• 전기전자학회논문지
• /
• 제24권2호
• /
• pp.446-452
• /
• 2020

본 논문에서는 실외용 움직임 감지에 적합한 K대역 마이크로파 움직임 감지 센서를 활용한 에너지 절감형 LED 모듈을 제안하였다. 헤어핀 형태의 마이크로스트립 공진기를 이용한 발진기를 설계하여 안정성을 높이고 제작이 쉽도록 하였다. 신호의 방사를 위해 송수신 2채널 패치 배열 안테나를 개발하여 적용하였다. 수신된 신호로부터 도플러 천이 값을 획득하기 위해 윌킨슨 전력분배기 및 링 하이브리드 혼합기를 개발하여 적용하였다. 신호의 안정성 및 원치 않는 외부잡음으로부터 보호하기 위해 쉴드 캔을 제작하여 장착하였다. 제안된 움직임 감지 센서를 실증용 LED 모듈에 장착하여 에너지 절감 성능을 모의실험을 통하여 검증하였다.

• 통합자연과학논문집
• /
• 제11권2호
• /
• pp.93-100
• /
• 2018

Caspases, a family of cysteinyl aspartate-specific proteases plays a central role in the regulation and the execution of apoptotic cell death. Caspase-3 has been proven to be an effective target for reducing the amount of cellular and tissue damage because the activation of caspases-3 stimulates a signalling pathway that ultimately leads to the death of the cell. In this study, Hologram based Quantitative Structure Activity Relationship (HQSAR) models was generated on a series of Caspase-3 inhibitors named 3, 4-dihydropyrimidoindolones derivatives. The best HQSAR model was obtained using atoms, bonds, and hydrogen atoms (A/B/H) as fragment distinction parameter using hologram length 61 and 3 components with fragment size of minimum 5 and maximum 8. Significant cross-validated correlation coefficient ($q^2=0.684$) and non cross-validated correlation coefficients ($r^2=0.754$) were obtained. The model was then used to evaluate the eight external test compounds and its $r^2_{pred}$ was found to be 0.559. Contribution map show that presence of pyrrolidine sulfonamide ring and its bulkier substituent's makes big contributions for improving the biological activities of the compounds.

• 한국소음진동공학회논문집
• /
• 제23권3호
• /
• pp.234-239
• /
• 2013

There are many types of speed reducer for industrial uses. However the cycloid speed reducer is widely used in manipulators based on excellent performance of low backlash, high reduction ratio and compact size. It is essential to use precision speed reducer for accuracy of position controls on robot systems and electric vehicles. The cycloid speed reducer has a eccentric rotating motion and offset to avoid some problem of assembly, so it has a disadvantage for vibration. In this paper, a multi-body dynamic model is developed for a cycloid speed reducer and the dynamic behaviors of the reducer are investigated. The cycloid speed reducer consists of cycloidal plate gears, housing gear, input shaft, output pin and shaft, and eccentric bearings. Using a CAD program, each component of cycloid reducer is modeled based on the offset and eccentric. Multi-body simulations using Recurdyn and test using a rig tester are performed. As a result, the pin reaction force and the amplitude of housing displacement are increased by the larger offset and smaller eccentric value of cycloid reducer.

• 전자공학회논문지A
• /
• 제33A권11호
• /
• pp.1-9
• /
• 1996

In the following paper, new architectural algorithm of clock and data recovery circuit is proposed for 622.08 Mbps optical communication receiver. New algorithm makes use of charge pump PLL using voltage controlled ring oscillator and extracts 8-channel 77.76 MHz clock signals, which are delayed by i/8 (i=1,2, ...8), to convert and recover 8-channel parallel data from 662.08 Mbps MRZ serial data. This circuit includes clock genration block to produce clock signals continuously even if input data doesn't exist. And synchronization of data and clock is doen by the method which compares 1/2 bit delayed onput data and decided dta by extracted clock signals. Thus, we can stabilize frequency and phase of clock signal even if input data is distorted or doesn't exist and simplify receiver architecture compared to traditional receiver's. Also it is possible ot realize clock extraction, data decision and conversion simulataneously. Verification of this algorithm is executed by DESIGN CENTER (version 6.1) using test models which are modelized by analog behavior modeling and digital circuit model, modified to process input frequency sufficiently, in SPICE.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.765-770
• /
• 2000

Hot-wire measurements are reported on the developing turbulent flows subject to plane rate of strain in a rotating $90^{\circ}$ dog bend. The cross-section of the bend varies from $100mm{\times}50mm$ rectangular shape at the bend inlet gradually to the $50mm{\times}100mm$ shape at the bend outlet with remaining a constant area. Data signals from the rotating test section are transmitted through a slip ring to the personal computer which is located at the outside of the rotating disc. 3-dimensional velocity and 6 Reynolds stress components were calculated from the equations which correlate the fluctuating and mean voltage values measured with rotating a slant type hot-wire into 6 orientations. The effects of Coriolis and centrifugal forces on the mean motions and turbulence structures are investigated with respect to rotational speed.

• 한국분무공학회지
• /
• 제11권3호
• /
• pp.176-189
• /
• 2006

In the present study, capability of improving the liquid atomization of a high-speed liquid jet by using wall impingement is explored, and its application to a jet engine atomize. is demonstrated. Water is injected from a thin nozzle. The liquid jet impinges on a wall positioned close to the nozzle exit, forming a liquid film. The liquid film velocity and the SMD were measured with PDA and LDSA, respectively. It was shown that the SMD of the droplets was determined by the liquid film velocity and impingement angle, regardless of the injection pressure or impingement wall diameter. When the liquid film velocity was smaller than 300m/s, a smaller SMD was obtained, compared with a simple free jet. This wall impingement technique was applied to a conventional air-blasting nozzle for jet engines. A real-size air-blasting burner was installed in a test rig in which three thin holes were made to accommodate liquid injection toward the intermediate ring, as an impingement wall. The air velocity was varied from 41 to 92m/s, and the liquid injection pressure was varied from 0.5 to 7.5 MPa. Combining wall impinging pressure atomization with gas-blasting produces remarkable improvement in atomization, which is contributed by the droplets produced in the pressure atomization mode. Comparison with the previous formulation for conventional gas-blasting atomization is also made, and the effectiveness of utilizing pressure atomization with wall impingement is shown.

• 한국강구조학회 논문집
• /
• 제9권4호통권33호
• /
• pp.611-623
• /
• 1997

연직하중을 받는 콘크리트충전 원형강관기둥 외다이아프램 접합부의 거동을 파악하고자 실험을 통하여 그 내력을 평가하고 각 변수에 따른 영향도를 분석하였다. 이를 위해 다층골조의 보-기둥을 실물크기 1/4규모로 모델화시켜 총 20개의 실험체를 제작하였으며 스티프너 보강유무, 스티프너 폭, 강관두께, 강관과 스티프너의 용접유무 등을 주요변수로 두어 본 연구를 수행하였다.

• Journal of Welding and Joining
• /
• 제12권3호
• /
• pp.109-117
• /
• 1994

Spot welding has wide used with a high work efficiency in the automotive and aerospace industries. Up to the present, the technique mainly used to test spot welds on production lines has been entirely depended upon destructive chisel or peel testing. Therefore, it's being very important assignment to secure the NDE technique which can be evaluate spot weld quality with more efficiency and high reliability. This paper discusses the feasibility of UNDE techniques to evaluate spot weld quality. For the sake of the approach to the quantitative measurement of nugget diameter and the discrimination of a the corona bond from nugget, ultrasonic c-scan image and distribution of reflective echo amplitude was measured by immersion method with the mechanical and the electronic scanning of point-focussed ultrasonic beam(25 MHz). As the results of this study, corona bond which is the most dangerous types of interface defects can be successfully detected, as well as expulsion and voids. Ultrasonic testing results were confirmed and compared by optical microscope and SAM(Scanning Acoustic Microscope) observation of the spot-weld cross section. The results show that the nugget diameter can be successfully measured with the accuracy of 0.8 mm.

• 대한물리의학회지
• /
• 제8권2호
• /
• pp.163-173
• /
• 2013

PURPOSE: This study determined the effect of balance control therapy in the brain activation. METHODS: Twenty-two college students who showed decrease of muscle strength in O-ring test were as participants in this study. And the subjects were randomly divided into experimental group (n=13) and control group (n=9). Measurement device is portable EEG (Nihonkhoden, Japan). Examinations used twenty electrodes attached to the head to capture electrical brain signals during 5 minutes with brain activated states such as the awaked state and the data were compared between the two groups. RESULTS: After treatment by balance control therapy, P3 (p<.025) and P4 areas (p<.025) showed a significantly lower ST index in the experimental group than the control group, The variation of ST index in P4 area (p<.025) was decreased in the experimental group but was increased in the control group. CONCLUSION: These results showed that the balance control therapy was helpful to change the brain activation such as the stress (ST) index at the sensory area in the college students.

• 한국연초학회지
• /
• 제20권2호
• /
• pp.218-224
• /
• 1998

Long-term exposure of cigarette smoke or air pollutants to human can induce damages in the airway mucociliary function and can be closely related to the irritation and sputum formation in the respiratory system. This study was undertaken to investigate whether rat trachea can be used as a tool for evaluating the cigarette smoke quality. It was identified that, through the examination with inverted microscope, ciliary beating in 1 mm long cut of nat trachea ring was continued for at least 48 hours in saline solution at $25^{\circ}C$. The ciliostasis time in a KCN solution as a positive control was decreased with increasing the concentration of KCN. There were no significant differences in the ciliostasis time by body weight and individual variation of rats. Ciliotoxicity of whole smoke trapped in saline was not significantly changed by aging for more than 6 hrs. The ciliostasis time was in inverse proportion to the number of sample cigarettes applied. As moisture in the cigarette was increased, ciliostasis time was linearly increased. Therefore, these data indicate that the ciliotoxicity test using rat trachea in vitro can be applied to evaluate the cigarette smoke quality and to search factors for the irritation and sputum formation by cigarette smoke as well as air pollutants.