• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.341-341
• /
• 2005

• Wind and Structures
• /
• 제13권1호
• /
• pp.37-55
• /
• 2010

In this paper South Africa is divided into strong wind climate zones, which indicate the main sources of annual maximum wind gusts. By the analysis of wind gust data of 94 weather stations, which had continuous climate time series of 10 years or longer, six sources, or strong-wind producing mechanisms, could be identified and zoned accordingly. The two primary causes of strong wind gusts are thunderstorm activity and extratropical low pressure systems, which are associated with the passage of cold fronts over the southern African subcontinent. Over the eastern and central interior of South Africa annual maximum wind gusts are usually caused by thunderstorm gust fronts during summer, while in the western and southern interior extratropical cyclones play the most dominant role. Along the coast and adjacent interior annual extreme gusts are usually caused by extratropical cyclones. Four secondary sources of strong winds are the ridging of the quasi-stationary Atlantic and Indian Ocean high pressure systems over the subcontinent, surface troughs to the west in the interior with strong ridging from the east, convergence from the interior towards isolated low pressure systems or deep coastal low pressure systems, and deep surface troughs on the West Coast.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 추계학술대회논문집
• /
• pp.149-152
• /
• 1999

The effect of initial orientation on the microstructure and texture evolution of two ferritic stainless steels was investigated. the columnar and equiaxed crystal specimens which were prepared from continuous casting slab were hot rolled annealed cold rolled and annealed respectively. The rolling and recrystallization textures at each process stage were examined by orientation distribution function (ODF) and electron back-scattered diffraction (EBSD); The observation showed that the orientation density of the $\alpha$-fibre of hot rolled band of columnar crystal specimen was more pronounced than that of the equaxed one at the center layer. Nevertheless the cold rolled textures of Type 430 steel have demonstrated a rather similar development . Compared to Type 430 steel the development of the $\alpha$-fibre in the center layer of Type 409L steel was much more pronounced. The relation between texture evolution and ridging behaviour has been discussed.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2004년도 춘계 학술대회지
• /
• pp.250-251
• /
• 2004

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2019년도 학술발표회
• /
• pp.24-24
• /
• 2019

This study investigates variations in the Western Pacific Subtropical High (WPSH) and its impact on South Korean precipitation in late summer during the period between 1958 and 2017. Composite analysis reveals that precipitation occurrence is directly linked to the displacement of the WPSH western ridge, a single, large-scale feature of the atmosphere in the Pacific Ocean. When WPSH ridging is located northwest (NW) of its climatological mean position, excessive precipitation is expected in late summer due to enhanced moisture transport. On the other hand, a precipitation deficit is frequently observed when the western ridge is located in the southeast (SE). Different phases of the WPSH are associated with lagged patterns of Pacific and Atlantic atmospheric and oceanic variability, introducing the potential to predict variability in the WPSH western ridge and its climate over northern East Asia by one month. Based on the identified SST patterns, a simple statistical model is developed and improvement in the ability to predict is confirmed through a cross-validation framework. Finally, the potential for further improvements in WPSH-based predictions is addressed.

• Journal of Biosystems Engineering
• /
• 제6권1호
• /
• pp.15-27
• /
• 1981

극소형(極小形) 동력경운기(動力耕耘機)(3.5PS:KC-450)의 포장작업성능(圃場作業性能)을 조사분석(調査分析)하고 이에 대(對)한 이용범위(利用範圍)를 결정(決定)하고저 1980년(年) 3월(月)부터 1980년(年) 10월(月)까지 안성읍(安城邑) 석정동(石井洞) 시험포장(試驗圃場)에서 8PS(DT-85), 5PS(DT-40) 경운기(耕耘機)와 대비(對比)하여 耕耘(경운), 쇄토(碎土), 배토작업(培土作業)에 대(對)한 포장작업성능(圃場作業性能)을 조사(調査) 분석(分析)한 결과(結果)를 종합(綜合)하면 다음과 같다. 변속단수별(變速段數別) 작업능률(作業能率)과 포장작업(圃場作業) 효율비교(效率比較) 시험(試驗)에서는 1. 작업속도(作業速度)가 0.9m/sec일때 KC-450기(機)의 이경작업능률(犁耕作業能率)은 125분(分)/10a 무료 DT-85기(機)보다 26분(分)/10a 정도(程度)낮았다. 2. 작업속도(作業速度)를 1m/sec로 이경작업(犁耕作業) 할때에 KC-45기(機)의 포장작업성능(圃場作業性能)은 82%로 DT-85기(機)보다 5% 높았다. 3. 동일(同一) 작업속도(作業遠度)의 쇄토작업(碎土作業)에 있어서 작업능률(作業能率)은 DT-40기(機)와 DT-85기(機)가 높았고 포장작업효율(圃場作業效率)은 KC-450기(機)와 DT-40기(機)가 높았다. 4. 동일(同一) 작업속도(作業遠度)의 배사작업(培士作業)에 있어서 공시기(供試機) 모두 작업능률(作業能率)은 별차이(別差異)가 없었고 포장작업효율(圃場作業效率)은 KC-450기(機), DT-40기(機), DT-85기(機)의 순(順)으로 높았다. 구획규모별(區劃規模別) 작업능력(作業能力) 비교(比較) 시험(試驗)에서는 5. 구획(區劃) 면적(面積)이 클수록 작업능률(作業能率)은 공(共)히 향상(向上)되나 구획면적(區劃面積)이 8a이하(以下)에서는 KC-450기(機)가 작업능력면(作業能力面)에서나, 포장효율면에서 보다 유리(有利)하였다. 작업심도별(作業深度別) 작업능률(作業能率)은 비교(比較) 시험(試驗)에서는 6. DT-85로는 심경(深耕)의 능률적(能率的)인 중작업(重作業)에 유리(有利)하였고 KC-450기(機)는 경심(耕深) 12cm의 모든 작업(作業)에서 운전조작(運轉操作)이 용이(容易)하고 포장작업효율(圃場作業效率)이 타기종(他機種)에 비(比)하여 높았다. 7. 이하(以下)의 결과(結果)로 KC-450기(機)는 채소원예(菜蔬園藝), 약초(藥草), 연초(煙草), 비닐하우스등(等)의 소구획(小區劃), 소규모(小規模) 농작업(農作業)에 신기종(新機種)으로 개발(開發)이 요망(要望) 된다고 사료(思料)된다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.281-285
• /
• 2008

Ferritic stainless steel is used for parts of exhaust system of commercial vehicle, because it has such advantages as low price and high corrosion resistant compared with austenite stainless steel. Even though ferritic stainless steel has these merits, to manufacture multi-layer bellows with complex geometry, austenite stainless steel is being used in the industry, because of it's high ductility. However, recently, the mechanical property of the ferritic stainless is getting improved and alternating austenitic stainless steel. In this paper, the possibility of mass production of bellows made of ferritic stainless steel like MH1 and 443CT is studied. Tensile test and ridging test are carried out to observe mechanical properties of STS304, MH1 and 443CT. Forming analysis using FEM is performed to investigate plastic strain during forming process. Prototype bellows has been made using STS304, MH1 and 443CT, respectively, and fatigue tests are carried out to evaluate fatigue life of bellows.

• 소성∙가공
• /
• 제20권3호
• /
• pp.193-205
• /
• 2011

Because of its rustproof property, stainless steel is widely used in kitchen appliances, building materials, electronics, chemical plants and automobile exhausts. In addition, the utilization of stainless steel for fuel cell application is growing. As the demand for this material increases, it is necessary to study the basic properties of stainless steel such as corrosion resistance, heat transfer, formability, cutting or shearing ability and weldability. In this article, the mechanical properties, formability and press forming performance of stainless steel are reviewed. Since temperature and strain rate affect the press forming performance of STS304(austenitic) stainless steel, the influence of these parameters on the plastic behavior should be investigated. Moreover, measures for the prevention of ridging of STS430(ferritic) and delayed fracture of STS430, which respectively appear during and after press forming, should be considered. Recently, stainless steel sheets with a thickness lower than 0.2 mm have been widely used in applications for mobile phone, digital camera and fuel cell separator. Therefore, there is a growing interest of studying the grain size effect and plasticity at the crystal scale in order to understand the anisotropic behavior and micro forming ability of thin sheets. This review paper was written with the objective of helping engineers and researchers to understand the forming characteristics of stainless steel and to establish standards in plastic forming techniques.

• 소성∙가공
• /
• 제18권3호
• /
• pp.223-228
• /
• 2009

Generally ferritic stainless steels are used for parts of exhaust system in commercial vehicle, because they have many advantages as low price and high corrosion resistant compared with austenitic stainless steels. Even though ferritic stainless steels have such various merits, austenitic stainless steels have been used to manufacture multi-layer bellows with complex geometry because of their high ductility. Recently, the mechanical properties of the ferritic stainless steels are getting improved and alternating austenitic stainless steel. In this paper, the possibility of mass production of multi-layer bellows made of ferritic stainless steel like MH1 and 443CT was studied. Tensile test, ridging test and corrosion test were carried out to observe material properties of STS304, MH1 and 443CT. Three types of prototype bellows were made using STS304, MH1 and 443CT stainless steels, and stiffness and fatigue tests were carried out to evaluate performance of the prototype bellows.

• Wind and Structures
• /
• 제15권2호
• /
• pp.87-109
• /
• 2012

A substantial part of South Africa is subject to more than one strong wind source. The effect of that on extreme winds is that higher quantiles are usually estimated with a mixed strong wind climate estimation method, compared to the traditional Gumbel approach based on a single population. The differences in the estimated quantiles between the two methods depend on the values of the Gumbel distribution parameters for the different strong wind mechanisms involved. Cluster analysis of the distribution parameters provides a characterization of the effect of the relative differences in their values, and therefore the dominance of the different strong wind mechanisms. For gusts, cold fronts tend to dominate over the coastal and high-lying areas, while other mechanisms, especially thunderstorms, are dominant over the lower-lying areas in the interior. For the hourly mean wind speeds cold fronts are dominant in the south-west, south and east of the country. On the West Coast the ridging of the Atlantic Ocean high-pressure system dominate in the south, while the presence of a deep trough or coastal low pressure system is the main strong wind mechanism in the north. In the central interior cold fronts tend to share their influence almost equally with other synoptic-scale mechanisms.