• Journal of the Korean Data and Information Science Society
• /
• v.22 no.3
• /
• pp.515-521
• /
• 2011

There are increasing demands for the producing and breeding new domestic riding horses for the vitalizations of horse riding industry in Korea, according as 'Horse Industry Support Act' became. In this study, we were to develop the functional relation through the conformation comparison & body composition analysis. 76 heads of 5 breeds utilized for riding horses in Korea were used and their body measurements on 12 items were measured and cluster analysis was conducted to determine the correlation relation among them. The measurements were standardized that (height, croup height, pelvis length), and (hip width, width of pelvis) were highly correlated. In these results of the decision tree, we confirmed to classify the breed type determination by their body measurements (hip height, hip width, head length, croup height). This result can be used as basic data for the development of horse type determination (racing, riding, Riding for the Disabled, Working, or fattening) through the analysis of body composition, and be utilized as the basic data for the producing and breeding new domestic riding horses through the 3D Stereosocpic image system analyze.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.12 no.1
• /
• pp.1-9
• /
• 2018

This study is intended to identify how horseback riding affect the bone density of the elderly. A total of 31 normal senior citizens participated in the research, who were randomly divided into two groups: 15 in horseback riding exercise group and 16 in horseback riding machine exercise group. A horseback riding exercise program was carried out for 25 minutes twice a week for 12 weeks. A pre-test was conducted before starting the program and two post-tests were conducted 6 weeks and 12 weeks after exercises in the same way as the pre-test. Measured items were bone density of lumbar vertebrae and femur. In order to identify the changes in measurement variables before exercises and 6 weeks and 12 weeks after exercises, two-way repeated analysis of variance were used. The comparison of changes in the bone density in both groups revealed that there were significant differences in lumbar vertebrae L3, L4, femur trochanter in both groups over time. This study suggests that three-dimensional movements of horses through horseback riding exercises induce normal movements of senior citizens, providing positive effects on their bone density. If appropriate horse riding exercise programs are used considering the health status, time and economic conditions, and preferences of senior citizens, it would improve their quality of life.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2001.10a
• /
• pp.52.2-52
• /
• 2001

• Journal of the Korean Institute of Oriental Medical Informatics
• /
• v.21 no.1
• /
• pp.23-34
• /
• 2015

This study is aimed to verify what effects horseback riding has in treating hospitalized patients with low back pain in the Korean medicine hospital. The method of this study is choosing 31 people among hospitalized male and female patients whose chief complaints were low back pain in 2 Korean medicine hospital in Gyeonggi Province. 14 people who agreed to take horseback riding treatment were classified into experimental group and 17, the rest of the people, were classified into control group. Both experimental group and control group were treated with Korean medicine. In addition, only experimental group performed horseback riding program. Changes of temperature difference by digital infrared thermal imaging(DITI), sit and reach test and visual analogue scale(VAS) survey were used as measuring tools. IBM SPSS Statistics 21 was used in processing statistics. Mean ${\pm}$standard deviation was indicated down to two places of decimals and the level of significance was judged as p<0.05. The summary of this study's result is as in the following. First of all, the meaningful difference was shown in the experimental group but not in the control group in the difference of temperature between Yintang and Kwanwon(the difference between up and down). Secondly, there were significant difference in the experimental group which performed horseback riding treatments but not in the control group resulting from examining the change of temperature difference between left and right Yongchon. Thirdly, there were significant difference between experimental and control group in the change of sit and reach. Especially, the change was much more in experimental group. As known from the results above, patients who only were treated with Korean medicine relieved low back pain, reordered pelvis and improved the motor ability. However, the group which carried out horseback riding at the same time reordered pelvis and improved the motor ability more obviously.

• 재활복지
• /
• v.21 no.3
• /
• pp.147-163
• /
• 2017

The purpose of this study was to examine how horse-riding exercise would be effective on the stroke patients' muscle thickness of lower extremity. The 30 stroke patients who were hospitalized in a hospital located in G metropolitan city were selected for this study. These subjects were randomly placed in a horse-riding exercise group (n=15) and a control group (n=15). The horse-riding exercise group received three 20-minute exercises a week for a total of 6 weeks. An ultrasound imaging equipment was used to measured The thicknesses of the rectus femoris (RF), tibialis anterior (TA), medial gastrocnemius (MG), and gluteus medius (GM). After the completion of a 6-week exercise program, same measurement was conducted for all study subjects. The data were analyzed using a paired t-test and independent t-test to determine the statistical significance. As a result, muscle thickness was significantly differentiated before and after the intervention in each group. The thicknesses of all the four muscles significantly increased after exercise in the horse-riding exercise group. The thicknesses of the RF, GM, and TA significantly increased after exercise in the control group. In conclusion, horse-riding exercise increased the thickness of the lower extremity skeletal muscles by stabilizing the knees and activating the extensor muscles of the lower extremities.

• Journal of Biosystems Engineering
• /
• v.43 no.4
• /
• pp.285-295
• /
• 2018

Purpose: The aim of this study is to develop a three-wheel riding cultivator for improving the performance of the current four-wheel riding cultivators in the market. Methods: A prototype three-wheel riding cultivator with the rated power of 15.5-kW, a primary hydrostatic and a two-speed selective gear transmission shifts, front/rear three-wheel drive, a hydraulic wheel tread adjustment, and the mid-section attachment of the major implements was designed and constructed. Its specifications and basic performance are investigated. Results: The maximum speeds of the prototype at the low and high stages were measured to be approximately 7.31, and 11.29 km/h in forward travel, respectively, and approximately 3.60, and 6.37 km/h in rearward travel, respectively. The minimum ground clearance is shown to be 670 mm. The rotating speeds of the power takeoff (PTO) shaft at the low and high stages are shown to be approximately 795 and 1,140 rpm, respectively. The tread of the rear wheels, the minimum radius of turning, and the maximum lifting height of the parallel link device are measured to be within 1,320-1,720 mm, 2.80 m, and 390 mm, respectively. Approximately 25.3% and 74.7% of the total weight of the prototype are distributed in the front and rear wheels on flat ground, respectively. When the tread of rear wheels increased from 1,320 to 1,720 mm, the left and right static lateral overturning angles increased from $33.4^{\circ}$ to $39.1^{\circ}$ and from $29.0^{\circ}$ to $36.1^{\circ}$, respectively. Conclusions: The prototype three-wheel riding cultivator showed a wide range of travel and PTO speeds, high minimum ground clearance, small minimum radius of turning, and easy control of the rear wheel tread. Further, the easy observation of cultivating operations by mid-mounting the implements can improve quality of work. Therefore, the prototype is expected to contribute to the riding mechanization of cultivating operations for various upland crops in Korea.

• Journal of Korean Neurosurgical Society
• /
• v.41 no.2
• /
• pp.141-144
• /
• 2007

A vertebral arte [VA] injury presents a difficult problem in atlantoaxial fixation. Recent technical reports described posterior C2 fixation using bilateral, crossing C2 laminar screws. The translaminar screw technique has the advantages of producing little risk of VA injury and the unconstrained screw placement. In addition, biomechanical studies have demonstrated the potential of the translaminar screw technique to provide a firmer construct that is equivalent to methods currently used. We report the successful treatment of C1-2 instability with a left-side high-riding VA. Because of the potential risk of VA injury, we performed a posterior C1-2 fixation with a combination of pedicle screws and a laminar screw in C2. We first placed bilateral C1 lateral mass screws and a right-side C2 pedicle screw. However, placement of the left- side C2 pedicle screw was technically difficult due to a narrow isthmus and pedicle. A laminar screw was inserted instead and authors believe that this posterior C1-C2 fixation with a combination of pedicle screws and a laminar screw in C2 can be a useful alternative technique for the treatment of C1-C2 instability in the presence of a unilateral high-riding VA.

• Asian-Australasian Journal of Animal Sciences
• /
• v.25 no.2
• /
• pp.200-206
• /
• 2012

The changes in physiologic parameters by swim exercise duration were examined in five female well-trained Jeju crossbred riding horses that had riding experience of more than three years without swim training experience. The horses were performed with swim exercise for 10 min (60.0 m/min) once a day for 14 days. Physiologic characteristics and haematic parameters were measured before swimming, immediately after swimming, and after a 10 min rest at first day ($D_0$), 7 days ($D_7$), and 14 days ($D_{14}$) of training. After 14 days of swim training, heart rate (p<0.05), blood glucose (p<0.05), lactate concentration (p<0.001), packed cell volume (p<0.01), and hemoglobin (p<0.01) measured immediately after swim and after 10 min rest showed significant lower values than those of $D_0$. The results illustrate the benefits of swim training for riding horses and the need for the establishment of swimming routines of appropriate duration and intensity to maximize the advantages of swim training.

• Journal of the Korean Society of Costume
• /
• v.60 no.5
• /
• pp.88-105
• /
• 2010

The purpose of this study is to grasp the actual wearing conditions, inconvenience and problems with cycle wear. To attain this purpose, a questionnaire was completed by direct observation and by interviewing bicyclists. The questionnaire was given to 273 bicyclists. The questionnaire consisted of items that are related to concerns with dressing appropriately and enhancement of physical performance through dress. Following are the results of this study. According to the survey, many of them purchased imported cycle wear rather than national cycle wear, and the satisfaction according with purchase rate was low. Bicyclists were uneasy with finding right size cycle wear especially for women. It turned out that the area of the knee and elbow are mostly the areas that they get hurt while riding. Even though the knee and elbow are the mostly hurt area, bicyclists do not prefer to wear appropriate protector for the knee and elbow to excel in their performance in cycling. In material related questions, lower dissatisfaction was indicated for the lints caused by fraction. Average satisfaction was indicated for the distortion after washing, changes in color, touch of the fabric, matters with static and sweat. With regard to the areas where the bicyclists felt discomfort was highly indicated with lower-body clothing. Discomfort was highly indicated with crotch area when riding long period of time. Also when riding a cycle, discomfort was indicated with the leggings cuffs when it comes upward with riding motion. Most of the bicyclists felt the tight fitting leggings were embarrassing.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.4
• /
• pp.530-541
• /
• 2008

The early stage of 3D anthropometry data has been used to obtain qualitative rather than quantitative information. However recent 3D body scanners as a common research tool for anthropormatric measurments have made it possible to obtain body surface data of sufficient resolution and accuracy. The purpose of this study is finally to develop motorcycle jacket for enhanced comfort and fit, to test the accuracy and reliability of 3D measurments of motorcycle riding posture, and to analyze the change in 20's adult male's body surface measurements between the standard anthropometric position and motorcycle riding posture. The results of this study were as follows: There were no significant differences between the study and Size Korea measurments in total traditional measuring items and most of measuring items, such as length, circumference antropometric items and interscye items though not waist back length and upper arm circumference. A comparison of 3D body surface measurments in the two different measuring postures, the bodysurface measurments such as waist front length, biacromion length, front interscye, arm length, underarm length in the motorcycle riding posture decreased than that in basic posture, whereas waist back length, back interscye, C.T.W length increased. The body surface measurments such as chest, bust, upper circumference in the motorcycle riding posture decreased than that in basic posture, whereas neck, waist, hip, elbow circumference increased.