• 대한기계학회논문집A
• /
• 제36권8호
• /
• pp.905-911
• /
• 2012

부유식 해상풍력발전기의 시뮬레이션을 위해서 본 연구에서는 2MW 육상 풍력발전기에 부유구조물인 Tension Leg Platform(TLP) 구조를 추가하였다. 기상청 관측데이터와 해수면으로부터의 높이에 대해 풍속을 정의하는 지수법칙을 이용하여 풍하중을 산출하고 블레이드와 타워에 일정한 높이간격으로 적용하였다. 상대모리슨 방정식을 이용하여 파랑하중을 모델링하였다. 블레이드의 회전속도를 정격속도인 18rpm 으로 고려하고, 풍하중과 파랑하중 작용 시 2MW의 부유식 해상풍력기의 동적거동 해석을 수행하였다. 파랑하중에 대한 해상풍력기의 공진특성을 조사하기 위해 타워와 블레이드의 탄성체 모델을 구성하여 해상풍력기의 고유진동수를 계산하였다. 타워와 블레이드의 탄성효과가 해상풍력기의 거동에 미치는 영향을 분석하기 위해 타워만 탄성체로 구성된 탄성타워모델과 타워와 블레이드가 탄성체로 고려된 탄성타워 블레이드모델을 각각 강체 모델과 비교하였다.

• Wind and Structures
• /
• 제25권2호
• /
• pp.101-129
• /
• 2017

Local transient extreme wind loads caused by group tower-related interference are among the major reasons that lead to wind-induced damage of super-large cooling towers. Four-tower arrangements are the most commonly seen patterns for super-large cooling towers. We considered five typical four-tower arrangements in engineering practice, namely, single row, rectangular, rhombic, L-shaped, and oblique L-shaped. Wind tunnel tests for rigid body were performed to determine the influence of different arrangements on static and dynamic wind loads and extreme interference effect. The most unfavorable working conditions (i.e., the largest overall wind loads) were determined based on the overall aerodynamic coefficient under different four-tower arrangements. Then we calculated the one-, two- and three-dimensional aerodynamic loads under different four-tower arrangements. Statistical analyses were performed on the wind pressure signals in the amplitude and time domains under the most unfavorable working conditions. On this basis, the non-Gaussian distribution characteristics of aerodynamic loads on the surface of the cooling towers under different four-tower arrangements were analyzed. We applied the Sadek-Simiu procedure to the calculation of two- and three-dimensional aerodynamic loads in the cooling towers under the four-tower arrangements, and the extreme wind load distribution patterns under the most unfavorable working conditions in each arrangement were compared. Finally, we proposed a uniform equation for fitting the extreme wind loads under the four-tower arrangements; the accuracy and reliability of the equation were verified. Our research findings will contribute to the optimization of the four-tower arrangements and the determination of extreme wind loads of super-large cooling towers.

• 유통과학연구
• /
• 제14권10호
• /
• pp.47-57
• /
• 2016

Purpose - This study's purpose is to investigate the market structure of the Korean duty free shop industry that has received recent attention from researchers and practitioners. By raising the question of whether or not the Korean duty free shop industry is unequivocally monopolistic, a wider viewpoint is provided. The study seeks to offer insights and managerial implications for marketers and policy makers who are in charge of regulating major Korean duty free shops. Research design, data, and methodology - The authors use secondary data from various sources, including Korea Customs Service and the Moodie Report, to investigate the structure of the duty free shop industry of Korea. Based on several theories, they present various criteria and statistical evidence such as K-firm concentration ratio, HHI, consumer substitutability, excess profit, and marketing costs. Results - In terms of consumer substitutability, it is difficult to confirm whether or not the Korean duty free shop industry is monopolistic. Notwithstanding monopoly characteristics in terms of market share, neither the company Lotte nor Shilla appear to have market dominating power. It is not easy for either of them to control prices or to achieve a much lower operational profit ratio due to a dominant bargaining power. Moreover, the license is not an economic rent. In this situation, it is not easy for these companies to obtain an excessive profit. Conclusions - Considering that most global duty free shops are trying to go upscale to improve bargaining power, it does not seem likely that rigid regulations are needed in the industry. Even though the Korean duty free industry ostensibly has a monopolistic structure, government and policy-makers should look beyond the surface. They should take global and other reasonable criteria into consideration when they establish or change regulation policies. Thorough understanding and appropriate support are needed for the Korean duty free shop industry. Additionally, duty free shops should position themselves as global companies struggling against unlimited international competition, rather than Korean domestic companies. At the same time, they need to give customers appropriate information about the benefits they provide.

• 한국지반신소재학회논문집
• /
• 제15권4호
• /
• pp.89-96
• /
• 2016

인천 ${\bigcirc}{\bigcirc}$지역의 연약지반에 시공된 변단면 연약지반보강기초(Variable cross-section soft ground reinforced foundation)의 연직압축거동을 분석하였다. 변단면 연약지반보강기초는 원지반과 고화재를 혼합교반하여 형성되는 고형체의 높은 강성과 강도를 이용하여 상부구조물로부터 유발되는 연약하중을 효과적으로 저항하기 위하여 시공된다. 변단면 연약지반보강기초는 군말뚝 형식으로 시공이 되는데, 정확한 연직거동을 알기 위하여 1개소의 기초에 대한 연직재하시험을 수행하였다. 변단면 연약지반보강기초의 거동을 일반적인 깊은 기초의 거동과 비교하기 위하여 유사한 천층지반조건에 시공된 PHC 파일의 재하시험 결과와 비교하여 재하하중에 따른 침하량 및 하중전이 거동특성을 분석하였다. 연직재하시험결과를 비교분석하였다. 변단면 연약지반보강기초는 제한된 범위의 연직하중에 대하여 천층에서도 효율적으로 저항하는 것으로 분석되었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.107-108
• /
• 2006

This paper shows the design optimization of the paper feeding mechanism under dynamic behavior by using commercial codes of RecurDyn/MTT2D and RecurDyn/AutoDesign which are developed by functionBay, Inc. A virtual mockup for dynamics analysis of the paper feeding mechanism is build on RecurDyn/MTT2D and is simulated. Flexible paper is represented as a series of rigid bars connected by revolute joints and rotational spring dampers. Paper is fed by a contact and friction mechanism on rollers or guides. The slip of the paper and nip force of rollers are measured to estimate the system performance. After a simulation, these performances are automatically send to RecurDyn/AutoDesign which is a sequential approximate optimization tool based on the response surface modeling. RecurDyn/AutoDesign makes the approximate objective function and computes the optimized design points of the design variables and gives them to analysis tool. And then the simulation is repeated with the updated design variables. These processes are repeated until finding a tolerable design optimization. In this paper, a paper feeding mechanism is introduced and it is optimized with the proposed algorithms.

• 한국자기학회지
• /
• 제6권2호
• /
• pp.106-111
• /
• 1996

전동기와 같이 가동부를 갖는 전기기기는 힘이나 토크를 발생시키기 위하여 고안되었고, 힘이나 토크는 이들 기기의 해석과 설계에 중요한 요소이다. 지금까지 유한요소법을 이용한 전자력 계산 방법으로는 여러가지 방법들이 제시되어 왔고, 그 중 널리 사용되는 방법으로는 맥스웰 응력법과 가상변위법이 있다. 맥스웰 응력법은 맥스웰 스트레스텐서를 이용하여 표면 전자력 밀도를 구하고 이의 표면 적분으로 전자력을 구하는 방법이고, 가상변위법은 물체에 변위가 일어났을 때 발생하는 에너지의 변화량을 이용하여 전자력을 구하는 방법이다. 전류원이 포함된 문제에서는 정확도를 높이기 위하여 벡터포텐셜을 주로 이용하여 자장해석을 하여 왔으므로 본 논문에서는 유한요소법으로 3차원 자장 문제를 해석한 결과인 자기벡터포텐셜을 맥스웰 응력법과 가상변위법에 적용하여 전기기계의 각 요소의 전자력을 구하는 방법을 제시한다. 제시한 방법의 검증을 위하여 해석 모델을 솔레노이드로 하여 제시한 방법으로 구한 전자력을 3차원으로 해석한 결과와 비교하여 그 유용성을 증명한다.

• Tribology and Lubricants
• /
• 제23권5호
• /
• pp.219-227
• /
• 2007

The dynamic performance of air foil bearings relies on a coupling between a thin air film and an elastic foil structure. A number of successful analytical techniques to predict dynamic performance have been developed. However, the evaluation of its dynamic characteristic is still not enough because of the mechanical complexity of the foil structure and strong nonlinear behavior of friction force. This work presents a nonlinear transient analysis method to predict dynamic performance of foil bearings. In this method, time dependent Reynolds equation is used to calculate pressure distribution and a finite element method is used to model the bump foil structure. The analysis is treated with a direct implicit integration technique that can handle nonlinear problems and the stick-slip algorithm is used to consider friction force. Using this method the response to the mass unbalance excitation is investigated for various design parameters and operating conditions. The results of analysis show that foil bearing is very effective on the restriction of vibration at the resonance frequency compared to the rigid surface bearings and the effectiveness depends on the operating conditions, static load and a amount of mass unbalance. In addition, there exist optimum values of friction coefficient, bump foil stiffness and number of circumferential slit with regards to minimizing dynamic response at the resonance frequency. These optimum values are system dependent.

• Structural Engineering and Mechanics
• /
• 제43권5호
• /
• pp.637-655
• /
• 2012

In this study, stochastic responses of a cable-stayed bridge subjected to the spatially varying earthquake ground motion are investigated by the finite element method taking into account soil-structure interaction (SSI) effects. The considered bridge in the analysis is Quincy Bay-view Bridge built on the Mississippi River in between 1983-1987 in Illinois, USA. The bridge is composed of two H-shaped concrete towers, double plane fan type cables and a composite concrete-steel girder deck. In order to determine the stochastic response of the bridge, a two-dimensional lumped masses model is considered. Incoherence, wave-passage and site response effects are taken into account for the spatially varying earthquake ground motion. Depending on variation in the earthquake motion, the response values of the cable-stayed bridge supported on firm, medium and soft foundation soil are obtained, separately. The effects of SSI on the stochastic response of the cable-stayed bridge are also investigated including foundation as a rigidly capped vertical pile groups. In this approach, piles closely grouped together beneath the towers are viewed as a single equivalent upright beam. The soil-pile interaction is linearly idealized as an upright beam on Winkler foundation model which is commonly used to study the response of single piles. A sufficient number of springs on the beam should be used along the length of the piles. The springs near the surface are usually the most important to characterize the response of the piles surrounded by the soil; thus a closer spacing may be used in that region. However, in generally springs are evenly spaced at about half the diameter of the pile. The results of the stochastic analysis with and without the SSI are compared each other while the bridge is under the sway of the spatially varying earthquake ground motion. Specifically, in case of rigid towers and soft soil condition, it is pointed out that the SSI should be significantly taken into account for the design of such bridges.

• 대한조선학회논문집
• /
• 제38권4호
• /
• pp.11-22
• /
• 2001

프로펠러-WIG(Wing in Ground Effect)선의 상호작용 및 성능을 포텐셜 유동에 의해 해석하였다. 프로펠러는 보오텍스 격자법(VLM)을 사용하였고 WIG선은 포텐셜 기저 패널법을 사용하여 각 경계조건을 만족시키면서 반복계산을 통하여 상호작용 및 성능을 해석하였다. 자유수면은 강체로 가정하여 경상법을 사용하였다. 프로펠러-WIG의 상호작용 및 성능을 해석하기에 앞서 발표된 실험결과와 계산결과가 있는 MP101 프로펠러와 MR-21 타의 상호작용 및 성능해석을 수행하여 개발된 프로그램의 정도를 검증하였다. 프로펠러-WIG선의 상호작용해석은 프로펠러의 부착위치, 직경 및 회전수의 변화에 따른 비행고도 높이 변화에 대한 양력 및 피치모멘트를 계산하여 비교하였다. 날개 앞에 부착된 프로펠러는 WIG선의 양력을 급격히 향상시키며 정적안정성을 향상시킴을 알았다. 따라서 적절한 프로펠러의 크기, 부착위치 및 회전수의 선택이 PARWIG선의 성능향상을 위해 필수적임을 알았다.

• Journal of Information Processing Systems
• /
• 제8권1호
• /
• pp.55-66
• /
• 2012

This paper presents a dual modeling method that simulates the graphic and haptic behavior of a volumetric deformable object and conveys the behavior to a human operator. Although conventional modeling methods (a mass-spring model and a finite element method) are suitable for the real-time computation of an object's deformation, it is not easy to compute the haptic behavior of a volumetric deformable object with the conventional modeling method in real-time (within a 1kHz) due to a computational burden. Previously, we proposed a fast volume haptic rendering method based on the S-chain model that can compute the deformation of a volumetric non-rigid object and its haptic feedback in real-time. When the S-chain model represents the object, the haptic feeling is realistic, whereas the graphical results of the deformed shape look linear. In order to improve the graphic and haptic behavior at the same time, we propose a dual modeling framework in which a volumetric haptic model and a surface graphical model coexist. In order to inspect the graphic and haptic behavior of objects represented by the proposed dual model, experiments are conducted with volumetric objects consisting of about 20,000 nodes at a haptic update rate of 1000Hz and a graphic update rate of 30Hz. We also conduct human factor studies to show that the haptic and graphic behavior from our model is realistic. Our experiments verify that our model provides a realistic haptic and graphic feeling to users in real-time.