• 한국전자통신학회논문지
• /
• 제12권5호
• /
• pp.817-828
• /
• 2017

단일 스트림 기준으로 10Gbps에 달하는 데이터 처리를 수행하는 시스템은 매우 제한적이고, 그에 관한 애플리케이션 역시 극소수에 불과한 실정이다. 하지만 이러한 시스템은 물리, 천문 등 과학연구 분야에서 더욱 그 중요성이 부각되고 있으며, 업그레이드 된 성능을 요구하고 있다. 이를 위해 해당 분야의 중소기업 지원을 위해 1년 전 10Gbps 수준으로 네트워크 입력되는 고속의 패킷 수신, 저장을 수행하는 초고속 스토리지가 개발되었다. 하지만 실제 연구 현장에서 사용되기 위해서는 객관화된 성능 평가가 수반되어야 하며 최적화가 이뤄져야 한다. 본 논문에서는 이에 필요한 시스템 환경을 구축한 것을 시작으로 객관화된 성능 지표를 얻기 위한 실험 과정 및 방법론에 대해 논의하였다.

• ALGAE
• /
• 제20권4호
• /
• pp.363-368
• /
• 2005

The brown alga Ascophyllum nodosum and its mutualistic, ascomycete symbiont, Mycophycias ascophylli, form a complex ‘rganism’or symbiotum. Here we show the interaction of the symbiotum to the abundant brown algal epiphyte, Elachista fucicola. Microscopy of field-collected plants shows morphological responses of A. nodosum to the common epiphyte E. fucicola. When E. fucicola attaches to A. nodosum a bundle of several to dozens of rhizoids penetrates into the host. On the surface of the host, the cells proliferate to form a donut-shaped ring, 100-200 μm in height that surrounds the thallus of E. fucicola. A pit forms in advance of the rhizoids and the cells of A. nodosum break down. This leaves the network of fungal hyphae partially intact and intermingling with the epiphyte rhizoids and its lowermost cells. After the pit is formed, the cells of A. nodosum bordering the infection chamber redifferentiate an epidermal layer. Neither the host nor its mutualistic fungus, M. ascophylli appears to recognize E. fucicola as an invader and to prevent the attachment and growth of this epiphyte. Based on the physical damage to the host caused by invading rhizoids, we conclude that the relationship of E. fucicola to A. nodosum is that of a parasite and its host.

• Carbon letters
• /
• 제5권4호
• /
• pp.159-163
• /
• 2004

The polymer-ceramic hybrid, known as 'ceramer', was synthesized by a sol-gel process by incorporating different amount of alkoxide as source of silicon in resorcinol-formaldehyde in presence of basic catalyst to get different percentage of silicon in ultimate carbonized composites. FTIR of the ceramer confirms that it is a network of Si-O-Si, Si-O-$CH_2$ and Si-OH type groups linked with benzene ring. Different amount of silicon in the ceramer exhibits varying temperature of thermal stability and lower coefficient of thermal expansion as compared to pure resorcinol-formaldehyde resin. The lower value of CTE in ceramer is due to existence of silica and resorcinol -formaldehyde in co-continuous phase. Unidirectional composites prepared with ceramer matrix and high-strength carbon fibers show lower value of flexural strength at polymer stage as compared to those prepared with resorcinol-formaldehyde resin. However, after heat treatment to $1450^{\circ}C$, the ceramer matrix composites show large improvement in the mechanical properties, i.e. with 7% silicon in the ceramer, the flexural strength is enhanced by 100% and flexural modulus value by 40% as compared to that of pure resorcinol-formaldehyde resin matrix composites.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.410-413
• /
• 2007

Water vapor in the atmosphere is an influential factor of the hydrosphere cycle, which exchanges heat through phase change and is essential to precipitation. Because of its significance in altering weather, the estimation of water vapor amount and distribution is crucial to determine the precision of the weather forecasting and the understanding of regional/local climate. It is shown that it is reliable to measure precipitable water (PW) using long baseline (500-2000km) GPS observations. However, it becomes infeasible to derive absolute PW from GPS observations in Taiwan due to geometric limitation of relatively short-baseline network. In this study, a method of deriving Near-Real-Time PW from short baseline GPS observations is proposed. This method uses a reference station to derive a regression model for wet delay, and to interpolate the difference of wet delay among stations. Then, the precipitable water is obtained by using a conversion factor derived from radiosondes. The method has been tested by using the reference station located on Mt. Ho-Hwan with eleven stations around Taiwan. The result indicates that short baseline GPS observations can be used to precisely estimate the precipitable water in near-real-time.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
• /
• pp.205-205
• /
• 2011

The self-assembly of ${\gamma}$-phenylalanine on Au(111) at 150 K was investigated using scanning tunneling microscopy (STM). Phenylalanine can potentially form two-dimensional (2D) molecular networks through hydrogen bonding (through the carboxyl and amino groups) and ${\pi}-{\pi}$ stacking interactions (via aromatic rings). We found that ${\gamma}$-phenylalanine molecules self-assembled on Au(111) surfaces into well-ordered structures such as ring-shaped clusters (at low and intermediate coverages) and 2D molecular domains (intermediate and monolayer coverages), whereas ${\alpha}$-phenylalanine molecules formed less-ordered structure on Au(111). The self-assembly of ${\gamma}$- but not ${\alpha}$-phenylalanine may be related to the flexibility of the carboxyl and amino groups in the molecule. Moreover, as expected, the 2D molecular network of ${\gamma}$-phenylalanine on Au(111) was mediated by a combination of hydrogen bonding and ${\pi}-{\pi}$ stacking interactions.

• 한국공간구조학회논문집
• /
• 제1권1호
• /
• pp.117-124
• /
• 2001

In Single-layer latticed domes with rectangular network which is composed of ring of circumferential direction and rafter of longitudinal direction, that is, rib domes, if we use the cross-membered junction's method for the advantage in fabrication and construction, the eccentricity is occurred in the nodal point of crossing members. This paper is aimed at investigating the buckling characteristics for the effect of eccentricity according to rise-span ratios and distance of eccentricity. Analysis method is based on FEM dealing with the geometrically nonlinear deflection problems. The conclusion were given as follows: 1. The maximum decreasing ratio of buckling strength due to the junction's eccentricity is about 60% in models of this paper. 2. In the increasing ratio of buckling strength for rise-span ratio, that of Type 3 models is larger than that of type 2 models. On the other hand, that of Type 2 mode is larger than that of Type 3 for eccentricity-distance. 3. In the viewpoint of the value of buckling strength, that of Type 2 models is larger than that of type 3 models. The effect of the junction's rigidity on buckling strength is not great for overall models. Therefore if we use the cross-membered junction's method for the advantage in fabrication and construction, the method of Type 2 will have the great advantage of that of Type 3.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
• /
• pp.23-26
• /
• 2004

Five-port reflectometer which consists of a ring with 5 arms (two inputs, three outputs) and three RF power detectors has been used as a vector network analyser, a demodulator in the homodyne receiver as well as in Phase Looked Loop (PLL) and so on. Calibration of five-port reflectometer is an important task. In this paper, we present a calibration method of five-port for a propagation channel sounder. The method is based on measurement of the phase differences between the three voltages at the five-port's outputs in order to determine the ratio of two input incident waves. The frequency channel sounder based on five-port is calibrated for each frequency from 2.2 GHz to 2.6 GHz with 1 MHz step. This method can also determine the absolute delays of each propagation path in the propagation channel. The calibration method is validated using measurement data.

• ETRI Journal
• /
• 제38권1호
• /
• pp.18-29
• /
• 2016

In this paper, we discuss the issues of providing protection for point-to-multipoint connections in both Ethernet and MPLS-TP-based packet transport networks. We introduce two types of per-leaf protection-linear and ring. Neither of the two types requires that modifications to existing standards be made. Their performances can be improved by a collective signal fail mechanism proposed in this paper. In addition, two schemes - tree protection and hybrid protection - are newly proposed to reduce the service recovery time when a single failure leads to multiple signal fail events, which in turn places a significant amount of processing burden upon a root node. The behavior of the tree protection protocol is designed with minimal modifications to existing standards. The hybrid protection scheme is devised to maximize the benefits of per-leaf protection and tree protection. To observe how well each scheme achieves an efficient traffic recovery, we evaluate their performances using a test bed as well as computer simulation based on the formulae found in this paper.

• 품질경영학회지
• /
• 제26권1호
• /
• pp.192-200
• /
• 1998

The quickest path problem is one of the important things for quality of services in communication networks. It is to find a path to send a given amount of data from the source to the sink with minimum transmission time, where the transmission time is dependent on both the capacities and the traversal times of the arcs in the network. This is found under the networks that the capacity and the lead time of each ring are predetermined. It is general to solve the quickest path problem using shortest path algorithms. The relevant algorithms proposed till now are based on the capacity of rings in distributed environments. When the configuration of networks is changed, there can be two a, pp.oaches to find the quickest paths. The one is to find new quickest paths, and the other is to update the current quickest paths. As one of the algorithms for the latter, the distributed quickest path update algorithm was proposed. This paper aims to propose the distributed algorithm a, pp.icable to find the quickest path, when the configuration of networks is changed, using the quickest path tree update altorithm, and to verify its possibility of a, pp.ication by analyzing the transmission amount of data from one node to another from the theoretical point of view.

• Bulletin of the Korean Chemical Society
• /
• 제4권2호
• /
• pp.79-83
• /
• 1983

The structure of thiamphenicol, one of the congeners of chloramphenicol which is a well-known antibiotic, has been determined by single crystal x-ray diffraction techniques. The crystal structure was determined using diffractometer data obtained by the $2{\theta}:{\omega}$ scan technique with $MoK{\alpha}$ radiation from a crystal having space group symmetry $P2_{1}2_{1}2_{1}$, and unit cell parameters a = 5.779, b = 15.292 and c = 17.322 ${\AA}$ . The structure was solved by direct methods and refined by least squares to an R = 0.070 for the 2116 reflections. The overall V-shaped conformation of thiamphenicol revealed in this study is consistent with those from the crystallographic studies and the proposed models from the theoretical and nmr studies of chloramphenicol. However there is no intramolecular hydrogen bond and the propanediol moiety is fully extended in the thiamphenicol molecule, while the crystal structures of chloramphenicol show the existence of the hydrogen bond between the two hydroxyl groups of the propanediol moiety forming an acyclic ring. All of the thiamphenicol molecules in the crystal are linked by a threedimensional hydrogen bonding network.