the optimized risering in V-process. Three type of specimens were chosen including thin plates and a thick disc. Sided riser installed in the front of a plate casting was effective to prevent the shrinkage defects and to increase the casting yield ratio. Exothennic sleeve and chill were also effective. It was possible to apply the general criteria for the risering design of steel castings to V-process. Temperature of a mold surface was expected to rise over $1,000^{\circ}C$ in the temperature calculation considering radiation effect of molten metal in the mold. Since weakening temperature of the vinyl used in V-process is about $70^{\circ}C$, it should be emphasized that a proper coating of the vinyl film is necessary to prevent the possibility of burning out of the vinyl by the molten metal.

• 한국항공우주학회지
• /
• 제40권8호
• /
• pp.726-736
• /
• 2012

본 논문은 KC-100 소형민항기의 스핀시험을 위해 장착될 스핀회복장치의 설계 및 지상활주 전개 시험에 대해 기술하였다. 스핀회복장치에 대한 상세 설계 단계에서 공력, 구조, 안정성, 조종성 등에 대한 해석적 결과를 토대로 낙하산 단위면적당 라이저 길이, 낙하산 다공성, 낙하산 펼침 시간, 및 전개방법 등의 설계 변수를 결정했다. 본 시스템의 검증을 위해 항공기에 스핀회복장치를 장착한 상태에서 기능점검 후 KC-100 고속활주 중 스핀슈트 전개를 수행했다.

• 한국주거학회논문집
• /
• 제18권5호
• /
• pp.45-52
• /
• 2007

The demographic profile of the households will shift towards the 'older elderly'. There are need upgrading existing housing and new housing in aspect of floor plan, accessories, facilities and so on. The government should prepare the policy and standards of housing design for the aged and disabled in order to improving the residents' housing conditions. The purpose of this study is to compare Korean to foreign guidelines related to residential design for the elderly and disabled and find out the characteristics of our standards. It was accomplished by literature research. The results were as follows. There is disagreements between domestic standards over the clear door opening, the clear hallways and handrails at entrance. And the foreign standards are based on their wheelchair size, ours are founded on it's size which specified only maximum overall dimensions. So ours are seem to be lack of accuracy. Our standard of stairs is in details in comparison with other space components. But ours don't go into details than foreign ones over length of hand-rails, riser etc. And for recommendations denoting minimum and maximum height of various component, it should be preceded the specific survey on limits of reaching ability for the elderly and disabled.

• 한국실내디자인학회논문집
• /
• 제24권3호
• /
• pp.38-47
• /
• 2015

This study evaluated non-liturgical space of catholic churches based on the four principles of universal design; accessible design, supportive design, safety-oriented design, and adaptable design. To design those spaces in terms of supportive design principle, diaper exchanging station needs to be placed in the restroom. Findings of this study are as follows: In terms of accessible design, valid width of entrance door to each room(more than 800mm), installation of elevator, height of riser in the stair, and width of step board were appropriate, but there were many spaces where door sils were not removed. In terms of supportive design, notice board at teacher's room and installation of storage closet, and width of passage to office(more than 1,200mm) were also appropriate, but storage closet at a meeting and prayer room, and space for storing flowers appeared inappropriate. To design those spaces in terms of supportive design principle, diaper exchanging station needs to be placed in the restroom. In terms of safety-oriented design, installation of round-edged furniture, use of non-slip flooring material, installation of safety emergency bell at a restroom, and installation of wall handle were required. In terms of adaptable design, space for wheelchair users at each room, installation of the furniture that can adjust the height, installation of desk with different height at an office, installation of toilet and basin considering children were considered to be necessary.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 춘계학술대회
• /
• pp.676-679
• /
• 2007

This paper describes an experiment facility to measure the circulation characteristics of a water/steam receiver at various heat fluxes. The natural circulation type receiver was considered in this study. The experiment facility was designed to satisfy circulation balance with an appropriate scale down. As a result, riser tube inner diameter was 7.4 mm and water circulation was 0.319 kg/s. Downcomer tube inner diameter by circulation balance was 9.52 mm and the quality was from 0 to 0.23.

• 한국해양공학회지
• /
• 제26권6호
• /
• pp.1-6
• /
• 2012

The purpose of this paper is to present a rational method for analyzing, designing, or evaluating the spread mooring systems used with floating drilling units. This paper presents a validated model to calculate the catenary static configuration. A semi-resolution approach is presented in this paper that is capable of predicting the static performance of a caisson mooring system. The solution is derived as a function of only three parameters, which can be solved numerically by implementing different kinds of boundary conditions. The efficiency and accuracy of the method permit quick parametric studies for the optimal selection of the system particle, which is undoubtedly useful for a preliminary design. A number of numerical examples demonstrate the validity of the adopted approach. The paper contains a complete description of the test cases and reports the results in such a way that it can provide a "benchmark" test for users and programmers of computer codes for flexible riser analysis.

• 태양에너지
• /
• 제18권4호
• /
• pp.59-66
• /
• 1998

It was compared with experimental data to verify TRNSYS Model of the thermosyphon hot water system and the various simulations were conducted to optimize the component parameters of the system. To obtain consistent simulation results the system model, which could accurately describ the thermal storage tank temperature stratification and the friction head for mass flow rate, was used. The optimization of collector parameters(collector aspect ratio, riser numbers per header unit length), thermal storage tank parameters(ratio of tank length to tank diameter, heat exchanger type), system parameters(ratio of tank volume to collector area) was simulated by TRNSYS program. The simulation results indicate that the system performance is more effected by collector aspect ratio and the ratio of tank volume to collector area than the othor parameters.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권8호
• /
• pp.454-460
• /
• 2004

The effects of surge arresters for protection of transmission systems against direct lightning strokes have already been reviewed using Electromagnetic Transients Program(EMTP). Distribution lines are spanned in much larger area than transmission lines, and therefore, are more susceptible to lightning strokes. We have modelled the 22.9kV underground distribution cable systems that have arresters and grounding wires. And this paper analyzes the overvoltages on underground distribution cable systems when direct lightning strokes strike on the overhead grounding wire using EMTP. Then we investigated that (1) the effects of lightning stroke according to underground distribution cable length (2) voltages at the riser pole and at the cable terminal according to installation of arrester. This study will provide insulation coordination methods for reasonable systems design in 22.9kV underground distribution cable systems.

• Design & Manufacturing
• /
• 제15권2호
• /
• pp.30-35
• /
• 2021

The casting method uses a mold to solidify a liquid metal to make a solid metal. Since it uses a liquid metal with the least deformation resistance, it has the characteristic that it can easily manufacture even a complex shape. However, the process of solidifying a liquid metal into a solid metal inevitably involves a volume change and contains internal defects such as shrinkage holes. Therefore, in the design of the casting plan, an excess volume called a pressurization compensates for the volume shrinkage. in the product, and it induces the shrinkage hole defects to occur in parts other than the product1). In this study, casting analysis was performed using casting analysis software (anycasting) in order to optimize the design of the tilting gravity casting method for automobile brackets. In particular, the filling and solidification analysis according to the shape and volume of the pressurized metal was conducted, and applied to the actual product to study the effect of the pressurized metal on the shrinkage defect. Through this study, it is possible to understand the effect of the pressure metal on shrinkage defects in the actual product and propose a design of the pressure metal that improves reliability and productivity.

• 한국전산유체공학회지
• /
• 제16권1호
• /
• pp.67-72
• /
• 2011

HRSG (Heat Recovery Steam Generator) is a boiler to recover heat from the exhaust gas of an engine and to generate steam for more power generation or process. For the HRSG, water-tube type boiler is commonly adopted to accommodate the working pressure or capacity requirement of the system. The water-tube type boiler has a steam drum to separate steam from the water-steam mixture supplied from the evaporator tube (riser). The drum should be sized properly to separate the steam by the gravity and auxiliary internals, such as a demister, which are installed to filter the steam. To size the steam drum and to estimate the filter efficiency of drum internals, the velocity distribution inside the drum needs to be identified. In the present study, a series of CFD has been conducted to find the velocity distributions inside steam drums for conventional HRSGs and water-tube type industrial boilers. The velocity distributions obtained from the simulation have been normalized and a correlation to predict them has been found. The correlation is applied to the steam drum design by determining a proper position of a demister to show proper separation performance.