• 한국유체기계학회 논문집
• /
• 제18권6호
• /
• pp.5-11
• /
• 2015

In a pressurized water reactor (PWR), control rod assembly (CRA) falls into the guide tubes of a fuel assembly due to gravity for scram. Various theoretical approaches and numerical analyses have been performed because its shape is simple and its design was completely developed several decades ago. A control rod assembly for a sodium-cooled faster reactor (SFR) which is geometrically more complicated is being actively developed in Korea nowadays. Drop time and impact velocity of a CRA are important parameters with respect to reactivity insertion time and the mechanical robustness of a CRA and a guide duct. In this paper, computational method considering simultaneously the equation of motion for rigid body and the Navier-Stokes equations for fluid is suggested and verified by comparison with theoretical analysis results. Through this valuable CFD analysis method, drop time and impact velocity of initially designed SFR CRA are evaluated before performing scram tests with it.

• Coupled systems mechanics
• /
• 제3권2호
• /
• pp.147-170
• /
• 2014

In the recent times, dimensions of heavy load carrying vehicle have changed significantly incorporating structural flexibility in vehicle body. The present paper outlines a procedure for the estimation of bridge response statistics considering structural bending modes of the vehicle. Bridge deck roughness has been considered to be non homogeneous random process in space. Influence of pre cambering of bridge surface and settlement of approach slab on the dynamic behavior of the bridge has been studied. A parametric study considering vehicle axle spacing, mass, speed, vehicle flexibility, deck unevenness and eccentricity of vehicle path have been conducted. Dynamic amplification factor (DAF) of the bridge response has been obtained for several of combination of bridge-vehicle parameters. The present study reveals that flexible modes of vehicle can reduce dynamic response of the bridge to the extent of 30-37% of that caused by rigid vehicle model. However, sudden change in the bridge surface profile leads to significant amount of increment in the bridge dynamic response even if flexible bending modes remain active. The eccentricity of vehicle path and flexural/torsional rigidity ratios plays a significant role in dynamic amplification of bridge response.

• 한국해안해양공학회지
• /
• 제7권1호
• /
• pp.108-115
• /
• 1995

본 논문에서는 충격파력을 받는 케이슨 방파제의 동적거동해석 모델에 대해서 연구하였다. 케이슨 구조는 강체로 가정하였으며, 기초사석 및 지반은 반무한탄성지반이론에 의거하여 가상 부가질량, 스프링 및 감쇠계수로 이상화하였다. 주파수 의존 유체의 부가질량 및 감쇠계수는 시간기억함수와 무한대 주파수에 대한 부가질량으로 나타내었다. 또한, 케이슨의 영구적 활동을 모의하기 위하여 수평방향의 스프링을 형성거동을 하는 비선형 스프링으로 모형화하였다. 수리실험치와 비교결과, 본 모델은 상당히 좋은 결과를 줌을 알 수 있었다. 케이슨의 동적 거동에 영향을 주는 주요 인자의 변화에 따른 민감도 해석을 수행하였으며, 케이슨의 영구적 활동거리 및 한계중량 예측에의 적용성조사를 위한 수치실험도 병행하였다.

• Journal of Electrical Engineering and information Science
• /
• 제1권2호
• /
• pp.77-86
• /
• 1996

In this paper we deal with the problem of recovering 3-D motion and structure from a time-varying 2-D velocity vector field. A great deal has been done on this topic, most of which has concentrated on finding necessary and sufficient conditions for there to be a unique 3-D solution corresponding to a given 2-D motion. While previous work provides useful theoretical insight, in most situations the known algorithms have turned out to be too sensitive to be of much practical use. It appears that any robust algorithm must improve the 3-D solutions over time. As a step toward such algorithm, we present a method for recovering 3-D motion and structure from a given time-varying 2-D velocity vector field. The surface of the object in the scene is assumed to be locally planar. It is also assumed that 3-D velocity vectors are piecewise constant over three consecutive frames (or two snapshots of flow field). Our formulation relates 3-D motion and object geometry with the optical flow vector as well as its spatial and temporal derivatives. The linearization parameters, or equivalently, the first-order flow approximation (in space and time) is sufficient to recover rigid body motion and local surface structure from the local instantaneous flow field. We also demonstrate, through a sensitivity analysis carried out for synthetic and natural motions in space, that 3-D motion can be recovered reliably.

• 한국자동차공학회논문집
• /
• 제3권1호
• /
• pp.33-44
• /
• 1995

As the occupant safety receives more attention from automobile industries. protection systems have been developed quite well. Developed protection systems must be evaluated through real tests in crash environment Since the real tests are extremely expensive. computer simulations are replaced for some prediction of the real test In the computer simulation. it is very crucial to express the real environment precisely in the modeling precess. The energy absorbing(EA) steering system has a very important rote in vehicle crashes because the occupant can hit the system directly. In this study. the EA steering system is modeled precisely. analyzed for the safely and designed by an optimization technology. First. the EA steering system is disassembled by parts and modeled by segments and joints. The segments are modeled by rigid bodies in motion and they have resistances in contact. Spring-damper elements and force-deflection curves are utilized to represent the joints. The body block test is cal lied out to validate. the modeling. When the test results are not enough for the detailed modeling. the differences between tests and simulations are minimized to calculate unknown parameters using optimization. The established model is applied to a crash simulation of a full-car model and tuned again. After the modeling is finished. components of the steering system are designed by an optimization algorithm. In the optimization process. the compound injury of a driver is defined and minimized to determine the chracteristics of the components. The second. order approximation algorithm has been adopted for the optimization.

• 한국정밀공학회지
• /
• 제28권3호
• /
• pp.292-300
• /
• 2011

Control systems in machinery equipment provide correction signals to motion units in order to reduce or cancel out the mismatches between sensor feedback signals and command or desired values. In this paper, we introduce a simulator for control characteristics of machinery equipment. The purpose of the simulator development is to provide mechanical system designers with the ability to estimate how much dynamic performance can be achieved from their design parameters and selected devices at the designing phase. The simulator has a database for commercial parts, so that the designers can choose appropriate components for servo controllers, motors, motor drives, and guide ways, etc. and then tune governing parameters such as controller gains and friction coefficients. The simulator simulates the closed-loop control system which is built and parameter-tuned by the designer and shows dynamic responses of the control system. The simulator treats the moving table as a 6 degrees-of-freedom rigid body and considers the motion guide blocks stiffness, damping and their locations as well as sensor locations. The simulator has been under development for one and a half years and has a few years to go before the public release. The primary achievements and features will be presented in this paper.

• 한국지진공학회논문집
• /
• 제8권5호통권39호
• /
• pp.1-14
• /
• 2004

본 연구는 우리나라에서 저층 주거용 건물로 널리 사용되고 있는 2층 규모의 비보강조적조 의 1/3 축소 모델에 대한 진동대 실험을 수행한 것이다. 본 연구의 주목적은 내진설계가 이루어지지 않은 조적조 건물의 내진거동을 살펴보고, 실험적 자료를 확보하는데 있다. 실험대상구조물은 횡방향으로는 대칭이지만 종방향으로는 약간 비대칭이고, 비교적 강한 다이어프램을 나타내는 콘크리트 슬래브로 되어있다. 실험체에 대한 모의 지진하중은 가속도를 점차 증가시켜가면서 종방향으로 가력하였다. 실험에서 얻은 구조물의 동적 응답자료는 진동대의 입력지진과 연관지어서 분석하였다. 더욱이 성능기초설계를 위한 성능수준을 제시하였다. 실험결과 1층에서의 전단파괴가 지배적이고 상부층은 강체거동을 보여주었다. 또한 균열 발생후에도 상당한 강도와 변형능력을 보유하고 있는 것으로 나타났다.

• 정보처리학회논문지B
• /
• 제13B권1호
• /
• pp.15-20
• /
• 2006

이 논문은 컴퓨터 게임을 위한 물리 엔진의 성능 향상 및 이를 적용한 지능적인 게임 캐릭터에 관한 연구를 서술한다. 물리적 상황을 자동으로 인식하는 알고리즘으로는 Momentum back-propagation을 적용하였다. 또한 우리는 각 상황에 따른 적분 방식의 실험 결과를 제시한다. 실험을 위하여 Euler Method, Improved Euler Method, 및 Runge-kutta Method의 세 가지의 적분 방식을 적용하였다. 각 적분 방식의 실험 결과에서 충돌이 없는 상황에서는 Euler Method가 최적의 성능을 보여주었다. 또한 충돌 상황에서는 세 가지 방식이 모두 비슷한 성능을 보여주었지만, Runge-kutta Method가 최적의 정확도를 보여주었다. 물리 상황인식에 대한 실험결과에서는 입력 층과 출력 층이 고정된 상태에서 은닉 층이 3일 때 가장 좋은 성능을 보여주었고, 또한 학습횟수가 30000일 때 최적의 성능을 보여주었다. 앞으로 우리는 다른 장르의 게임에 이러한 물리적 컨텍스트(context)를 인식하는 연구를 진행할 것이며 또한 전체 게임의 성능을 증가할 수 있도록 M-BP이외의 인식 알고리즘을 적용할 것이다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.311-314
• /
• 2006

This paper concerns about total dynamic analysis of integrated mining system. This system consists of vertical steel pipe, intermediate buffer station, flexible pipe and self-propelled miner. The self-propelled miner and buffer are assumed as rigid-body of 6-dof. Discrete models of vertical steel pipe and flexible pipe are adopted, which are obtained by means of lumped-parameter method. The motion of mining vessel is not considered. Instead, the motion of mining vessel is taken into account in form of various boundary conditions (e.g. forced excitation in slow motion and/or fast oscillation and so on). A terramechanics model of extremely soft cohesive soil is applied to the self-propelled miner. The hydrodynamic forces and moments are included in the dynamic models of vehicle and lifting pipe system. Hinged and fixed constraints are used to define the connections between sub-systems (vertical steel pipe, buffer, flexible pipe, miner). Equations of motion of the coupled model are derived with respect to the each local coordinates system. Four Euler parameters are used to express the orientations of the sub-systems. To solve the equations of motion of the total dynamic model, an incremental-iterative formulation is employed. Newmark-b method is used for time-domain integration. The total dynamic responses of integrated mining system are investigated.

• 한국전산구조공학회논문집
• /
• 제15권4호
• /
• pp.619-628
• /
• 2002

본 논문은 배플을 설치한 수평으로 놓인 원통형 탱크내 슬로싱 고유진동에 대한 유한요소 해석을 다룬다. 지배방정식으로 포텐셜 이론을 기반으로 한 라플라스 방정식을 적용한다. 이 문제를 선형의 등매개 요소를 적용한 유한요소법을 이용해 해석한다. 탱크와 배플은 강체로 가정하였으며, 배플의 효과 구현은 배플의 설치 위치에 절점을 두 개로 분리함으로써 얻을 수 있다. 고유주파수와 고유모드의 추출을 위하여 Lanczos 변환법 및 Jacobi 반복법을 도입하였다. 종진동과 횡진동 모드에 대한 수치 해석결과가 참고 문헌과 비교해 볼 때 잘 일치함을 알 수 있었다. 또한 유체 높이, 배플 개수, 내공 크기, 배플 위치 등의 파라메트릭 해석을 통하여 슬로싱 특성 및 링형 배플의 영향을 고찰하였다.