• 터널과지하공간
• /
• 제2권2호
• /
• pp.212-223
• /
• 1992

The distinct element method(DEM) si well suited to the kinematic analysis of blocky rock masses. Two distinctive problems, a rock avalache and tunnel in jointed rock masses, are chosen to apply the DEM which is based on perfectly rigid behaviour of blocks. Investigated for both problems are the effects of the input parameters such as contact stiffnesses, friction coefficient and damping property. Using various types of models of the avalanche and tunne, an extensive parametric study is done to gain experiences in the method, and then to alleviate difficulties in determining parameter values suitable for a given problem. The coefficient of frictio has significant effects on all aspects of avalanche motion(travel distance, velocity and travel time), while the stiffnesses affect the rebounding and jumping motions after collision. The motion predicted by the models having single and mutiple blocks agrees well to the observations reported on the actual avalache. For the tunnel problem, the behaviour of the key block in an example tunnel is compared by testing values of the input parameters. The stability of the tunnel is dependent primarily on the friction coefficient, while the stiffness and damping properties influence the block velocity. The kinematic stability of a tunnel for underground unclear waste repository is analyzed using the joint geometry data(orientation, spacing and persistence) occurred in a tailrace tunnel. Allowing a small deviation to the mean orientation results in different modes of failure of the rock blocks around the tunnel. Of all parameters tested, the most important to the stability of the tunnel in blocky rock masses are the geometry of the blocks generated by mapping the joint and tunnel surfaces in 3-dimensions and also the friction coefficient of the joints particularly for the stability of the side walls.

• 한국도로학회논문집
• /
• 제19권1호
• /
• pp.37-44
• /
• 2017

PURPOSES : This study is primarily focused on evaluating the effects of the non-linear stress-strain behavior of RAP concrete on structural response characteristics as is applicable to concrete pavement. METHODS : A 3D FE model was developed by incorporating the actual stress-strain behavior of RAP concrete obtained via flexural strength testing as a material property model to evaluate the effects of the non-linear stress-strain behavior to failure on the maximum stresses in the concrete slab and potential performance prediction results. In addition, a typical linear elastic model was employed to analyze the structural responses for comparison purposes. The analytical results from the FE model incorporating the actual stress-strain behavior of RAP concrete were compared to the corresponding results from the linear elastic FE model. RESULTS : The results indicate that the linear elastic model tends to yield higher predicted maximum stresses in the concrete as compared to those obtained via the actual stress-strain model. Consequently, these higher predicted stresses lead to a difference in potential performance of the concrete pavement containing RAP. CONCLUSIONS : Analysis of the concrete pavement containing RAP demonstrated that an appropriate analytical model using the actual stress-strain characteristics should be employed to calculate the structural responses of RAP concrete pavement instead of simply assuming the concrete to be a linear elastic material.

• 한국문화재보존과학회:학술대회논문집
• /
• 한국문화재보존과학회 2002년도 제15회 발표논문집
• /
• pp.21-31
• /
• 2002

고건축물에서 구조재, 결합재, 방수재, 마감재 등의 용도로 매우 중요하게 사용된 강회다짐 재료에 관한 사용기록을 정리하고 문화재 보수 및 복원시 현장에서 느끼는 강회다짐재의 사용상 문제점을 검토하여 다음과 같은 개선방안을 제언한다. 1) 생석회를 현장에서 피우는 과정에서 발생하는 품질의 균일성에 관한 문제점을 보완하기 위해서는 강회다짐용 재료로 순도 높은 소석회를 사용하는 것이 바람직하다. 2) 강회시공시 발생하는 품질의 불균일성을 고려하여 균일한 혼합을 위한 믹서, 계량시의 오차를 줄이기 위한 Premix형태의 강회다짐재 및 다짐작업의 균일성을 확보하기 위한 다짐기계의 사용을 적극적으로 검토하여야 한다. 3) 지붕 강회다짐충의 해체 및 시공시 추가적인 구조물의 손상을 방지하기 위해서 적절한 가설구조물의 사용을 의무화 하여야 한다. 4) 문화재 수리 표준 품셈과 문화재 수리 표준 시방서에 규정된 재료 및 시공절차에 관한 내용을 구체적이고 명확히 규정할 필요성이 있다.

• 한국응용과학기술학회지
• /
• 제25권3호
• /
• pp.322-331
• /
• 2008

In order to synthesize high-solid coatings, acrylic resins (HSAs) containing 90% solid content were first synthesized, then the synthesized HSAs were cured with a curing agent, isocyanate, at room temperature to obtain high-solid coatings. In the HSAs synthesis, conversion was in a range of $82{\sim}87%$, and viscosities and number-averaged molecular weight ($M_n$) of the HSAs were in a range of $4380{\sim}8010$ cP and $1540{\sim}1660$, respectively. From the correlation between $T_g$ value, viscosity and $M_n$, it was found that, with increasing $T_g$ value, viscosity increases rapidly and molecular weight increases slowly. From the visco-elasity measured by the pendulum method, it was found that the curing time decreased with increasing $T_g$ values. From the tests of physical properties of the coatings' film, $60^{\circ}$ specular gloss, impact resistance and heat resistance were proved to be good and pencil hardness, drying time and pot-life were proved to be poor.

• 대한골관절종양학회지
• /
• 제4권2호
• /
• pp.81-87
• /
• 1998

Although autoclaved autogenous bone reconstruction is one of the established procedures, it may have some problems in bone regeneration and mechanical property. The purpose of this study is to evaluate the efficacy of more biologic and anatomical reconstruction where allograft is not readily available. From Aug.1991 to Feb. 1996 the authors analyzed 32 cases of reconstruction with autogenous low heat treated bone. Autogenous graft sites were humerus 4, tibia 4, pelvis 9, and 15 femur. Average follow-up period was 23(range;12-51) months. There were 49 graft-host junctional sites. Diaphysis was 22, metaphysis 10, and flat bone 17. Average duration of healing for the 38 united sites was 7 months. Average union time for each anatomical area 8 months in 19 diaphysis, 12 months in 7 metaphysis, and 12.7 months in 12 flat bone(pelvis). Eleven nonunion sites consisted of 3 diaphysis(3/22), 3 metaphysis(3/10), and 5 flat bone(5/17). Complications other than nonunion were local recurrence(4), bone resorption(3), graft fracture(2), osteomyelitis(1), metal failure(2), and wound infection(1). Initial bone quality and stable fixation technique was important for union rate. Plate and screw is a good method for diaphyseal lesion. Metaphyseal and flat bone are weak area for rigid fixation and one stage augmentation with iliac bone graft can be a salvage procedure.

• 한국식품조리과학회지
• /
• 제32권4호
• /
• pp.524-530
• /
• 2016

Purpose: The properties of starch and starch gel prepared from a newly inbred sweet potato, Daeyumi were compared to the properties of starch and starch gel prepared from Sinyulmi which is a well known mealy type sweet potato. Methods: The starch was isolated by using the alkaline steeping method. Physicochemical, pasting, and thermal properties, and crystallinity were measured. The texture properties of starch gel (10%, w/w) were examined. Results: The amylose contents of Daeyumi and Sinyulmi starches were 25.57% and 22.59%, respectively. The initial pasting temperature of Daeyumi starch was significantly higher than that of Sinyulmi starch (p<0.05), but other paste viscosities were not different. The peak and conclusion temperatures of Daeyumi starch were higher than those of Sinyulmi starch by differential scanning calorimetry. The shape of Daeyumi starch gel was more clear and rigid than the shape of Sinyulmi starch gel. The surface and the upper side of Daeyumi starch gel were smoother than the surface and the upper side of Sinyulmi starch gel. Hardness and gumminess were higher in Daeyumi starch gel than in Sinyulmi starch gel. The crystallinity types of Daeyumi and Sinyulmi starches were $C_b$ and A types, respectively, but starch gels showed an amorphous type. Conclusion: Therefore, it is suggested that Daeyumi starch would have better physicochemical properties and higher quality of starch gel than Sinyulmi starch.

• 폴리머
• /
• 제33권4호
• /
• pp.364-370
• /
• 2009

본 연구에서는 ETSO-DDM(epoxy terminated siloxane-diaminodiphenylmethane) 복합 경화제상 siloxane 함량 변화에 따른 bisphenol계 레진(BPH)과의 경화 특성 변화와 이에 따른 기계적 특성 변화를 고찰해 보았다. ETSO-DDM/BPH 복합재료의 경화 특성 변화는 DSC를 통해 관찰하였으며, 만능 물성기의 인장 시험과 굴곡 시험을 통해 기계적 특성 변화를 측정하였다. ETSO-DDM/BPH 시스템의 경화 활성화 에너지는 ETSO의 함량이 감소함에 따라 지속적으로 증가하는 경향을 보였다. 이는 ETSO 함량이 감소함에 따라 합성된 ETSO-DDM 공단량체의 사슬길이가 짧아지게 되고 이로 인해 ETSO-DDM/BPH간의 가교거리 역시 짧아지게 되어 결국 가교밀도를 증가시켰기 때문으로 판단된다. ETSO 함량이 감소할수록 인장강도, 인장탄성률, 굴곡강도 및 굴곡탄성률 등의 기계적 특성은 증가를 보이는데 이는 짧은 사슬길이의 ETSO-DDM 공단량체가 rigid한 구조를 형성하여 공간상 존재하는 분자구조의 에너지 상태가 최소가 되도록 packing하였기 때문으로 사료된다.

• 한국세라믹학회지
• /
• 제37권4호
• /
• pp.354-358
• /
• 2000

Tetragonal (t)-ZrO2/Al2O3 composites doped with Y2O3, Nb2O5, and Fe2O3 ((Y, Nb, Fe)-TZP/Al2O3) were prepared over the range containing Fe2O3 from 0.1 to 0.5 mol% with 0.1 mol% intervals to evaluate the effect of Fe2O3 addition on chromaticity, hydrothermal stability, and mechanical property of the composites. After autoclaving for 20 h at 18$0^{\circ}C$ under 3.5 MPa water vapor pressure, no tlongrightarrowm phase transformation was observed probably due to the preferential solid solubility of Fe2O3 in Al2O3, the presence of the rigid Al2O3 particles, and the inherent phase stability of (Y, Nb)-TZP. The optimized strength and the fracture toughness of the composite were 700 MPa and 8.5 MPa.m1/2, respectively, when 0.1 mol% Fe2O3 was added. The composites have shown a gradual color change from a slightly white ivory to a pale yellowish brown with increasing the Fe2O3 concentration.

• Nuclear Engineering and Technology
• /
• 제5권3호
• /
• pp.223-233
• /
• 1973

고준위 gamma선량 측정에 사용할 목적으로 시중에서 판매되고 있는 32종의 국산 plastic film을 수집하여 gamma선량계로서의 효용성 판단기준이 되는 gamma선에 대한 반응도 및 온도효과 등을 조사하였다. Co-60 gamma선을 이용한 실험결과에 의하면 럭키화학회사 제품인 0.06mm두께의 경질 PVC film이 선량계로서 사용하기에 가장 적합한 것 같았다. 3100$\AA$파장에서 측정한 이 PVC film의 optical density는 0.6$\times$$10^{6}$R으로부터 1.3$\times$$10^{7}$ R까지의 구간에서 조사선량에 따라 비례하여 변했으며 표준실첨조건하에서 9%이내의 재현성을 보여 주었다. 한편 흡수선량, 주위 대기중의 산소함량 및 방사선 조사시의 온도효과 등을 조사한 결과 실용적인 관점에서 가장 좋은 특성을 나타냈다.

• 한국물환경학회지
• /
• 제38권3호
• /
• pp.143-149
• /
• 2022

Membrane distillation (MD) has emerged as a sustainable desalination technology to solve the water and energy problems faced by the modern society. In particular, the surface wetting properties of the membrane have been recognized as a key parameter to determine the performance of the MD system. In this study, a novel surface modification technique was developed to induce a Janus-type hydrophilic/hydrophobic layer on the membrane surface. The hydrophilic layer was created on a porous PVDF membrane by vapor phase polymerization of the pyrrole monomer, forming a thin coating of polypyrrole on the membrane walls. A rigid polymeric coating layer was created without compromising the membrane porosity. The hydrophilic coating was then followed by the in-situ growth of siloxane nanoparticles, where the condensation of organosilane provided quick loading of hydrophobic layers on the membrane surface. The composite layers of dual coatings allowed systematic control of the surface wettability of porous membranes. By the virtue of the photothermal property of the hydrophilic polypyrrole layer, the desalination performance of the coated membrane was tested in a solar MD system. The wetting properties of the dual-layer were further evaluated in a direct-contact MD module, exploring the potential of the Janus membrane structure for effective and low-energy desalination.