• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.117-120
• /
• 2002

This paper is to develop the sensing system for opening-force measurement such as O-Ring muscular meridian. We designed to overcome the functional limit that the conventional force-sensor can measure just the closing-force. Therefore, the new sensor can meet a variety of application as well as O-Ring test. The structure of the new sensor is an actuator-type system using an electromagnet. That is made up of mechanical system, electromagnet, current transformer and computer interface circuit. Driving software and user interface program of the new sensor system also is explained in this paper.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.6
• /
• pp.1510-1519
• /
• 1994

It is important to understand the friction characteristics between piston-ring assembly and cylinder wall for the friction loss reduction as well as the solution of problem such as scuffing wear and oil consumption. A new system was developed for the piston-ring assembly friction force measurement. This system was applied to the friction force measurement to find its functional relationship with variables such as engine speed, oil viscosity, and engine load. The friction mean effective pressure(fmep) was found to have a linear relationship with$(\vpsilon{U})^{0.42}$ under motering and with$(\vpsilon{U})^{0.45}$ under firing operations, where $\vpsilon$ is the kinematic oil viscosity and U is mean piston speed.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.33 no.2
• /
• pp.94-103
• /
• 1991

This study was carried out to investigate the engineering characteristics of the R.C circular ring sector plate with various boundary conditions and then to propose a rational and paraical method for application of finite element method to R.C structures. The stiffness matrix of the circular ring sector plate was obtained by using the multi-base coordinate system in which the base-coordinate systems were constructed for each nodal point of the quadrilateral element in order to reflect the complicated boundary conditions conveniently and correctly. The R.C element stiffness matrix was constructed by adding the stiffness coefficients of the steel-bar element into the plate bending element stiffness matrix. Herein, the steel-bar element was treated as the common beam element. Using the above method, the effects of steel-bar can be considered without increasing of the numbers of element and nodal points.

• Structural Engineering and Mechanics
• /
• v.29 no.5
• /
• pp.581-597
• /
• 2008

In this paper, the double displacement coupled statics and dynamics of the electromechanical integrated electrostatic harmonic drive are developed. The linearization of the nonlinear dynamic equations is completed. Based on natural frequency and mode function, the double displacement coupled forced response of the drive system to voltage excitation are obtained. Changes of the forced response along with the system parameters are investigated. The voltage excitation can cause the radial and tangent coupled forced responses of the flexible ring. The flexible ring radius, ring thickness and clearance between the ring and stator have obvious influences on the double displacement coupled forced responses.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.1 no.1
• /
• pp.79-84
• /
• 1991

We construct one-way function based on a finite ring. One-way function in this paper means that to find the inverse of the function is hard computationally. We have used the extension of group action to construct this function and applied it to encipher the given plain text. To decipher the enciphered text generated by this function is considerd\ed a hard problem. but not impossible theoretically. However, a successful enciphering system. for example, RSA system which depends on the difficulty of factoring, need not have mathematically perfectness.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.697-700
• /
• 2021

In this paper, a study was conducted on a technology that can improve and maintation the performance of a pump by using carbon composite liner ring for pump. The bigges weakness of mechanical deviced in rotational motion is vibration. We developed monitoring system on vibration, it will give convernience and conducted to user's 'pump with improved liner ring and monitoring system' is confirmed that pump's efficiecny performance is excellent to existing pump and maintenance.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.4
• /
• pp.351-356
• /
• 2009

A dual-mode annular ring antenna for both global positioning system(GPS) and satellite digital multimedia broad-casting(DMB) is designed. The proposed antenna consists of a coupling feed line and four slots on the annular ring patch. The gap between the feed line and the annular ring patch is used for an input impedance matching, and the slot length is used for adjusting the resonant frequency of the $TM_{21}$ mode at the DMB frequency. The antenna was fabricated and measured. The experimental results show that the antenna resonants at the GPS and DMB frequencies with suitable bandwidths, and had a broadside radiation pattern at the GPS band and a conical beam radiation pattern at the DMB band.

• Proceedings of the KIEE Conference
• /
• 2001.07e
• /
• pp.30-32
• /
• 2001

Thomson's jumping ring was first exhibited by Elihu Thomson in 1887 and modified to include the floating variation by John A. Fleming in 1890. This vivid demonstration of electromagnetic induction is still used in physics classrooms to illustrate Faraday's and Lenz's laws and is the basis for linear actuators for sorvo-mechanical purpose as well as induction heating and rail guns. The jumping ring apparatus of the type described in this study is used to demonstrate and educate the effects of electromagnetic induction. To verify control algorithm, a sensor system and a data control/measurement system is required. The sensor system consist of photo-interrupted and encode circuit which is designed to take voltage according to the position of ring.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2001.11a
• /
• pp.15-18
• /
• 2001

In this paper, we investigate the rotordynamic characteristics of turbopump system for 9.5ton thrust liquid rocket engine. A finite element method is used to analyze the vibratior characteristics of a rotor-bearing system. The turbopump rotating system is modeled by shaft with sixty elements, nine rigid disks, four ball bearings and four floating ring seals. The calculation results show that the margin of 1st critical speed is increased from 12% to 68% by use of elastic damping ring. In addition, the margin of the 2nd critical speed near the operating speed is increased from 30% to 63% by the stiffness and damping of floating ring seals.

• Korean Journal of Crystallography
• /
• v.1 no.1
• /
• pp.14-18
• /
• 1990

Econazole nitrate, 1-{2-[(4-chlorophenyl)methoxy]-2-(2,4-dichlorophenyl) ethy1}-1H-imidazole mono-nitrate.C18 H16 CI13 N3 O4 Mw=444.7 Monoclinic P/2₁c,a=17.337(4)A, b=15.191(5), c=7.601(3)A, β=91.72(2)', V=2000.9A3, Z=4, Dc=1.49g/cm3, Dm=1.45g/cm3(mo-ka)= 0.7107A, μ=4.31cm-1, F(000)=912.0, T=298'K, final R=0.061 for 1330 unique observed reflection. Each of the three ring system for the stars with B,A and C ring in order whilst A and C ring of econazole lie close to the same plane which is nearly 60˚with B ring. The hydrogen binding nitrogen of C ring and oxygen of nitrate contributes to stailization of econazole nitrate. Intr and intermolecular distances and angles are within the values recorded for simiar compounds.