• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.9
• /
• pp.1759-1771
• /
• 1994

We proposed the iterative image restoration method based on the method of steepest descent with a regularization constraint for restoring the noisy motion-blurred images. The conventional method proposed by Jan Biemond et al, had drawback to amplify the additive noise and make ringing effects in the restored images by determining the value of regularization parameter experimentally from the degraded image to be restored without considering local information of the restored one. The method we proposed had a merit to suppress the noise amplification and restoration error by using the regularization parameter which estimate the value of it adaptively from each pixels of the image being restored in order to reduce the noise amplification and ringing effects efficiently. Also we proposed the termination rule to stop the iteration automatically when restored results approach into or diverse from the original solution in satisfaction. Through the experiments, proposed method showed better result not only in a MSE of 196 and 453 but also in the suppression of the noise amplification in the flat region compared with those proposed by Jan Biemond et al. of which MSE of 216 and 467 respectively when we used 'Lean' and 'Jaguar' images as original images.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.2B no.3
• /
• pp.115-124
• /
• 2002

This paper presents an active auxiliary edge-resonant DC link snubber with a ringing surge damper and a three-phase voltage source type zero voltage soft-switching inverter with the resonat snubber treated here for the AC servo motor driver applications. The operation of the active auxiliary edge-resonant DC link snubber circuit with PWM voltage is described, together with the practical design method to select its circuit parameters. The three-phase voltage source type soft-switching inverter with a single edge-resonant DC link snubber treated here is evaluated and discussed for the small-scale permanent magnet (PM) type-AC servo motor driver from an experimental point of view. In addition to these, the AC motor stator current and its motor speed response for the proposed three-phase soft-switching inverter employing Intelligent Power Module(IPM) based on IGBTS are compared with those of the conventional three-phase hard-switching inverter using IPM. The practical effectiveness of the three-phase soft-switching inverter-fed permanent magnet type AC motor speed tracking servo driver is proven on the basis of the common mode current in a novel type three-phase soft-switching inverter-fed AC motor side and the conductive noise on the mains terminal interface voltage as compared with those of the conventional three-phase hard-switching inverter-fed permanent magnet type AC servo motor driver for the speed tracking applications.

• Journal of Broadcast Engineering
• /
• v.7 no.4
• /
• pp.327-334
• /
• 2002

This paper addresses an efficient loop filter algorithm to improve visual quality by simultaneously reducing blocking and ringing artifacts in H.26L video coder. H.26L video coding standard using the different coding mechanism to existing video coding standards has different distribution of blocking and ringing artifacts that is dependent on coding type, quantization step size, and motion vector. Therefore, the information is used to define the filter type and the filter coefficients. and a projection operator is defined to avoid the over-smoothness. In addition, in order to avoid over-smoothing coming from filtering processing, a constraint projection operator is defined. Since the above information is available both in encoder and in the decoder, a loop filter is used, and the algorithm is simplified to reduce the computational cost. Experimental results show the capability of the proposed algorithm.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.3
• /
• pp.54-62
• /
• 2007

The knock characteristics in an engine were investigated under homogeneous charge compression ignition (HCCI) operation. Liquefied petroleum gas (LPG)and gasoline were used as fuels and injected at the intake port using port fuel injection equipment. Di-methyl ether (DME) was used as an ignition promoter and was injected directly into the cylinder near compression top dead center (TDC). A commercial variable valve timing device was used to control the volumetric efficiency and the amount of internal residual gas. Different intake valve timingsand fuel injection amounts were tested to verify the knock characteristics of the HCCI engine. The ringing intensity (RI) was used to define the intensity of knock according to the operating conditions. The RI of the LPG HCCI engine was lower than that of the gasoline HCCI engine at every experimental condition. The indicated mean effective pressure (IMEP) dropped when the RI was over 0.5 MW/m2and the maximum combustion pressure was over 6.5MPa. There was no significant relationship between RI and fuel type. The RI can be predicted by the crank angle degree (CAD) at 50 CA. Carbon monoxide (CO) and hydrocarbon (HC) emissions were minimized at high RI conditions. The shortest burn duration under low RI was effective in achieving low HC and CO emissions.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.13 no.2
• /
• pp.127-134
• /
• 2005

This paper introduces a newly developed high speed material testing apparatus for tensile tests at the strain rate up to 500/sec. The tensile properties of sheet metals are indispensable for the accurate crashworthiness analysis of auto-bodies since the local strain rate reaches to 500/sec in the car crash. An appropriate experimental method has to be developed to acquire the tensile properties at the intermediate strain rate ranged from 0.003/sec to 200/sec. Tensile tests of various different steel sheets for an auto-body were perform ed to obtain the dynamic properties with respect to the strain rate. The dimensions of specimens that can provide the reasonable results were determined by the finite element analysis. A special jig fixture of a load cell is designed to reduce the load ringing phenomenon induced by unstable stress propagation at the high strain rate. Stress-strain curves were acquired for each steel sheet from the dynamic tensile test and utilized to obtain the relationship of the stress to the strain rate.

• The Journal of the Korea Contents Association
• /
• v.11 no.5
• /
• pp.15-24
• /
• 2011

Recently various anatomic researches by using serially sectioned images in VK(Visible Korean) project are in progress. In that sense, it is very important and necessary to represent images which keep information of the original anatomic images. In this regard, there are some studies to get rid of slice patterns in coronal and sagittal images. However, according to the rapid spatial frequency changes, the ringing effect occurred in common. In addition, because of merge with the original images which have splice patterns, those patterns appeared again. Therefore, in this study we found effective color space to apply to FFT(Fast Fourier Transform) and notch filter in getting rid of the slice patterns. To verify this, we used RGB, LAB, CMYK, HSV and HSL color space. Secondly we got rid of and alleviated the ringing effect by improving notch filter. To verify this, we compared proposed method with previous study on the basis of original images by visual method and objective values. These result images are expected to contribute to anatomy research in relation to VK project.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.1
• /
• pp.22-27
• /
• 2014

Blocking and ringing artifacts continue to be the most serious defects that occur in images and video streams compressed to low bit rates using block-based discrete cosine transform(DCT) compression standards. These artifacts contain the high frequency components near the block and the edge boundaries. Usually the lowpass filter can remove them. However, simple lowpass filter results into blur by removing important information such as edges at the same time. To overcome these problems, we propose a novel postfiltering algorithm that calculate the weight value based on the intensity similarity in the neighboring pixels and multiply this weight to the Gaussian lowpass filter coefficient. Experimental results show that the proposed technique provides satisfactory performance in both objective and subjective image quality.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.930-933
• /
• 2011

This paper addresses an adaptive postprocessing method applied in the spatial domain for block-based discrete cosine transform (BDCT) coded images. The proposed algorithm is designed by a serial concatenation of a 1D simple smoothing filter and a 2D directional filter. The 1D smoothing filter is applied according to the block type, which is determined by an adaptive threshold. It depends on local statistical properties, and updates block types appropriately by a simple rule, which affects the performance of deblocking processes. In addition, the 2D directional filter is introduced to suppress the ringing effects at the sharp edges and the block discontinuities while preserving true edges and textural information. Comprehensive experiments indicate that the proposed algorithm outperforms many deblocking methods in the literature, in terms of PSNR and subjective visual quality evaluated by GBIM.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2007.05a
• /
• pp.137.2-137.2
• /
• 2007

• Proceedings of the KIEE Conference
• /
• 1979.08a
• /
• pp.164-165
• /
• 1979

Two dimensional kernels which reconstruct the tomographic image from the blurred one formed by simple back-projection are investigated and their performances are compared. These kernels are derived from tile point spread function of the tomographic system and have the form of a ramp filter modified by several window functions to suppress ringing in the reconstruction. Computer simulation using a computer generated phantom image data with different correction functions(kernels) has been carried out. In this simulation, filtering in frequency domain by 2-D FFT technique or in space domain by 2-D direct convolution is considered. It is found that the-computation time required for real space convolution technique is much larger than that of Fourier 2-D filtering technique in the pratical situation.