• 전력전자학회논문지
• /
• 제13권1호
• /
• pp.46-54
• /
• 2008

본 논문에서는 연료전지나 배터리 및 슈퍼커패시터 등의 전기화학적 전력기기의 임피던스 모델링에 적합한 저가의 임피던스 분광 시스템을 설계하고 구현하였다. 제안된 시스템은 간단한 센서회로 및 상용 DAQ(Data Acquisition) Board와 강력한 HMI(Human-Machine Interface)를 지원하는 그래픽 언어인 LabVIEW 소프트웨어를 이용하여 구성되었고 고가의 EIS(Electrochemical Impedance Spectroscopy) 장비를 대체하여 널리 사용될 수 있을 것으로 기대된다. 또한, 제안된 시스템에서는 Lock-in Amplifier를 이용함으로써 노이즈(Noise)가 많은 환경에서도 측정 주파수 성분의 정확한 측정이 가능하게 하였다. 제안된 시스템을 이용하여 Ballard Nexa 1.2kW PEM 연료전지 스택의 주파수별 임피던스를 측정하였고, 이를 바탕으로 한 등가 임피던스 모델도 제안된다. 제시된 모델과 개발된 장비의 유용함은 리플전류에 의한 연료전지 스택의 교류 손실 측정을 통해 증명된다.

• Journal of Power Electronics
• /
• 제13권3호
• /
• pp.369-380
• /
• 2013

Direct torque control based on space vector modulation (SVM-DTC) protects the DTC transient merits. Furthermore, it creates better quality steady-state performance in a wide speed range. The modified method of DTC using SVM improves the electrical magnitudes of asynchronous machines, such as minimizing the stator current distortions, the stator flux with electromagnetic torque without ripple, the fast response of the rotor speed, and the constant switching frequency. In this paper, the proposed method is based on two new control strategies for direct torque control with space vector modulation. First, fuzzy logic control is used instead of the PI torque and a PI flux controller to minimizing the torque error and to achieve a constant switching frequency. The voltages in the direct and quadratic reference frame ($V_d$, $V_q$) are achieved by fuzzy logic control. In this scheme, the switching capability of the inverter is fully utilized, which improves the system performance. Second, the close loop of stator flux estimation based on the voltage model and a low pass filter is used to counteract the drawbacks in the open loop of the stator flux such as the problems saturation and dc drift. The response of this new control strategy is compared with DTC-SVM. The experimental and simulation results demonstrate that the proposed control topology outperforms the conventional DTC-SVM in terms of system robustness and eliminating the bad outcome of dc-offset.

• 한국산학기술학회논문지
• /
• 제21권1호
• /
• pp.277-283
• /
• 2020

기계식 기어의 치를 영구자석으로 대체한 동심 마그네틱 기어에서 원주방향을 따라 놓인 모든 자석이 동력 전달에 관여하므로 감속비를 결정하는 자석의 극수비는 마그네틱 기어의 거동 특성에 큰 영향을 미친다. 본 논문에서는 극수비를 변화시켜가며 마그네틱 기어에서 생성되는 전달토크의 밀도, 동손을 고려한 토크의 효율, 코깅 특성을 포함한 토크의 품질 등을 유한요소 해석을 이용하여 비교 분석하였다. 구동측의 극수를 2극에서 5극까지 변화시킬 때 전달토크가 최대가 되는 최적의 극수비가 존재함을 확인하였으며 이는 모듈레이터를 통한 구동측 자기장의 필터링 성분에 직접적인 영향을 받다. 전달 효율 역시 와전류 생성 밀도와 자기장간에 비례특성이 있으므로 전달 토크 밀도와 유사한 경향을 나타내는 것을 알 수 있으며 낮은 기어비에서는 95% 이상의 효율을 보인다. 제한된 극수를 갖는 영구자석의 상호작용에 기인하는 코깅 특성은 일반적인 동기 모터에서와 같이 구동측 자석의 개수와 모듈레이터 치의 개수간의 최소공배수에 반비례하는 것을 확인할 수 있었다. 전달 토크 평가를 위해 실제 시험 모델이 제작되었고 실증시험이 진행되었다.

• Journal of Power Electronics
• /
• 제13권6호
• /
• pp.939-954
• /
• 2013

The Direct Torque Control (DTC) technique for Permanent Magnet Synchronous Motors (PMSM) is receiving increased attention due to its simplicity and robust dynamic response when compared with other control techniques. The classical switching table based DTC results in large flux and torque ripples in the motors. Several studies have been reported in the literature on classical DTC. However, there are only limited studies that actually discuss or evaluate the classical DTC. This paper proposes, novel switching table / DTC methods for PMSMs to reduce torque ripples. In this paper, two DTC schemes are proposed. The six sector and twelve sector methodology is considered in DTC scheme I and DTC scheme II, respectively. In both DTC schemes a simple modification is made to the classical DTC structure. The two level inverter available in the classical DTC is eliminated by replacing it with a three level Neutral Point Clamped (NPC) inverter. To further improve the performance of the proposed DTC scheme I, the available 27 voltage vectors are allowed to form different groups of voltage vectors such as Large - Zero (LZ), Medium - Zero (MZ) and Small - Zero (SZ), where as in DTC scheme II, all of the voltage vectors are considered to form a switching table. Based on these groups, a novel switching table is proposed. The proposed DTC schemes are comparatively investigated with the classical DTC and existing literatures through theory analysis and computer simulations. The superiority of the proposed DTC method is also confirmed by experimental results. It can be observed that the proposed techniques can significantly reduces the torque ripples and improves the quality of current waveform when compared with traditional and existing methods.

• 전기학회논문지
• /
• 제65권2호
• /
• pp.304-310
• /
• 2016

This paper proposes a fault diagnosis method for an open-fault in inverter driving five-phase induction motor. The five-phase induction motor has a high output torque and small torque ripple in comparison to three-phase. The best advantage of the five-phase induction motor is fault diagnosis and tolerant control using redundancy of phases. This paper uses an inverter as a power converter for driving a five-phase induction motor. If a switch of inverter occurs to the open-fault, this problem is the influence on the output current and output torque. To solve this problem, there is need of an accurate diagnosis and fault switch distinction. Therefore, this paper propose a fault detection method of the open-fault switches for the fault diagnosis. First, analyzing the pattern for the open-circuit fault of one phase. next, analyzing the pattern for the open-circuit fault of each inverter switches. Through the pattern analysis, It defines the scope of each of the failure switch. Thereafter, By using an algorithm that proposes to perform a fault diagnosis method. The proposed algorithm is verified from the experiment with the 1.5 kW five-phase induction motor.

• 전기전자학회논문지
• /
• 제23권3호
• /
• pp.1061-1067
• /
• 2019

본 논문에서는 PTWS 방식을 이용한 고집적화된 AMOLED용 3-채널 DC-DC 변환기의 설계한다. 양의 전압 $V_{POS}$는 경부하에서 효율을 제고하기 위해 SPWM 듀얼모드와 PTWS 방식을 적용한 부스트 변환기로 설계한다. 음의 전압 $V_{NEG}$는 전력 손실을 줄이기 위해 PSM 방식을 적용한 0.5x 인버팅 차지펌프를 이용해 설계하고, 추가적인 전압 $V_{AVDD}$는 LDO를 이용하여 설계한다. 제안된 DC-DC 변환기는 $0.18{\mu}m$ BCDMOS 공정을 사용하여 시뮬레이션을 한 결과 부하전류 1mA~70mA에서 전력효율 56.9%~90.2%를 가지고, 양의 전압 $V_{POS}$에서 최대 5mV의 출력 리플을 가졌다.

• 디지털융복합연구
• /
• 제19권3호
• /
• pp.161-166
• /
• 2021

거시경제는 한 나라의 경제 전반의 움직임을 나타내는 개념으로 경제주체인 기업, 정부, 가계경제 활동 전반에 영향을 미친다. 거시경제는 국민소득, 물가, 실업, 통화, 금리, 원자재 등의 변화를 살펴보면 경제 주체들의 행위와 상호작업이 제품과 서비스의 가격에 영향을 파악할 수 있다. 미국연방준비제도(FED)는 코로나 경제침체를 극복하기 위한 다양한 경기부양책을 내 놓으며, 세계경제를 이끌고 있다. 현재 코로나로 인한 주가가 2020년3월20일에 지속적으로 하락하였지만, FED의 강력한 경지부양책인 양적완화로 미국의 S&P500지수는 3월 23일이후 반등을 시작해 12월 15일 3,694.62까지 회복에 성공했다. 따라서 주가의 예측을 기업의 재무제표로 판단하는 것이 아니라 거시경제지표에 따른 FED의 경기부양책이 더 영향을 미치고 있는 실정이다. 따라서 본 연구는 FED의 경기부양책과 주가에 미치는 영향을 분석하여 주식투자에 손실을 줄이고 건전한 투자 정착을 위해 본 연구를 진행하였다.

• Nuclear Engineering and Technology
• /
• 제19권2호
• /
• pp.115-121
• /
• 1987

SNU 1.5MV 직렬형 반데그라프 가속기의 고전압 안정화 계통을 설치하여 그 동작 특성을 파악하고 최적화하였다. 이온빔 수송계통의 최적 운전 조건을 단계적인 실험을 통하여 결정하였으며 적절한 운전 조건하에 표적함에서 350nA의 가속된 양성자빔을 얻었다. 고전압을 안정화하지 않았을 때의 고전압 변동은 이온빔을 가속하지 않을 때와 가속할 때 각각 $\Delta$V/V=5.2$\times$$10^{-3}$, 7.2$\times$$10^{-3}$이었으며 그 변동 주파수는 3Hz 이하였다. 터미날 전압 247.3kV에서 고전압 안정화 계통의 최적 운전을 통하여 터미날 전압의 변동은 $\Delta$V/V=2.45$\times$$10^{-4}$ 으로 줄었고 에너지 안정도는 $\Delta$E/E=2.44$\times$$10^{-4}$ 으로 유지되었으며 이 때의 안정화 계수는 29.4였다.

• Journal of Power Electronics
• /
• 제11권4호
• /
• pp.408-417
• /
• 2011

The plug-in hybrid electric vehicles (PHEVs) are specialized hybrid electric vehicles that have the potential to obtain enough energy for average daily commuting from batteries. The PHEV battery would be recharged from the power grid at home or at work and would thus allow for a reduction in the overall fuel consumption. This paper proposes an integrated power electronics interface for PHEVs, which consists of a novel Eight-Switch Inverter (ESI) and an interleaved DC/DC converter, in order to reduce the cost, the mass and the size of the power electronics unit (PEU) with high performance at any operating mode. In the proposed configuration, a novel Eight-Switch Inverter (ESI) is able to function as a bidirectional single-phase AC/DC battery charger/ vehicle to grid (V2G) and to transfer electrical energy between the DC-link (connected to the battery) and the electric traction system as DC/AC inverter. In addition, a bidirectional-interleaved DC/DC converter with dual-loop controller is proposed for interfacing the ESI to a low-voltage battery pack in order to minimize the ripple of the battery current and to improve the efficiency of the DC system with lower inductor size. To validate the performance of the proposed configuration, the indirect field-oriented control (IFOC) based on particle swarm optimization (PSO) is proposed to optimize the efficiency of the AC drive system in PHEVs. The maximum efficiency of the motor is obtained by the evaluation of optimal rotor flux at any operating point, where the PSO is applied to evaluate the optimal flux. Moreover, an improved AC/DC controller based Proportional-Resonant Control (PRC) is proposed in order to reduce the THD of the input current in charger/V2G modes. The proposed configuration is analyzed and its performance is validated using simulated results obtained in MATLAB/ SIMULINK. Furthermore, it is experimentally validated with results obtained from the prototypes that have been developed and built in the laboratory based on TMS320F2808 DSP.

• 패션비즈니스
• /
• 제14권4호
• /
• pp.91-101
• /
• 2010

This paper has the purpose of suggesting a development-method on the fashion products that would secure the competitiveness in the global markets through creating supersensitive practical products on the basis of developing originative fashion-goods being made of jacquard that is fine quality of couture. This paper has collected data through the cases of the developed nations in fashion, precedent studies and all the related literature on the subject. The results of this researching are as following: The first, it is expected that the necessity of developing new fashion products would be appealed toward the prestige group of consumers who are seeking for the fine quality and super-sensitivity in female fashion in Korea, and it is the current situation that the products made of jacquard are gradually expanding not only in the area of apparel, fashion goods and interior but also another areas. The current situation of the global market suggests the necessary strategy of survival, that is, the development of supersensitive materials and creative products which would be able to keep the high quality and lower the selling price through cost reduction. The second, the suggestion of the direction in developing the products of the female fashion made of jacquard has two points - the development of the texture that would realize a unique form and the development of the material that would be able to realize planar pattern and three dimensional pattern which are woven with thin and light materials with various solidity and delicacy through various techniques of mixing and three dimensional expression. The third, the expected ripple effect and utilization generated from the development of fashion products are as followings: As material characteristics of jacquard, It needs the specialization of various techniques and specialized production system in using jacquard, and the specialized technique and system would make it possible to produce not only the higher value-added products through expressing affluent colors and delicate design but also competitive products through cutting the process and cost, eventually, it would lead to the expansion of the jacquard market of super-sensitive prestige. Therefore, it is remarkable that various development of products toward the global market and the prestige female fashion market can suggest the vision that make the national fashion industry develop into the higher value-added knowledge industry integrating technology and culture.