• Journal of the Optical Society of Korea
• /
• 제19권6호
• /
• pp.643-648
• /
• 2015

By comparing the results calculated by atan() and atan2() functions, the correctly estimated region of isoclinic phase map is determined using morphological techniques. The isoclinic phase map is automatically unwrapped in the true phase range -π/2 to π/2. Demonstrations of the method on a disc and a ring under diametral compression are performed. Test results compare well with the theoretical results. Furthermore, the influences of principal stress direction and the range of isoclinic phase upon stress separation are discussed.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2008년도 동계학술발표회 논문집
• /
• pp.141-142
• /
• 2008

In order to develop a simple ray tracing model for simulating the radiation pattern of a LED, the propagation of a ray within the LED capsule was systematically evaluated by considering refraction and reflection from the capsule-air interface, multiple reflection within the capsule, and total internal reflection at the boundary. It was found that concentric ring shapes on the radiation pattern was formed by the rays multiple-reflected from the capsule surface, and that the strength of these rays were decreased rapidly as the number of multiple reflection is increased.

• 대한기계학회논문집A
• /
• 제28권1호
• /
• pp.85-91
• /
• 2004

The sapphire wafers for blue light emitting devices were manufactured by the implementation of the surface machining technology based on micro-tribology. This process has been performed by chemical and mechanical polishing process. The sapphire crystalline wafers were characterized by double crystal X-ray diffraction. The sample quality of sapphire crystalline wafer at surfaces has a full width at half maximum of 89 arcsec. The surfaces of sapphire wafer were mechanically affected by residual stress during the polishing process. The wave pattern of optical interference of sapphire wafer implies higher abrasion rate in the edge of the wafer than its center from the Newton's ring.

• 통합자연과학논문집
• /
• 제2권2호
• /
• pp.65-68
• /
• 2009

Siloles of considerable current interest, both because of their unusual electronic properties and because of their possible application as electron-transporting materials in devices such as light-emitting diodes (LED's) and chemical sensor. Siloles have been characterized by NMR, FT-IR, and UV-vis absorption spectroscopy. Their optical characteristics have been also investigated using photoluminescence spectroscopy. Thus siloles exhibit a low reduction potential and a low-lying LUMO energy level, attributed to ${\sigma}^*-{\pi}^*$ conjugation arising from the interaction between the ${\sigma}^*$ orbital of the sigma-bonded silicon atom and the $\pi^*$ orbital of the butadiene moiety of the ring.

• 호남수학학술지
• /
• 제42권3호
• /
• pp.511-520
• /
• 2020

A module M is called cofinitely closed weak δ-supplemented (briefly δ-ccws-module) if for any cofinite closed submodule N of M has a weak δ-supplement in M. In this paper we investigate the basic properties of δ-ccws modules. In the light of this study, we can list the main facts obtained as following: (1) Any cofinite closed direct summand of a δ-ccws module is also a δ-ccws module; (2) Let R be a left δ-V -ring. Then R is a δ-ccws module iff R is a ccws-module iff R is extending; (3) Any nonsingular homomorphic image of a δ-ccws-module is also a δ-ccws-module; (4) We characterize nonsingular δ-V -rings in which all nonsingular modules are δ-ccws.

• 전기의세계
• /
• 제25권2호
• /
• pp.55-57
• /
• 1976

자동차에서 발전기는 engine의 기계적 energy를 전기 energy로 변환시켜 engine의 발동, light, radio및 여러가지 계기등에 전류를 공급하며 잉여전력을 축전지에 저장한다. 이러한 자동차용 발전기는 1900년 중반기까지 직류발전기를 사용하였으나 1960년 초기부터 반도체개발과 더불어 저속출력특성이 우수한 교류발전기와 정류기를 병용하였다. 그러나 1960년 하반기부터는 자동차의 고속화, 차내의 라디오, TV시설, 각종 전자제어장치등의 급속한 발달로 보다 안정도가 높은 전원의 공급이 필요하게 되었다. 또한 자동차사용이 일반화됨에 따라 최소의 유지보수를 요하는 발전기를 추구하게 되었다. 이에 따라 미국, 영국, 불란서 등 선진공업국에서는 브러시가 필요없는 발전기의 개발을 서두르게 되었으며 여러가지 형태의 Brushless generator를 개발하여 현재 사용하고 있다. 종래의 발전기에서 Brush와 slip-ring, 즉 금속의 회전마찰접촉을 통하여 계자권선에 전류가 공급됨으로 이에 따른 성능저하, 접촉부분에서 발생하는 arc로 인한 폭발위험 및 전자장치에 주는 방해, Brush 마모로 인한 유지보수등의 단점을 주고 있다.

• Journal of the Optical Society of Korea
• /
• 제17권5호
• /
• pp.392-398
• /
• 2013

As the essential techniques for the CD (Critical Dimension) measurement of the LCD pattern, there are various modules such as an optics design, auto-focus [1-4], and precise edge detection. Since the operation of image enhancement to improve the CD measurement repeatability, a ring type of the reflected lighting optics is devised. It has a simpler structure than the transmission light optics, but it delivers the same output. The edge detection is the most essential function of the CD measurements. The CD measurement is a vital inspection for LCDs [5-6] and semiconductors [7-8] to improve the production yield rate, there are numbers of techniques to measure the CD. So in this study, a new subpixel algorithm is developed through facet modeling, which complements the previous sub-pixel edge detection algorithm. Currently this CD measurement system is being used in LCD manufacturing systems for repeatability of less than 30 nm.

• Bulletin of the Korean Chemical Society
• /
• 제22권7호
• /
• pp.727-731
• /
• 2001

Conjugated-non-conjugated alternating block copolymers containing distyrylarylene units were synthesized via Wittig reaction for chemiluminescent fluorophores. The polymers were differentiated from others by the presence of aromatic unit in the chromophoric block. When UV-VIS, photoluminescence and chemiluminescence spectra of these materials were compared with copolymers, a strong bathochromic effect was observed. A more pronounced red shift and higher chemiluminscence efficiency were observed in the polymer with anthracene ring. Sodium salicylate-catalyzed reaction of bis(2-carbopentyloxy-3,5,6-trichlorophenyl) oxalate with hydrogen peroxide produced a strong chemiluminescence from blue to yellow-green light emission with wavelength of 450-537 nm in the presence of the fluorophore. The chemiluminescent intensity decayed exponentially. The glow of chemiluminescence maintained more than l2 hr and was visible with the naked eye.

• 한국광학회지
• /
• 제13권1호
• /
• pp.15-20
• /
• 2002

고리형 반도체 광섬유 레이저에서 외부의 별도 펌프광 없이 4광파 혼합에 의해 파장을 가변할 수 있는 시스템을 구현하였다. -8 dBm의 10 GHz 초단펄스를 입력 신호 광원으로 인가하여 반도체 광증폭기의 이득 대역폭내에서 하향 30 nm및 상향 17 nm에 이르는 연속적인 파장변환을 성공시켰다. 구현된 변환기는 광대역 파장변환 뿐만아니라, 고속 변환 및 낮은 포화 신호전력 특성을 보임을 입증하였다.

• 대한의용생체공학회:의공학회지
• /
• 제33권4호
• /
• pp.169-176
• /
• 2012

Tumor cell morphology is closely related to its migratory behaviors. An active tumor cell has a highly irregular shape, whereas a spherical cell is inactive. Thus, quantitative analysis of cell features is crucial to determine tumor malignancy or to test the efficacy of anticancer treatment. We use 3D time-lapse phase-contrast microscopy to analyze single cell morphology because it enables to observe long-term activity of living cells without photobleaching and phototoxicity, which is common in other fluorescence-labeled microscopy. Despite this advantage, there are image-level drawbacks to phase-contrast microscopy, such as local light effect and contrast interference ring. Therefore, we first corrected for non-uniform illumination artifacts and then we use intensity distribution information to detect cell boundary. In phase contrast microscopy image, cell is normally appeared as dark region surrounded by bright halo ring. Due to halo artifact is minimal around the cell body and has non-symmetric diffusion pattern, we calculate cross sectional plane which intersects center of each cell and orthogonal to first principal axis. Then, we extract dark cell region by analyzing intensity profile curve considering local bright peak as halo area. Finally, we calculated the Fourier descriptor that morphological characteristics of cell to classify tumor cells into active and inactive groups. We validated classification accuracy by comparing our findings with manually obtained results.