• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(3)
• /
• pp.265-270
• /
• 1996

The temperature distribution in the pellet was obtained from beginning the general heat conduction equation. The thermal conductivity of pellet used the SIMFUEL data that made clear the effect of burnup on the thermal conductivity degradation. Since the pellet rim acts as the thermal barrier to heat flow. the pellet was subdivided into several rings in which the outer ring was adjusted to play almost the same role as the rim. The local burup in each ring except the outer ring was calculated from the power depression factor based on FASER results. whereas the rim burnup at the outer ring was achieved by the pellet averaged burnup based on the empirical relation. The rim changed to the equivalent Xe film so the predicted temperature shooed the thermal jump across the rim. The observed temperature profiles depended on linear heat generation rate. fuel burnup. and power depression factor. The thermal conductivity degradation modelling can be applied to the fuel performance code to high burnup fuel,

• International Journal of Control, Automation, and Systems
• /
• 제1권2호
• /
• pp.215-221
• /
• 2003

The education system in this paper is used to demonstrate and educate the effects of electromagnetic induction. Placing an aluminum ring over the core and switching on AC source causes the ring to jump in the air due to induced currents in the ring producing a magnetic field opposed to that produced in the core. To control the position of the ring by only the current, it is to require nonlinear control algorithm and control board that is composed of photo sensors, decode circuit, computer communication, and power electronics circuit. This paper provides the development for education system in detail and the effects of dynamic neural networks for nonlinear control with on line is studied.

• 사상체질의학회지
• /
• 제7권1호
• /
• pp.69-101
• /
• 1995

Using Bi-Digital O-Ring Test which was developed by Ohmura Toshiaki, constitution classification by the vegetables' was measured by various muscle power measurement meters and the results are as follow : 1. Pinch guage (Model : pc5030HPG, Japan) is the guage to measure finger power between the thumb and second finger, Grip Strength Dynamometer (Model : T.K.K. 5101, Japan) is to measure the hand power (hand dynamometer), Back Strength dynamometer (Model : T.K.K. 5102, Japan)is to measue back muscle strength, Vertical Jump Meter (Model : T.K.K. 5106, Japan) is to measure the height of jump. The above guages were used and its result found that the radish, potato, carrot and cucumber can influence to the muscle strength was not true. 2. When the physical constitution is distinguished vy the O-Ring Test method, Taeyangin's rate appeared as average 21% although it was insistedthat there will be only 0.03-0.1%. This means that the influence power of vegetable doest not appear according to the physical constitution but it appears accidently according to the examinee's emotion about the material such as vegetable etc. as favor or unfavor. 3. It was found that the result of O-Ring Test is the same at any time and at any place was not true. there is no reemergence character. 4. The import of O-Ring Test method to the physical discriminatio disregarded that the mental facor influences absolutely to the physical heath in the ideological physical constitution medicla science. 5. 'O-Ring Test method is a objective judgement method'. is wrong judgement. As you see on the above result, Bi-Digital O-Ring Test set the changeable voluntary muscle as the standard of the judgement, that was first mistake logically, second in spite of leass influence of mental influence by the examiner and examinee than the vegetable discrimination influence, the test disregarded the influence. Thire, only grasp of some material on hand can influence to the voluntary was a wrong theory disregarding the physiology. Finally the misunderstaning his subjective view as an objective view in spite of examiner and examinee's strong influence. Therefore such kind of physical descrimination method must be sublated.

• Bulletin of the Korean Chemical Society
• /
• 제12권6호
• /
• pp.629-632
• /
• 1991

The rate constants for the formation and dissociation of nickel(II) and cobalt(II) complexes with mandelate have been determined by the pressure-jump relaxation study. The forward and reverse rate constants for the mandelate complex formation reactions were obtained to be $k_f=3.60{\times}10^4\;M^{-1}s^{-1}$ and $k_r=1.73{\times}10^2\;s^{-1}$ for the nickel(II), and $k_f=1.75{\times}10^5\;M^{-1}s{-1}$ and $2.33{\times}10^3\;s^{-1}$ for the cobalt(II) in aqueous solution of zero ionic strength ($(\mu{\to}0)\;at\;25^{\circ}C$. The results were interpreted by the use of the multistep complex formation mechanism. The rate constants evaluated for each individual steps in the multistep mechanism draw a conclusion that the rate of the reaction would be controlled by the chelate ring closure step in concert with the solvent exchange step in the nickel(II) complexation, while solely by the chelate ring closure step for the cobalt(II) complex.

• Bulletin of the Korean Chemical Society
• /
• 제13권6호
• /
• pp.659-662
• /
• 1992

The pressure-jump relaxation method has been used to determine the rate constants for the formation and dissociation of maganese(Ⅱ), cobalt(Ⅱ), and nickel(Ⅱ) with some dicarboxylates in aqueous solution at zero ionic strength. The carboxylate ligands used are 3-nitrophthalate, 4-nitrophthalate, and phenylmalonate. The activation parameters have alse been obtained from the temperature dependence of the rate constants. A dissociative interchange mechanism with a chelate ring closure step as rate determining is employed to interpret the kinetic data of manganese(Ⅱ) and cobalt(Ⅱ) complexes. The rates of formation of nickel(Ⅱ) complexes are controlled by both the solvent exchange step and the chelate ring closure step.

• 소성∙가공
• /
• 제4권1호
• /
• pp.92-104
• /
• 1995

It often happens some elements are so largely distorted during a large-deformation finite element analysis that further calculation becomes impossible or the approximation error increases rapidly. This problem can be overcomed only by remeshing at several suitable stages. The present study aimed to establish the criterion based on the error estimators, and examined in the simulation and posterior error analysis of ring compression test to demonstrate the usefulness of them. The distribution of each error estimator and its variation during deformation were investigated. All the error estimators were increased monotonously with deformation and decreased rapidly at remeshing stage. It was shown that the error estimators suggested in this study are good measures as remeshing criterion for large deformation finite element analyses.

• Journal of Advanced Marine Engineering and Technology
• /
• 제24권6호
• /
• pp.7-14
• /
• 2000

Nowadays, the viscous damper using high viscosity oil was much to be used for engine shafting system to reduce the excessive additional stress by torsional vibration. In general, it was assumed that the viscous damper could be modelled having only damping coefficient, that is to say, whose stiffness be ignored. But it is found that there exists a jump phenomenon, as a kind of non-linear vibration, in the actual engine shafting system with a damper of high viscosity. Therefore the damper ring and the casing are modelled as two mass elastic system with a complex viscosity. Also, to analyze a non-linear phenomenon, it is assumed that the viscous damper has a linear stiffness coefficient in proportion to the angular amplitude and a non-linear stiffness coefficient in proportion to cube of the angular amplitude. For the analysis, Quasi-Newton method with BFGS(Broyden-Fletcher-Goldfarb-Shanno) formula is used. Both calculated and measured values are provided in this paper which confirm the possibility of applying non-linear theory to engine shafting system with viscous damper.

• Journal of Advanced Marine Engineering and Technology
• /
• 제20권4호
• /
• pp.50-58
• /
• 1996

The torsional vibration of the propulsion shafting system equipped with viscous damper is investigated. The equivalent system is modeled by a two mass softening system with Duffing's oscillator and the vibratory motion is described by non-linear differential equations of second order. The damper casing is fixed at the front-end of crankshaft and the damper's inertia ring floats in viscous silicon fluid inside of the camper casing. The excitation frenquency is proportional to the rotational speed of engine. The steady state response of the equivalent system is analyzed by the computer and for this analyzing, the harmonic balance method is adopted as a non-linear vibration analysis technique. Frequency response curves are obtained for 1st order resonance only. Jump phenomena are explained. The discriminant for the solutions of the steady state response is derived. Both theoretical and measured results of the propulsion shafting system are compared with and evaluated. As a result of comparisions with both data, it was confirmed that Duffing's oscillator can be used in the modeling of the propulsion shafting system attached with viscous damper with non-linear stiffness.

• Journal of Advanced Marine Engineering and Technology
• /
• 제20권4호
• /
• pp.372-372
• /
• 1996

The torsional vibration of the propulsion shafting system equipped with viscous damper is investigated. The equivalent system is modeled by a two mass softening system with Duffing's oscillator and the vibratory motion is described by non-linear differential equations of second order. The damper casing is fixed at the front-end of crankshaft and the damper's inertia ring floats in viscous silicon fluid inside of the camper casing. The excitation frenquency is proportional to the rotational speed of engine. The steady state response of the equivalent system is analyzed by the computer and for this analyzing, the harmonic balance method is adopted as a non-linear vibration analysis technique. Frequency response curves are obtained for 1st order resonance only. Jump phenomena are explained. The discriminant for the solutions of the steady state response is derived. Both theoretical and measured results of the propulsion shafting system are compared with and evaluated. As a result of comparisions with both data, it was confirmed that Duffing's oscillator can be used in the modeling of the propulsion shafting system attached with viscous damper with non-linear stiffness.

• 한국식품영양학회지
• /
• 제6권4호
• /
• pp.255-267
• /
• 1993

This study was performed to investigate the correlations among physical anthropometric measurement, diet intakes, physical fitness test, and serum lipids in eight sedentary women(control group), and twenty seven exercising women(aerobic groups), aged 35~45 years. The results of the study are as follows : 1) systolic blood pressure(SBP) and diastolic blood pressure(DBP) of aerobic groups were lower than serf entary. Pulse rate was decreased according to the length of aerobic periods. Muscular endurance and jump power of all subjects were stronger than standard range, and those of aerobic exercising groups were stronger than control group. Muscular power of the upper half of the body In all subjects were lower than standard range. 2) Daily calorie intakes of all subjects were in the ring: of recommended dietary allowances (RDA) for Koreans. But daily protein Intakes were higher than RDA. daily cholestrol intakes of all subjects were slightly less than 200~300 mg: which is normal consumption of Koreans. 3) There was a significant positive correlation between serum 7G and daily protein intakes. It was considered that excessive protein intake converted to serum 7G. There was not a significant correlation between serum TC and dietary TC. Therefore, dietary TC seemed to have not much effect on serum TC. Physical fitness was negatively related to serum TG, TC, LDL-C, but positively related to HDL-C, HDL-C /TC. It was found that the serum lipids could be changed better according to improving the physical fitness. There were significant positive correlations between SBP and serum TC, LDL-C. (According to this results), the higher SBP, the higher serum TC, LDL-C tended to be. There was a significant positive correlations between sit up and weightloss nth exercise r=0.7(p<0.001), push ups and weightless with exercise r=0.5(p<0.001). It was considered that muscle strength could be improved according to the weightloss. 4) The purpose of exercise in aerobic groups was rather promoting health than reducing body fatness. Most of al1 subjects (83.2%) drank caffeine-contained beverage therefore, we should concern about that absorption of Fe could be Interrupted and blood pressure could be elevated by caffeine.