• 국제초고층학회논문집
• /
• 제1권4호
• /
• pp.271-281
• /
• 2012

Tianjin Goldin Finance 117 tower has an architectural height of 597 m, total of 117 stories, and the coronation of having the highest structural roof of all the buildings under construction in China. Structural height-width ratio is approximately 9.5, exceeding the existing regulation code significantly. In order to satisfy earthquake and wind-resisting requirements, a structure consisting of a perimeter frame composed of mega composite columns, mega braces and transfer trusses and reinforced concrete core containing composite steel plate wall is adopted. Complemented by some of the new requirements from the latest Chinese building seismic design codes, design of the super high-rise building in high-intensity seismic area exhibits a number of new features and solutions to professional requirements in response spectrum selection, overall stiffness control, material and component type selection, seismic performance based design, mega-column design, anti-collapse and stability analysis as well as elastic-plastic time-history analysis. Furthermore, under the prerequisite of economic viability and a series of technical requirements prescribed by the expert review panel for high-rise buildings exceeding code limits, the design manages to overcome various structural challenges and realizes the intentions of the architect and the client.

• 대한기계학회논문집B
• /
• 제26권10호
• /
• pp.1427-1435
• /
• 2002

The main aim of the present article is numerically to investigate the micro-scale heat transfer phenomena in a silicon microstructure irradiated by picosecond-to-femtosecond ultra-short laser pulses. Carrier-lattice non-equilibrium phenomena are simulated with a self-consistent numerical model based on Boltzmann transport theory to obtain the spatial and temporal evolutions of the lattice temperature, the carrier number density and its temperature. Especially, an equilibration time, after which carrier and lattice are in equilibrium, is newly introduced to quantify the time duration of non-equilibrium state. Significant increase in carrier temperature is observed for a few picosecond pulse laser, while the lattice temperature rise is relatively small with decreasing laser pulse width. It is also found that the laser fluence significantly affects the N 3 decaying rate of Auger recombination, the carrier temperature exhibits two peaks as a function of time due to Auger heating as well as direct laser heating of the carriers, and finally both laser fluence and pulse width play an important role in controlling the duration time of non-equilibrium between carrier and lattice.

• Computers and Concrete
• /
• 제19권1호
• /
• pp.7-17
• /
• 2017

In Chinese Design Codes, for super high-rise buildings with complex structural distribution, which are regarded as code-exceeding buildings, elasto-plastic time history analysis is needed to validate the requirement of "no collapse under rare earthquake". In this paper, a 117-story super high-rise building is discussed. It has a height of 597 m and a height-width ratio of 9.5, which have both exceeded the limitations stipulated by the Chinese Design Codes. Mega columns adopted in this structure have cross section area of about $45m^2$ at the bottom, which is infrequent in practical projects. NosaCAD and Perform-3D, both widely used in nonlinear analyses, were chosen in this study, with which two model were established and analyzed, respectively. Elasto-plastic time history analysis was conducted to look into its seismic behavior, emphasizing on the stress state and deformation abilities under intensive seismic excitation.From the comparisons on the results under rare earthquake obtained from NosaCAD and Perform-3D, the overall responses such as roof displacement, inter story drift, base shear and damage pattern of the whole structure from each software show agreement to an extent. Besides, the deformation of the structure is below the limitation of the Chinese Codes, the time sequence and distribution of damages on core tubes are reasonable, and can dissipate certain inputted energy, which indicates that the structure can meet the requirement of "no collapse under rare earthquake".

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1297-1300
• /
• 2008

A conventional linear accelerator system requires a flat-topped pulse with less than ${\pm}$ 0.5% ripple to meet the beam energy spread requirements and to improve pulse efficiency of RF systems. A pulse transformer is one of main determinants on the output pulse voltage shape. The pulse transformer was investigated and analyzed with the pulse response characteristics using a simplified equivalent circuit model. The damping factor ${\sigma}$ must be >0.86 to limit the overshoot to less than 0.5% during the flat-top phase. The low leakage inductance and distributed capacitance are often limiting factors to obtain a fast rise time. These parameters are largely controlled by the physical geometry and winding configuration of the transformer. A rise time can be improved by reducing the number of turns, but it produces larger pulse droop and requires a larger core size. By tradeoffs among these parameters, the high-voltage pulse transformer with a pulse width of 10 ${\mu}s$, a rise time of 0.84 ${\mu}s$, and a pulse droop of 2.9% has been designed and fabricated to drive a klystron which has an output voltage of 284 kV, 30-MW peak and 60-kW average RF output power. This paper describes design optimization of a high-voltage pulse transformer for high-power pulsed applications. The experimental results were analyzed and compared with the design. The design and optimal tuning parameter of the system was identified using the model simulation.

• 문화기술의 융합
• /
• 제8권5호
• /
• pp.641-651
• /
• 2022

이 연구는 숙박시설이 있는 특정소방대상물 수용인원의 산정 방법에 따라 피난가능시간을 기준으로 피난시뮬레이션을 실시하여 고시원 화재 발생 시 계단 폭의 변화에 따른 피난소요시간을 비교·분석하였다. 현재 숙박시설로 분류하는 고시원(바닥면적 합계 500m² 이상)은 소방시설법, 건축법, 주차장법이 정하는 맹점을 이용, 적은 면적의 대지 위에 고층으로 건축물을 신축하여, 적지 않은 양의 호실을 만들어 대다수의 고시원이 학생과 고시생을 위한 곳이 아닌 변형된 숙박시설의 형태로 변질되어가고 있다. 이는 건축주의 영업이익에 부합하므로 지속적인 증가 추세를 보일 것으로 예상된다. 고시원 피난 시간의 골든타임 확보는 우리 사회의 경제적 약자에 속하는 고시원 재실자의 최후의 보루로 본 연구가 사회적 안전망 구축을 위한 관계법령의 개정 논의에 시발점이 되길 바라며, 피난시뮬레이션 분석의 결과 피난훈련이 실행된 집단과 피난계단의 폭을 200cm로 확장한 경우에 피난소요시간이 가장 적게 나타났으며, 기존 건물의 계단 폭의 변화 없이 피난시뮬레이션을 실시한 피난소요시간이 648.4초와 시나리오 6을 비교하면 최대166.3초가 단축되는 결과를 보였다. 이와 같은 분석 결과를 통하여 고시원의 피난안전성 개선을 위해 피난계단의 폭을 다중이용업소의 안전관리에 관한 특별법의 안전시설 등 종류에 추가하여 관련 법령의 개정에 활용할 수 있는 근거를 마련했다는 점에서 의의가 있다.

• Korean Journal of Geomatics
• /
• 제3권1호
• /
• pp.73-79
• /
• 2003

To manage national territory and cadastral data efficiently, accuracy and cost-efficiency in cadastral boundary surveying is inevitable. The efficient management of cadastral data is a very important element in national land management. Survey techniques are being introduced. Recently, improvements in survey techniques have been made with the development of satellite surveying, Allowing accurate and fast surveys. If we can calculate the output accurately in real-time in survey fields, it will open a new method in cadastral detail surveying. According to the classification on Law of cadastral surveying, Cadastral surveying can be divided into cadastral control point surveying and cadastral detail surveying. The control point survey can be divided into cadastral triangulation surveying and cadastral traverse surveying. The detailed survey is usually perform by plane surveying. Among these, cadastral detail surveying will be reviewed in this study. In this study, the combination of the satellites, such as US managed GPS and Russian managed GLONASS was used. In the satellite survey in downtown, data interruption symptoms arose(according to the mask angle of the satellite). Therefore; we combined the satellites to get date more accurately. A block of Haewoondae New City in Busan, Korea, which has Numerical Cadastral Law was selected as the sample area for this study. Block II and III are surrounded by high rise apartments. One side of Block I and IV is level ground and the other side is full of high rise apartments. Especially, Block II is surrounded by high rise apartment houses with 20 meters width. In the results of the study Block II did not satisfy the allowable precision, while Block I, II and IV satisfied the allowable precision of the enforcement regulations of Cadastral Law. Therefore, it is judged that the traditionally used Total Station method should be used for supplementary survey on Block II, in stead.

• 한국수자원학회논문집
• /
• 제46권6호
• /
• pp.597-611
• /
• 2013

본 연구에서는 Clark 모형의 시간-면적곡선의 구성 방법과 적용성을 검토하고 모멘트 원리에 의한 도달시간, 저류상수를 합리적으로 산정하기 위한 방법론을 고찰해 보았다. 격자 기반으로 폭 함수를 구성하고 운동과정을 순수 이류현상으로 가정하여 시간-면적곡선으로 사용하였다. 또한 도달시간과 저류상수는 모멘트 법의 원리에 따라 Clark 모형 구조에 적용하여 해석적으로 산정할 수 있는 방법을 제시하였다. 적용성 검토를 위해 (1) HEC-1에서 기본적으로 제공하는 좌우 대칭형상인 무차원 시간-면적곡선을 적용하고 매개변수 산정은 관측유출수문곡선과 계산된 유출수문곡선의 오차를 최소화하는 HEC-1의 최적화 기법 사용, (2) HEC-1에 폭 함수 기반의 시간-면적곡선을 적용하고 매개변수 산정은 HEC-1의 최적화 기법 사용, (3) 폭 함수 기반의 시간-면적곡선을 이용하여 모멘트 원리에 따라 매개변수를 직접 산정하는 방법을 적용하였다. 방법별로 산정된 Clark 모형의 매개변수들을 HEC-1을 이용하여 직접유출량을 산정하고 관측 직접유출량과 비교하여 얻은 결과는 다음과 같다. (1) 정량적으로 비교하기 위해 산정한 첨두유량과 첨두발생 시간의 상대오차 및 효율계수 E(Efficiency Coefficient)를 비교한 결과, 시간-면적곡선을 폭 함수로 대체하여 HEC-1으로부터 추정된 매개변수가 관측값을 잘 반영하였다. (2) Clark 모형의 올바른 적용을 위해서는 HEC-1에서 기본적으로 제공하는 좌우 대칭형상인 무차원 시간-면적곡선보다는 적용 대상유역의 배수구조가 적절하게 반영된 시간-면적곡선의 사용이 합리적일 것으로 판단된다. (3) 본 연구 방법은 첨두유량과 첨두시간의 상대오차 범위와 재현정도를 나타내는 효율계수를 비교하여 볼 때 대체로 양호하게 모의되었고, 대상유역별 유량측정성과인 하천평균유속과 비교했을 때 본 연구 방법이 다소 실제 유속에 접근하고 있음을 확인하였다. (4) 본 연구에서 모멘트 원리를 기반으로 제안한 매개변수 추정을 위한 방법은 유역의 이류현상과 저류현상을 정량적으로 계량할 수 있는 효율적인 관계식으로 사용할 수 있음을 확인하였다. (5) 본 방법에 의해 계산된 수문곡선이 대부분 관측수문곡선의 우측으로 왜곡되고 첨두유량은 과소평가 되는 것을 보이고 있다. 이것은 평균과 분산만을 고려하여 유역을 하나의 평균이송속도로 모의한 본 연구의 한계점으로 판단된다. 만약 모멘트의 왜곡도를 고려하고 유역을 지표면과 하천으로 나누어 평균이송속도를 모의한다면 물리적인 특성을 충분히 반영하여 매개변수를 추정 할 수 있을 것으로 판단된다.

• 대한전자공학회논문지
• /
• 제25권5호
• /
• pp.509-521
• /
• 1988

In the designs of integrated circuits, the buffer circuits used for driving a large capacitive load from minimum-structured logic circuit outputs have important effects upon system throughputs. Therefore it is important to optimize the buffer circuits. In this paper, the principle of designing CMOS buffer circuits which have the minimum delay and drive the given capacitive load is discussed. That is, the effects of load capacitance upon rise time, fall time, and delay of the CMOS inverter and the effects of parasitic capacitances are finely analysed to calculate the requested minimum-delay CMOS buffer condition. This is different from the method by C.A. Mead et. al.[2.3.4.]which deals with passive-load-nMOS buffers. Large channel width MOS transistor stages are necessary to drive a large capacitive load. The effects of polysilicon gate resistances of such large stages upon delay are also analysed.And, the area of buffer circuits designed by the proposed method is smaller than that of buffer circuits designed by C.A. Mead's method.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권5호
• /
• pp.190-197
• /
• 2005

A reliable and compact pulse power supply using a thyratron and a magnetic pulse compression (MPC) circuit was developed for a metal vapor laser. The life time of the pulse power supply is expected to be much longer than that of a conventional thyratron-discharge type pulse power supply. A thyratron generated a long pulse of its conduction pulse width 500 ns and then it was compressed to less than 80 ns of its output voltage rise time by a three stage MPC circuit. This pulse power supply was applied to a laser plasma tube of 30 mm inner diameter and 1.5 m discharge length. It was operated several hundreds hours without any troubles.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권5호
• /
• pp.268-272
• /
• 2004

A high voltage pulse generator with a rotator airhole spark gap instead of a rotary ball spark gap has been proposed and investigated. Its feasibility as a high voltage pulse generator is compared with the rotary ball spark gap type one. Parametric studies showed that proposed the rotary airhole type spark gap had a very stable breakdown voltage and reliable pulse repetition time compared with the conventional rotary ball type spark gap. This however showed that the proposed pulse generator with a rotary airhole spark gap instead of a rotary ball spark gap could be potentially used as a very stable and reliable pulse generator in the various fields of applications.