• Journal of Magnetics
• /
• v.18 no.3
• /
• pp.302-307
• /
• 2013

Hybrid-type magnetic bearings using both permanent magnets and electromagnets have been used for rotating machinery. In the case of conventional thrust hybrid magnetic bearings supporting axial loads, radially magnetized permanent ring magnets, which have several demerits such as difficult magnetization and assembly, have been used to generate bias flux. In this study, a novel thrust hybrid magnetic bearing using an axially magnetized permanent ring magnet is presented. Because it is easy to magnetize a ring magnet in the axial direction, the segmentation of the ring magnet for magnetization is not required and the assembly process can be simplified. For verifying the performance of the proposed method, a test rig that consists of a proposed thrust magnetic bearing and variable loads is constructed. This paper presents the detailed design procedures and the obtained experimental results. The results show that the developed thrust magnetic bearing has the potential to replace conventional thrust magnetic bearings.

• Design & Manufacturing
• /
• v.11 no.3
• /
• pp.46-50
• /
• 2017

Press processing is one of the best machining methods capable of mass production, satisfying dimensional, shape and quality among the methods of processing a metal plate. Among them, Fine blanking is a method of obtaining a precise cross-section such as machining of the shear surface shape. In this research, Using SCP-1 and SHP-1 materials. The deformation behaviors of the material flow affecting the die height of the shear section in accordance with the position of the V-ring in the Fine blanking were compared and analyzed. Result of interpretation, It was confirmed that the force acts on the position where the material flow direction accurately forms the die roll that the material of SCP-1 is at a position of 1.5 mm and the material of SHP-1 is at 2.0 mm. As a result, it was confirmed that the state of fo1111ing the shear surface by the V-ring was excellent. Using analysis results, In the experiment, the height of the die roll was considered by applying The position of the V-ring was 1.5 mm in SCP-1 and 2.0 mm in SHP-1. As a result of comparing the height of the die rolls, the height values of the die rolls were different from each other, It has been considered that the tendency of the die rolls to coincide with each other. It is considered that the difference of the die roll height is caused by the pressure input of the V-ring. In this study, the deformation behavior of the material(In addition to the position of the V-ring, the flow direction of the material depends on the shape of the V-ring and the Indentation amount) is considered to be an important factor in determining die roll height.

• Journal of KIISE:Computer Systems and Theory
• /
• v.29 no.2
• /
• pp.105-115
• /
• 2002

Since NUMA architecture has to access remote memory an interconnection network determines the performance of CC-NUMA system Bus which has been used as a popular interconnection network has many limits to build a large-scale system because of the limited physical scalabilty and bandwidth Dual ring interconnection network composed of high speed point-to-point links is made up for resolving the defects of the bus for large-scale system But it also has a problem that the response latency is rapidly increased when many node are attached to snooping based CC-NUMA system with dual ring In this paper we propose a chordal ring architecture in order to overcome the problem of the dual ring on snooping based CC-NUMA system and design and efficient link controller adopted to this architecture. We also analyze the effects of chordal ring architecture on the system performance and the response latency by using probability driven simulator.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.11
• /
• pp.1391-1397
• /
• 2012

A cam ring gear (CRG) system based on a hypotrochoid curve consists of a pinion with roller teeth and its conjugated internal CRG. In this study, we investigated contact forces, contact stresses, and load stress factors to predict the surface pitting life using an exact CRG profile by introducing the profile modification coefficient. The results show that the pitting life can be extended significantly by increasing the profile modification coefficient without any other change of parameters in the CRG system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.11
• /
• pp.1662-1667
• /
• 2012

This paper describes the design of size-reduced ring hybrid couplers (RHC) using a common defected ground structure (CDGS). The proposed RHC consists of double-sided microstrip line and the CDGS patterns which are placed in the common ground plane of the double-sided microstrip line. The effects of DGS as a periodic structure are imposed on both microstrip lines, so the advantages of the existing DGS are doubled. The normal RHC is designed first and folded by the half reference plane with the CDGS realized on the common ground plane. So another trial for size-reduction is performed by folding the RHC and inserting CDGS besides to the conventional DGS. In order to show a design example, a 2GHz RHC is designed and miniaturized using CDGS. The size of the miniaturized RHS is around 50% of the normal one, while the performances are well preserved even after the size-reduction.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.1
• /
• pp.49-63
• /
• 2015

In this paper, the results of evaluation on the member forces in the virtual subsea tunnel lining segments and optimal thickness of the segment with changes in depth were presented. To evaluate member forces on the hypothetical subsea tunnelling cases were developed and the segmental lining member forces were calculated by performing structural analysis using the 2-Ring Beam model. Through a preliminary reinforcement design review of the cross-section using calculated member force, optimal reinforcement design was selected. Based on the results, the variations of member forces with construction conditions such as the cover depth and the hydraulic pressure are presented. In addition, optimum segment lining designs were developed for various tunnelling conditions.

• Structural Engineering and Mechanics
• /
• v.2 no.4
• /
• pp.369-381
• /
• 1994

This paper is concerned with the elastic buckling of cylindrical shells with internal rigid ring supports. The internal supports impose a zero lateral deflection constraint on the buckling modes at their locations. An automated Rayleigh-Ritz method is presented for solving this buckling problem. The method can handle any combination of end conditions and any number of internal supports. Moreover, it is simple to code and can yield very accurate solutions. New buckling results for cylindrical shells with a single internal ring support, and under lateral pressure and hydrostatic pressure, are given in the form of design charts. These results should be valuable to engineering designers.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.2 no.4
• /
• pp.28-41
• /
• 2003

A micros-strip ring patch antenna with ultra wide band characteristics is presented. The proposed antenna is designed by a modified form of the annular ring patch antenna with modified microstrip feedline. The designed antenna gives 5.6GHz bandwidth with regular radiation pattern from 4.4GHz to 12.0GHz for -10dE return loss or VSWR of less than 2.0 in simulation, which is also excellently agreed with the measured data.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.12
• /
• pp.562-570
• /
• 2002

The Purpose of this paper is to design and manufacture an educational system in order to demonstrate the causes and effects of electromagnetic induction.'rho educational system described in this study is a "jumping ring apparatus". This system demonstrates the principle of electromagnetic induction, a force from AC sources, Lenz's law of repulsion and transformer. The educational system is composed of a jumping ring apparatus, a sensor array, encoder, A/D converter, D/A converter and nonlinear controller. The educational system is controlled by 586 PC using Turbo C program. The sensor array is composed of 20 optical sensors. The nonlinear controller consists of nonlinear control algorithm and control board included SCR, FET and phase controller. The A/D converter is used to show the height of ring position to analog for an education purpose. The control signal calculated from the nonlinear control of algorithm send control board through 8 bit D/A convertor. Experiment results are given to verify that Proposed nonlinear controller is useful in on line control of the educational system.al system.

• Journal of IKEEE
• /
• v.15 no.2
• /
• pp.157-163
• /
• 2011

In this paper, novel traffic groomming algorithms are proposed with a primary goal for maximizing throughput in WDM Multi-ring networks. To achieve this goal, we design four network topologys that are ITG, STG, MTG, PMTG and simulate the throughput in uniform traffic environments. From this methods, we proposed novel traffic groomming algorithms to maximize throughput in WDM Multi-ring networks.