• Journal of Conservation Science
• /
• v.35 no.5
• /
• pp.430-439
• /
• 2019

This study investigates the characteristics of ridge-end tiles excavated from temple sites in Sabi Baekje. Analyses were carried out to evaluate the chemical and mineralogical compositions of the excavated samples. All the samples except one from the Gunsu-ri temple exhibit a similar element distribution pattern in rare earth element contents. However, major and trace element contents differ because the mixing method used in each sample depends on the type of ridge-end tile. The mineral components of the tiles were grouped into three types, irrespective of the excavated areas. Group 2 and 3 were probably developed in high-temperature fires in comparison with Group 1; this is verified by the Fe₂O₃ content of more than 5 wt% in these samples. In conclusion, the raw materials utilized in each ridge-end tile are prone to have changed according to the time of use of the tile, regardless of the excavated site.

• Wind and Structures
• /
• v.16 no.4
• /
• pp.301-322
• /
• 2013

Recent major post-hurricane damage assessments in the United States have reported that the most common damages result from the loss of building roof coverings and subsequent wind driven rain intrusion. In an effort to look further into this problem, this paper presents a full-scale (Wall of Wind --WoW--) investigation of external and underneath wind pressures on roof tiles installed on a low-rise building model with various gable roofs. The optimal dimensions for the low-rise building that was tested with the WOW are 2.74 m (9 ft) long, 2.13 m (7 ft) wide, and 2.13 m (7 ft) high. The building is tested with interchangeable gable roofs at three different slopes (2:12; 5:12 and 7:12). The field tiles of these gable roofs are considered with three different tile profiles namely high (HP), medium (MP), and low profiles (LP) in accordance with Florida practice. For the ridge, two different types namely rounded and three-sided tiles were considered. The effect of weather block on the "underneath" pressure that develops between the tiles and the roof deck was also examined. These tests revealed the following: high pressure coefficients for the ridge tile compared to the field tiles, including those located at the corners; considerably higher pressure on the gable end ridge tiles compared to ridge tiles at the middle of the ridge line; and marginally higher pressure on barrel type tiles compared to the three-sided ridge tiles. The weather blocking of clay tiles, while useful in preventing water intrusion, it doesn't have significant effect on the wind loads of the field tiles. The case with weather blocking produces positive mean underneath pressure on the field tiles on the windward side thus reducing the net pressures on the windward surface of the roof. On the leeward side, reductions in net pressure to a non-significant level were observed due to the opposite direction of the internal and external pressures. The effect of the weather blocking on the external pressure on the ridge tile was negligible.

• Conservation Science in Museum
• /
• v.20
• /
• pp.31-48
• /
• 2018

The Geumganasa Temple site two Ridege-end tiles at the Buyeo National Museum(The Buyeo2150-1 and 2150-2, hereinafter referred to as 2150-1 and 2150-2) were excavated the Geumgangsa Temple site. They provide important materials for investigating the shapes and production techniques of the ridge-end tiles of the time since their lower portions remain relatively intact. This study is intended to examine whether the two ridge-end tiles were identical. Conservation treatment, including removal of foreign substances, was conducted in preparation for observation with the naked eye to compare the formal features and production techniques of the two examples. The study revealed that these ridge-end tiles shared formal features such as surface color, clay composition, shape, size, and decoration; however, they differed in terms of production technique. The 2150-1 tile was made by assembling a separately-made body and wing and has no hole through the back, while the 2150-2 tile had its body and wing made as a single unit using long clay plates and features circular holes in the back. It was revealed that one portion of the body of both tiles was intentionally tilted during the production process.

• 보존과학연구
• /
• s.35
• /
• pp.57-71
• /
• 2014

As results of this study about the restoration and production techniques of the ridge-end roof tiles excavated from middle gate site in Bunhwangsa Temple, the ridge-end tile was considered that can be combined with four distinguished parts such as a body with upper and lower portions, a back, a belly, and a wing. And also some patterns can be verified. The body and the wing were piled up the coil clay and the back-side was bonded. The pileup process was assumed that three types of wood tools were applied to bond the facing surfaces. After the completion of the pileup process, the entire exterior was retouched by hand. For touching the inside, bare hands or some tools like a wooden branches were used to scratch and to re-face a clay plasterwork. And also, the stamped patterns which produced by framework were bonded to the body. The results from the XRD and the TG-DTA, Tridymite which shows the phase transition in more than $867^{\circ}C$ could not be identified, and also the endothermic reaction peak at $1063^{\circ}C$ showed the result that the alkali feldspar such as the albite was changed into a different mineral at $1050^{\circ}C$. Therefore, the ridge-end tiles can be considered that the firing temperature was below $867^{\circ}C$.

• Journal of Conservation Science
• /
• v.35 no.5
• /
• pp.518-527
• /
• 2019

This investion studies the manufacturing techniques of chimi(ridge-end roof tiles based on the) fragments excavated from the Wonju Beopcheonsa temple site(Historic site No. 466) and aids in the conservation of the fragments. The results of the investigation are categorized into the production of the body parts, the wing and the feather attachment, the production of the decorative parts, the scratches in the upper and lower part, the perforations connecting the upper and lower parts, and the formative features(bending phenomenon). The procedures in the conservation treatment of the chimi was performed in a sequential order beginning with a preliminary examination, followed by the removal of foreign substances, coating, joining and restoration, and color retouching. A three-dimensional scanning data was employed to restore the missing parts after adhesion to determine the location, size, and angle of the original shape. The restored chimi measures 118 cm in height and weighs 121 kg, which makes it the fifth largest in size among any chimi(including restored) in Korea. We expect that the pointed feathers will make the chimi from the Beopcheonsa temple site a rare reference as no specimens with these features have been found in Korea until now.

• Journal of Conservation Science
• /
• v.35 no.3
• /
• pp.217-225
• /
• 2019

The chimi(ridge-end tile) of Wangheungsa temple is the oldest in our country. The upper part of the chimi was excavated from the southern side of Wangheungsa temple and the lower part from the northern side. These parts are considered to be portions of the same chimi, because they are similar in shape and are excavated from two sides of the same temple structure. However, the original shape of the chimi cannot be determined owing to substantial deterioration. Hence, in this study, replicas of the deteriorated chimi portions of Wangheungsa temple were fabricated by employing 3D scanning technology and the computer numerical control machining method. While observing the bending phenomenon of the chimi, the proposed model was warped realistically on the basis of the bending direction of the actual chimi. Consequently, the restoration process was modified several times. The results indicated that no gaps can be found between the upper and lower parts, and the corresponding patterns connect naturally. Furthermore, the proposed method is contactless, safe, operable, reproducible, and appropriate for restoration of artifacts. Additionally, the modeling data is semi-permanent. Hence, if modelling data is appropriately applied as per the characteristics of artifacts, it can be utilized in various fields such as virtual exhibitions, hands-on exhibitions, cultural heritage restoration, and production of teaching aids and souvenirs.