• Journal of Surface Science and Engineering
• /
• v.52 no.3
• /
• pp.130-137
• /
• 2019

In this study, the cobalt sulfide (CoS) nanosheet on stainless steel as a supercapacitor electrode is synthesized by using a facile successive ionic layer adsorption reaction (SILAR) method. The number of cycles for dipping and rinsing can control the nanosheet thickness of CoS on stainless steel. Field emission-scanning electron microscopy (FE-SEM) showed a layer structure of CoS particles coupled as agglomeration. And x-ray diffraction (XRD) showed the crystallinity of the CoS nanosheet. To investigate the characteristics of the CoS nanosheet electrode as the supercapacitor, analysis of electrochemical measurement was conducted. Finally, the CoS nanosheet of 70cycles on stainless steel shows the specific capacitance ($44.25mF/cm^2$ at $0.25mA/cm^2$) with electrochemical stability of 78.5% over during 2000cycles.

• Nuclear Engineering and Technology
• /
• v.51 no.3
• /
• pp.877-883
• /
• 2019

Superconducting multi-spoke cavities are outstanding alternative choice for acceleration of heavy ions in medium velocity regimes. Based on the scheme of China ADS, several researches on the superconducting double-spoke cavities were done and two prototype cavities have been developed. In this paper, the RF design, the mechanical design and fabrication considerations of the bare cavity will be described in detail. After Buffered Chemical Polishing and High Pressure Rinsing, one of the prototype cavities was installed into the Vertical Test Stand for high gradient RF testing at 4.2 K. The measurement results of the quality factor as a function of the accelerating field and the maximum surface field will be presented. An accelerating gradient of more than 15 MV/m is achieved during the test, with maximum surface electric field of 58 MV/m, and maximum surface magnetic field of 117 mT.

• Journal of the Korean Burn Society
• /
• v.22 no.2
• /
• pp.34-37
• /
• 2019

Fires in operating rooms rarely occur. However, this type of disaster can complicate almost any surgical procedure. Fuel, heat and oxygen are related with fire outbreak. When ignition sources such as alcohol-based surgical preparation solutions are present, the risk of an operating room fire increases, and burns are more severe in such conditions. Many manufacturers recommend waiting at least three minutes after application to allow complete drying for reduce fire risk. There are a few studies regarding flame burns in the operation room, although most of these studies are related to preoperative skin preparation. However, alcohol containing solutions can be used occasionally for cleansing of the operation field after the surgery, therefore, the surgical team should pay attention to surgical fires, even if they have completed the operation successfully. We present our case of a post-operative flame burn and introduce some precautions that will reduce the risk of alcohol burns.

• Clean Technology
• /
• v.7 no.4
• /
• pp.225-242
• /
• 2001

Cleaning process is necessary for machining parts or manufacturing finished products in the industry. Most of domestic and foreign companies are now trying to adopt environment-friendly aqueous cleaning agents instead of CFC-113 and 1,1,1-TCE which are ozone-depleting substances. However, the aqueous cleaning system has a disadvantage due to its generation of lots of waste water since the system utilizes water in cleaning and rinsing processes. Thus, it is very important that monitoring and recycling technologies of the cleaning solution and the rinse water should be introduced in the aqueous cleaning system in order to minimize generation of waste water and to maintain its cleaning performance for a quite long time. In this paper, the cleaning agents utilized in the aqueous cleaning system and cutting oils which are main contaminants were examined and analyzed. And the monitoring and recycling technologies of the aqueous cleaning system which can be employed in the industrial fields were also reviewed and evaluated.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.6
• /
• pp.659-664
• /
• 2011

Staphylococcus aureus (SA) bacteremia is associated with high mortality, and often results in metastatic infections. The methicillin-resistant SA (MRSA) is an urgent health care issue, as nosocomial infections with these bacteria represent limited treatment alternatives. Samples of whole blood containing challenge inoculums of SA and MRSA strains were passed through columns packed with surfaceheparinized polyethylene beads. The bound bacteria were eluted and quantitatively determined by culturing and by real-time PCR. Significant amounts of both SA and MRSA adhered to the heparinized beads (more than 65% of inoculated bacteria). After rinsing with buffer at high ionic strength, viable bacteria or bacterial DNA were eluted from the columns, indicating that the binding was specific. The conclusions that can be made from these experiments are that, as earlier reported in the literature, the high affinity of SA to heparin is retained in whole blood, and MRSA in whole blood binds to heparin with similar or higher affinity than SA. It should be possible to lower the amount of SA and/or MRSA from the blood of infected patients to levels that could be taken care of by the immune system. In previous studies, we have shown that passing blood from septic patients over beads coated with end-point-attached, biologically active heparin is a useful technique for regulating the levels of heparinbinding cytokine. These findings in combination with the present findings indicate the possibility of creating an apheresis technology for treatment of sepsis caused by SA and/or MRSA.

• Korean Journal of Human Ecology
• /
• v.6 no.1
• /
• pp.27-34
• /
• 2003

We investigated the bacterial and chemical retting conditions of ramie grown in Hansan. Bacterial retting was done in troughs at a temperature of 30${\pm}$2$^{\circ}C$ for 1, 2, 3, 4, 5, 6 and 10 days. Chemical retting(CR) was done at the different conditions using sodium silicate (Na$_2$SiO$_3$), sodium carbonate(Na$_2$CO$_3$) and sodium hydroxide(NaOH) as alkali solutions. The retting solution was boiled during 1. 2, 4 and 6 hours respectively at the different concentration(0.5, 2.0, 4.0, 6.0. 8.0 %) with decorticated ramie stems submerged in it. The treated ramie was then rinsing with running tap water thoroughly, which was further soaker in 0.5% acetic acid (v/v) solution for three minutes and washed thoroughly with distilled water. Finally ramie was dried for 2 hours in vacuum oven at 100 $^{\circ}C$. To know change of ramie fiber characteristics retted at the different conditions, weight loss, fiber bundle strength were tested and color, texture, luster etc. were also sensually evaluated. The results were as follows. $.$ Weight loss of ramie retted in each alkali solutions were about 10%, 20% and 30% in sodium silicate, sodium carbonate and sodium hydroxide, respectively. $.$ Chemical retting was faster than bacterial retting, but the color of chemically retted ramies were worse than that of bacterially retted ramies. $.$ The combination of bacterial and chemical processing showed some merits. A combination of either 2 or 3 days of bacterial and then chemical retting might provide the best quality ramie. $.$ Ramie fiber became cottonized ramie when retted in 8% NaOH solution for 6-8hours.

• Journal of Digital Convergence
• /
• v.14 no.10
• /
• pp.367-373
• /
• 2016

The aim of this study was to evaluate the anti-caries effect of the essential oils and chlorhexidine mouth rinse. 42 subjects were randomized allocated to the chlorhexidine (n=22) and essential oils group (n=20). Subjects were instructed to rinsing each mouthwash by 15 ml once a day during the 7 days. The CRT and Cariview scores were recorded at baseline and 4 weeks after treatment. Data was analysed by using PASW 18.0 program with independent t-test and paired t-test. After 1 month, Cariview score was shown reducing compare to baseline. However, there were no significant differences between the groups. High risk level of MS and LB was decreased to 9~15% after treatment in two groups. Both of the chlorhexidine and essential oils mouth wash showed an antiplaque effect. Although chlorhexidine continues to be the "gold standard" in terms of antiplaque effect, essential oils could be considered a reliable alternative antimicrobial agent.

• Analytical Science and Technology
• /
• v.7 no.1
• /
• pp.115-124
• /
• 1994

The corroded surface of cold rolled steel sheet in the process of rinsing after alkali-cleaning was examined by means of X-ray Photoelectron Spectroscopy(XPS). In addition, the surface-treated cold rolled steel with 0.05wt% $Na_5P_3O_{10}$ solution for the purpose of preventing the corrosion was examined by means of XPS and the results were compared with those for the non-treated cold rolled steel. It was found that the corroded surface consists of $Fe_2O_3$, FeO and $Fe(OH)_3$ and the thickness of the oxide layer is about $1500{\AA}$. On the other hand, in the case of surface-treated cold rolled steel, the phosphate layer of $60{\AA}$ thickness was found to act as a protective film over the relatively thin Fe oxide layer.

• Journal of the Korean Society of School Health
• /
• v.17 no.2
• /
• pp.11-22
• /
• 2004

Purpose: The aim of this study was to evaluate the effects of oral health care programs in 3 school-based oral health care center among primary schoolchildren. Methods: School-based oral health care programs included fluoride mouth rinsing, pit and fissure sealing for permanent premolars and molars, fluoride gel application and chewing of xylitol candy. All of the programs were carried out by one dental hygienist among 'D' primary schoolchildren in Daegu city under the supervision of a dentist. Baseline dental examinations were completed and preventive care was implemented for 544 children during one year. All of the children visited a school-based oral health care center every three months for a regular check-up. The final oral examination was conducted from March 15 to April 1, 2004. The data analysis data was made on the basis of SAS 8.01. Mean differences between 2003 and 2004 data were compared by paired t-test. Corresponding p-values were considered significant at values less than 0.05. Results: The DMF rate and DFT index were reduced to 8.0% and 8.4% during one year respectively, but there were no statistically significant differences. The DMF rate was significantly reduced (16.3%) after a one year program of school-based oral health care practice. The DMFT(Decay Missing Filling Tooth) index was also reduced compared to 2003 throughout the entire grade. Conclusion: School-based oral health care programs can reduce the prevalence of dental caries prevalence among schoolchildren during one year. This program also improved the oral health capacity of schoolchildren. It is recommend that the school-based oral health care program should be extended to every primary school in Korea.

• Journal of the Korean Society of Fashion and Beauty
• /
• v.4 no.3 s.9
• /
• pp.13-17
• /
• 2006

Perm is one the of the most common thing in a beauty salon like hair-cut and hair perm needs processing solutions which is chemical substances. Those chemical substances damage the hair cuticle. Damaged hair cuticles with mistakes of perm will follow with the next performance and it will cause more damage to hair. As damage of hair cuticle become worse, it is harder to recover the hair cuticle like before. Therefore, this study shows that plain rinse is the way to reduce the damage of hair cuticle with perm as much as possible. With experiments, I suggest the right way to do plain rinse to satisfy customers' demand and reduce the damage. During the research, I figured that plain rinse with the knowledge, structure of hair cuticle, principle of perm and plain rinse, is very needed. The hair with plain rinse have more elastic curl and have less scales which came off from hair cuticle than the hair without plain rinse. This experiment concludes that hairdresser has to figure out about the time, temperature and type of water depends on the degree of damaged hair of customers. In order to perm, there is no way to not to use chemical substances to perm. Therefore, hairdresser has to choose suitable processing solutions and right steps, and as this is the age of 'well-being' boom, hairdresser must try to keep the healthy hair. Consequently, in order to meet the demands and conditions of customers, hairdresser needs to find the right method to do plain rinse and use the method in perm.