• Journal of electromagnetic engineering and science
• /
• 제13권4호
• /
• pp.259-262
• /
• 2013

This paper analyzes the effects of metamaterial slabs with negative permeability when applied to a two-loop wireless power transmission (WPT) system, both in theory and electromagnetic (EM) simulations. The analysis of magnetic flux focusing provided here assumes quasi-magnetostatics or magnetostatics. The slab structures with negative permeability have been realized using the periodically arrayed ring resonators (RRs) at 13.36MHz. Some examples with ideal lossless slabs of -1, -2, and -3 showed a great enhancement of WPT efficiencies when compared with the free space cases. However, practical lossy slabs made of planar copper RRs did not show significant enhancement of WPT efficiencies due to the relatively high losses in the ring resonator (or in the slab consisting of RRs) near the resonant frequency.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1546-1548
• /
• 1998

Dual mode ring resonators(DMRR) have been fabricated using laser ablated $YBa_2Cu_3O_{7-x}$ superconducting thin films. The transition temperature of YBCO thin films were 85 - 88 K and the film thicknesses were about 5,000 $\AA$. Dual mode ring resonators were patterned by standard photolithography process and wet-etching. Then two-layer metal thin films (Ti/Ag) have been deposited for the ground plane on the back side of substrate by e-beam and thermal evaporation. The input/output feedline angles of each resonator were $60^{\circ}$, $100^{\circ}$, $180^{\circ}$. A network analyzer was used for testing the performance of the resonators in the frequency range of 6-13 GHz at 77 K.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 통신소사이어티 추계학술대회논문집
• /
• pp.317-322
• /
• 2003

In this paper, we design a slow-wave bandpass filter that uses a microstrip line periodically loaded with microstrip ing resonators for WLAN(5 GHz). Unlike conventional slow-wave filters, this filter is designed to produce a narrow passband at the fundamental mode of the resonators and provide lower insertion loss than that of parallel- or cross-coupled ring bandpass filters. A PBG(Photonic Band Gap) structure patterned in the ground plane is used to suppress the spurious transmission and extend out-of-band rejections Experimental result shows that the first spurious response in the stopband of the slow-wave bandpass filter can be rejected using a PBG structure.

• 한국전기전자재료학회논문지
• /
• 제25권5호
• /
• pp.361-365
• /
• 2012

A bolt-clamped ultrasonic viscometer was designed and fabricated using a pair of ring-shaped piezoelectric ceramic resonators. For its compactness and low operation frequencies, simulation of piezoelectric resonators was carried out using an ATILA program. Ring-shaped resonators using $0.05Pb(Mn_{1/3}Sb_{2/3})O_3-0.95Pb(Zr_{0.475}Ti_{0.525})O_3$ ceramics were prepared by a conventional ceramic processing, which were then clamped with a pair of metal caps. The fabricated sensor module with a small volume of less than 1 $cm^3$ and an operation frequency as low as 26.5 kHz showed a good relationship between its quality factor and the viscosity of oil.

• Journal of electromagnetic engineering and science
• /
• 제15권2호
• /
• pp.120-122
• /
• 2015

This study presents a new, simple method for improving the front-to-back (F/B) ratio of a microstrip patch antenna (MSA) based on surface wave suppression. The back radiation of the MSA is significantly reduced by using the meandered ground plane edges and placing split-ring resonators (SRRs) in the middle of the meandered slots. By loading SRRs near the center of the meandered ground plane edges, some parts of the diffracted back-lobe power density can be reduced further. Compared to the F/B ratio of a conventional MSA with a full ground plane of the same size, an improved F/B ratio of 18 dB has been achieved experimentally for our proposed MSA.

• 한국산학기술학회논문지
• /
• 제14권7호
• /
• pp.3450-3453
• /
• 2013

본 논문에서는 마이크로 스트립 선로로 구성된 Split Ring Resonator (SRR) 구조를 이용하여 대역통과 필터를 설계하였다. 설계된 필터는 metamaterial 구조이며, 두 개의 공진주파수를 갖는다. SRR은 마이크로 스트립 선로에 삽입된 4개의 SRR 구조로 설계 되었다. 각각의 SRR은 가상 스위치 동작에 의해 4개의 state를 가지며, Switch의 ON/OFF동작에 따라 주파수 재구성 특성을 보이는 대역 통과 공진기를 설계하였다. 공진기의 전자기적 특성을 설명하기 위해 Ziolkowski 방법으로 유전율과 투자율을 계산하였다.

• 한국ITS학회:학술대회논문집
• /
• 한국ITS학회 2002년도 제1회 정기총회 및 학술대회
• /
• pp.141-144
• /
• 2002

• 한국소음진동공학회논문집
• /
• 제21권4호
• /
• pp.357-364
• /
• 2011

In this study, ring-shaped acoustic resonators were proposed to be installed in a silencer to increase the acoustic performance of silencer in the low-frequency range. Evaluation of noise reduction performance of acoustic resonator arrays was carried out by measuring the random-incidence absorption coefficient. It was found that the absorption coefficient of resonator array was measured up to 1 at 125 Hz of 1/3-octave band center frequency. Insertion losses of silencers with ring-shaped acoustic resonator arrays were measured based on ISO 7235. The results were shown that the ring-shaped resonator could increase the insertion loss up to 13 dB without flow, whereas 7 dB when flow speed reached 15 m/s. As increasing the flow speed above 15 m/s, the effect of acoustic resonator decreased due to the effect of nonlinear air damping of the resonator. It was also found that the increment of pressure drop by the presence of resonator arrays was about 9 % at flow speed of 25 m/s.

• 한국전자파학회논문지
• /
• 제14권8호
• /
• pp.878-883
• /
• 2003

본 논문에서는 평판형 마이크로스트립 공진기를 위한 선형 및 지수형 테이퍼 라인을 이용한 급전선 구조를 제안하였다. 제안된 테이퍼 급전선(Tapered Feedline: TFL)은 결합 효율 증가에 의해 공진기 설계시 발생하는 결합 손실과 임피던스 부정합의 문제를 해결하였다. 제안된 구조의 급전각에 따른 삽입 손실 및 대역폭 변화에 대한 특성이 평가되었으며, ${\lambda}_{g}$/2의 최적 급전선 길이가 제시되었다. 제안된 테이퍼 급전선 구조를 마이크로스트립 링 공진기/여파기와 패치 안테나에 적용하였으며, 공진기/여파기 구조에서는 약 7 dB의 삽입 손실 이득을 얻었으며, 패치 안테나에서는 우수한 정합 특성과 왜곡 없는 방사 패턴 등을 나타내었다.

• 한국광학회지
• /
• 제22권6호
• /
• pp.256-261
• /
• 2011

본 논문에서는 결합 링 공진기 구조 기반의 가변 광신호 지연기를 고 굴절률 차이를 갖는 폴리머 물질을 이용하여 설계 및 제작하였다. 링들의 FSR은 100 GHz 로 설계하였고, 8 개의 링들이 결합된 구조를 사용하였다. 버스 도파로에 가까운 두 개의 링들이 공진하는 경우 약 100 ps, 4 개의 링들이 공진하는 경우 180 ps 정도의 지연시간이 측정되었으며, 이는 이론적인 결과에 가까움을 확인할 수 있었다.