• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.5
• /
• pp.475-480
• /
• 2012

This study on the methode is easied to distinguish with emotional visual lighting on AtoN facility using 3colors LED, and which is controlled to on-off switching of approach light in shore or harbor. The identification have easied to provide a differentiation between the AtoN facility of red and white light and surrounding light in harbor both sides. And the integrated controller have designed to left-right and serial sequential lighting system for harbor guidance using the GPS synchronous or timer. There is expectation effect that is prevent a confusion about distinguish of facility by ship's operator and to beautify a night scene of harbor, which is expressed to emotional identification lighting and variable color lighting on AtoN body by vertical layer color lighting using LED. In addition, the performance of AtoN is implemented to display with guidance light the harbor safety message by morse code lighting. Effectiveness of system is enhanced that age and power consumption reduce by candle alternated high light LED.

• Investigative Magnetic Resonance Imaging
• /
• v.24 no.3
• /
• pp.95-122
• /
• 2020

In this article, we evaluated the performance of radiofrequency (RF) coils in terms of the signal-to-noise ratio (S/N) and homogeneity of magnetic resonance images when used for ultrahigh-frequency (UHF) 7T magnetic resonance imaging (MRI). High-quality MRI can be obtained when these two basic requirements are met. However, because of the dielectric effect, 7T magnetic resonance imaging still produces essentially a non-uniform magnetic flux (|B₁|) density distribution. In general, heterogeneous and homogeneous RF coils may be designed using electromagnetic (EM) modeling. Heterogeneous coils, which are surface coils, are used in consideration of scalability in the |B₁| region with a high S/N as multichannel loop coils rather than selecting a single loop. Loop coils are considered state of the art for their simplicity yet effective |B₁|-field distribution and intensity. In addition, combining multiple loop coils allows phase arrays (PA). PA coils have gained great interest for use in receiving signals because of parallel imaging (PI) techniques, such as sensitivity encoding (SENSE) and generalized autocalibrating partial parallel acquisition (GRAPPA), which drastically reduce the acquisition time. With the introduction of a parallel transmit coil (pTx) system, a form of transceiver loop arrays has also been proposed. In this article, we discussed the applications and proposed designs of loop coils. RF homogeneous coils for volume imaging include Alderman-Grant resonators, birdcage coils, saddle coils, traveling wave coils, transmission line arrays, composite right-/left-handed arrays, and fusion coils. In this article, we also discussed the basic operation, design, and applications of these coils.

• Safety and Health at Work
• /
• v.13 no.3
• /
• pp.294-301
• /
• 2022

Background: In the early stage of the coronavirus disease 2019 (COVID-19) epidemic, small- and midsized enterprises (SMEs) may be an important transmission consideration. The study aimed to identify the pattern of COVID-19 prevention measures during the outbreaks in Daegu and Gyeongsangbuk-do at the early stage of COVID-19. Moreover, we investigated whether SME size and past experiences affected the preventive measures implemented in the region. Methods: A survey detailing the general characteristics and implementation of 12 preventive activities was conducted in 122 SMEs in Daegu and Gyeongsangbuk-do. The survey was analyzed by size and operation period. Results: The study subjects consisted of 53 (43.4%) workplaces with 1-5 employees, 50 (40.9%) workplaces with 6-30 employees, and 19 (15.6%) workplaces with 31-49 employees. The lowest three items among those surveyed were 'symptomatic workers to stay home for 3-4 days' (17.2%), 'work remotely' (18.9%), and 'video meetings' (20.5%). There were significant differences in the rate of several preventive measures implemented. The larger sized SMEs, the higher the number of implementations (p < 0.01). The operation period had no significant relationship with the implementation of preventive measures. The same pattern was observed in multiple generalized linear regression with covariate adjustment. Conclusion: Preventive measures among SMEs with fewer than 50 employees were identified. Even within SMEs, a gap in preventive measures according to size was confirmed. To prevent the spread of infection and protect workers' right to health, different support for different sized SMEs is necessary.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.3
• /
• pp.149-163
• /
• 2004

This study analyzed kinematic variables about the cross step, the delivery and the release for women's javelin athletics recorded over 50m in the 2004 Busan International Athletics Competition. It was used the Kwon3D Motion Analysis Package Ver. 3.1 Program(Kwon, 2000) for analysing the kinematic variables about the distance, the velocity, and the angle, then we had the results as follows; 1 In the Cross step phase, the COG velocity was low because their step length was short. To keep the CM velocity from the approach to the last cross over step contact, the athletes have to keep the longer step length within about 130% of the athletics' height. 2. In the Delivery phase, the athletics' COG height was gradually lower, and the deceleration of the COG was going up. As the same in the cross step, Therefore the athletes have to increase the step length within about 100% of their height, in order to increasing the COG velocity. And it was shown they have to make small angle of the elbow as possible from the right foot contact to the left foot contact in order to being the big acceleration of the upperarm at the release phase. 3. In the release phase, it was shown to being low position of the release point as the COG was low and then the release velocity of the upperarm was low. Specially when the shoulder lean lateral angle is big at the release phase, it was shown they have a excessive release angle. And, when it was shown the high rotation angle of the shoulder, the shoulder was opened forward bigger than the trunk was opened forward. So the transmission of velocity from the proximal segments was a fast change.

• Journal of Broadcast Engineering
• /
• v.18 no.5
• /
• pp.680-690
• /
• 2013

In this paper, we propose a real-time temporal synchronization and compensation algorithm in stereoscopic video. Many temporal asynchronies are caused in the video editing stage and due to different transmission delays. These temporal asynchronies can degrade the perceived 3D quality. The goal of temporal alignment is to detect and to measure the temporal asynchrony and recover synchronization of the two video streams. In order to recover synchronization of the two video streams, we developed a method to detect asynchronies between the left and the right video streams based on a novel spatiogram information, which is a richer representation, capturing not only the values of the pixels but their spatial relationships as well. The proposed novel spatiogram additionally includes the changes of the spatial color distribution. Furthermore, we propose a block-based method for detection of the pair frame instead of one frame-based method. Various 3D experiments demonstrate the effectiveness of the proposed method.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.12
• /
• pp.39-44
• /
• 2010

In LTE-Advanced systems, every sector uses the entire range of the frequency resource, and when the UEs are located at a cell edge, user throughputs degrade due to the interferences from the adjacent cells. In this paper, we propose a combined scheme for inter-cell interference avoidance and power control. In the proposed algorithm, the sectors consist of the right edge, the left edge and the center for resource allocation and we control the transmission power to improve the user throughputs at the edge of each cell. Using a system level simulation, we analyze low 5th percentile and average user throughputs of the UEs who are located the cell, center and edge when the inter-cell interference avoidance and the power control are combined.

• Conservation Science in Museum
• /
• v.18
• /
• pp.77-92
• /
• 2017

This study is based on a scientific analysis of the production method of the wooden seated Bodhisattva statue from Gwaneumsa Temple in Wando, which is currently housed at Chonnam National University Museum. The purpose was to investigate the characteristics of the statue's production through an X-ray inspection of the wooden timbers that make up its base material, a composition analysis of the surface layers, and microscopic observation. The votive prayers found together with the statue allowed the precise dating of the artifact to the sixteenth century, during the Joseon Dynasty. The X-ray transmission identified the statue as being made using the "ilmokjo"(一木造) technique, which means that the entirety of the statue excluding the right hand was produced using a single block of wood. The specimen analysis of the naturally exfoliated surface layer revealed that the current surface was coated with brass to restore the original gilt layer. These research findings added an interesting case to the existing related research and reaffirmed the academic value of this statue.

• Elastomers and Composites
• /
• v.54 no.2
• /
• pp.110-117
• /
• 2019

The characterization of the ozone oxidation for raw natural rubber (NR) was investigated under controlled conditions through image and fourier transform infrared (FT-IR) analysis. The ozone oxidation was performed on a transparent thin film of raw NR coated on a KBr window in a dark chamber at $40^{\circ}C$ under low humidity conditions to completely exclude thermal, moisture, or light oxidation. The ozone concentration was set at 40 parts per hundred million (pphm). Before or after exposure to ozone, the image of the thin film for raw NR was observed at a right or tilted angle. FT-IR absorption spectra were measured in the transmission mode according to ozone exposure time. The ozone oxidation of NR was determined by the changes in the absorption peaks at 1736, 1715, 1697, and $833cm^{-1}$, which were assigned to an aldehyde group (-CHO), a ketone group (-COR), an inter-hydrogen bond between carbonyl group (-C=O) from an aldehyde or a ketone and an amide group (-CONH-) of protein, and a cis-methine group ($is-CCH_3=CH-$, respectively. During ozone exposure period, the results indicated that the formation of the carbonyl group of aldehyde or ketone was directly related to the decrement of the double bond of cis-1,4-polyisoprene. Only carbonyl compounds such as aldehydes or ketones seemed to be formed through chain scission by ozone. Long thin cracks with one orientation at regular intervals, which resulted in consecutive chain scission, were observed by image analysis. Therefore, one possible two-step mechanism for the formation of aldehyde and ketone was suggested.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.8
• /
• pp.2158-2170
• /
• 1999

It has been required more reliable communication on processes and improvement of system performance as distributed systems using multicast protocol became widespread. In distributed environment maintaining data consistency through asynchronous execution of processes and coordinating the activities of them would occurs. This paper proposes a total ordering algorithm, TORMP, in order to resolve these problems. TORMP takes advantage of multicast protocol and uses an effective token passing method. It reduces a process delaying time before transmitting its message by multicasting a token simultaneously to every process that initiates the request of the message. Moreover, the processes receiving the token start multicasting the message at the same time, which causes to cut down the overall transmission dely. In case that one process sends a message, TORMP hardly uses the procedure of controlling for ordering. It gives fairly the right of sending messages to all processes in a group with utilizing vector clock. In TORMP, unlike other algorithms, the number of packets generated during ordering process does not depend on the number of processes.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.2
• /
• pp.85-89
• /
• 2011

In this paper, a novel Class-E power amplifier using metamaterials has been realized with one RF LDMOS diffusion metal-oxide-semiconductor field effect transistor. The CRLH structure can lead to metamaterial transmission line with the Class-E power amplifier tuning capability. The CRLH TL is achieved by the frequency offset and the nonlinear phase slope of the CRLH TL for the matching network of the power amplifier. Also, the proposed power amplifier has been realized by using the CRLH structure in the output matching network for better efficiency. Operating frequencies are chosen at 13.56 MHz in this work. The measured results show that the output power of 39.83 dBm and the gain of 11.83dB was obtained. At this point, we have obtained the power-added efficiency (PAE) of 73 % at operation frequency.