• New & Renewable Energy
• /
• v.7 no.3
• /
• pp.83-91
• /
• 2011

The purpose of this study is to select appropriate location factors for wind power plant, provide detailed classification criteria, and find out appropriate sites for installing wind power plant in Gangwondo. In this study, the following 11 factors were extracted for site selection of wind power plant : wind resource, topography (valley angle, distance to the ridge), forest density, land use, preservation area, national park, Baekdu-Daegan, noise, shade, Transmission Line, and approaching roads. Each factor had relatively different level of importance so that AHP (Analytic Hierarchy Process) technique was used to calculated the weighted value per factor. For overlay analysis, classification criteria were prepared for each factor and each factor was classified into 3 grades : very appropriate, intermediate, poor. According to overlay analysis, the areas which received the highest grade (grade 5) was only in 0.16% of the total area of Gangwondo and had a tendency to exist along the mountain ridge over 600-meter elevation. Through analyzing the yearly average of wind power density, it was proved that the wind power density of areas with grade 4 or 5 had abundant wind resource over $400W/m^2$.

• Korean Journal of Environment and Ecology
• /
• v.24 no.5
• /
• pp.582-590
• /
• 2010

Baekdudaegan field survey has been proposed and presented as a various plan such as field survey analysis, management and restoration plan, etc. Whereas, the concerns of the Jeongmaek has increased continuously, nevertheless there is no research of present condition for Jeongmaek. This paper is to contribute to suggest for management and restoration as a basic study of vegetation structure in Yongso valley. We set up 30 plots($100m^2$) to verify the vegetation structure. As a result of classification analysis used by DCA, the type of 5 communities i.e. Pinus densiflora community, Betula schmidtii community, Populus maximowiczii community, Quercus mongolica community, Q. variabilis community were the most representative of Yongso valley vegetation communities. P. densiflora community was mainly distributed in the ridge of mountain, ridge of steep slope and stony area. In that reason, they avoid to compete with B. schmidtii community and Q. spp. community. In addition, the appearance of Rhododendron micranthum was mainly characteristics in the P. densiflora community. Species diversity indices(H') of groups were ranged from 0.7914~0.9942, the tree ages were 30~115 years. According to these results, the forests of Yongso valley not only form muti-layer vegetation structures but also have a great ecological value for protection and preservation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.3
• /
• pp.351-384
• /
• 1993

Complete denture occlusion must be developed to function efficiently and with the least amount of trauma to the supporting tissues. For the preservation of supporting tissues, it is imperative to reduce to a minimum the functional stress induced by dentures. The magnitude of the horizontal component of functional stress contributed by various occlusal teeth forms has not been studied. This study was aimed to investigate the influence of different occlusal teeth forms on the mode of distribution of the stresses in the mandibular tissue, and the displacement of lower dentures during the variant functional movement of mandible for this study three dimensional finite element analysis was used. FEM models were created using commercial software Super Sap for IBM 32 bit computer. The model was composed of 3380 brick elements and 4346 nodes. The results were as follows. 1. The magnitude of stress was similar between two models in centric occlusion, in the case of anatomic model, the stress was concentrated on the buccal side of alveolar ridge beneath the bicuspids. 2. During the protrusive movement, the increasing of stress from the posterior to anterior part of mandible was seen in the case of anatomic model. 3. During the lateral movement, the stress of anatomic model was greater than that of nonanatomic model. 4. The stress of anatomic model was concentrated on the anterior region of residual ridge during the lateral movement. 5. In the case of anatomic model the anterior part of denture was displaced severely at the centric and lateral position, but the denture of nonanatomic model was displaced minutely at the protrusive and lateral position.

• Journal of Periodontal and Implant Science
• /
• v.30 no.3
• /
• pp.527-538
• /
• 2000

Several extraction cases with advanced bone loss as a result of periodontal disease, root or labial bone fracture, extensive caries, and periapical lesions occur esthetic, functional problems and severe bone loss. Therefore, to treat these cases used several surgical methods and socket preservation among this therapies have been evaluated simple, effective and good prognosis in the implant placement. Socket preservation therapy have been used with barrier membranes or/and graft materials. Deproteinized bovine bone mineral have been evaluated ideal grafting materials. Recently, calcium-phosphate thin film coated bovine bone powders were developed in our country, but the study for these material wasn't reported. When two types of xenograft materials were implanted in extraction sockets of Beagle dogs, the effects of these were analyzed after 4 weeks and 8 weeks histological views. The results of this study were as follows. 1. In control groups, 4 weeks after implantation, the extraction sockets were filled with connective tissue which has dilated vessels and epithelial growth. And after 8 weeks, irregular connective bundles were observed. But new bone formation was not seen. 2. In Bio-Oss groups, epithelial growth was not seen and bone powder was covered with connective tissue fiber. New bone formation was found around the interproximal bone. There was no special change seen after 8 weeks, connective tissue fibers became more regular, and bone growth near bone powder was not made well. 3. In Ca-P BBP groups, epithelial cells didn't grow in the extraction sockets, there was a lot of new bone made around the bone powder after 8 weeks, new bone around bone powder was replaced with mature bone. It is thought that bone powder grafting into the extraction sockets is very useful for conservation of ridge, and Ca-P BBP is more effective in bone formation than Bio-Oss.

• Journal of Periodontal and Implant Science
• /
• v.45 no.4
• /
• pp.128-135
• /
• 2015

Purpose: The aim of this study was to determine the effect of overlaying titanium mesh (TM) with an adjunctive collagen membrane (CM) for preserving the buccal bone when used in association with immediate implant placement in dogs. Methods: Immediate implant placements were performed in the mesial sockets of the third premolars of five dogs. At one site the TM was attached to the fixture with the aid of its own stabilizers and then covered by a CM (CM group), while the contralateral site received only TM (TM group). Biopsy specimens were retrieved for histologic and histomorphometric analyses after 16 weeks. Results: All samples exhibited pronounced buccal bone resorption, and a high rate of TM exposure was noted (in three and four cases of the five samples in each of the TM and CM groups, respectively). A dense fibrous tissue with little vascularity or cellularity had infiltrated through the pores of the TM irrespective of the presence of a CM. The distances between the fixture platform and the first bone-implant contact and the bone crest did not differ significantly between the TM and CM groups. Conclusions: Our study suggests that the additional use of a CM over TM does not offer added benefit for mucosal healing and buccal bone preservation.

• The Journal of the Korean dental association
• /
• v.51 no.8
• /
• pp.459-467
• /
• 2013

The use of autogenous tooth bone graft material has been commercialized since 2008. Autogenous tooth bone grafts always require that the tooth of the patient be extracted, and thus, the use of graft material are limited in many cases. For solution of limitation in quantity and concurrent use of autogenous tooth bone graft material, the grafting of familial teeth has been suggested. It has the following advantages: the teeth of family members are used as bone graft materials, the genetic composition is identical, and potential genetic and infectious risks can be minimized. Because the teeth of family members are used, a good tissue affinity is obtained, and thus, superior bone generation rates compared to those observed for allogenic or xenogenic bones can be anticipated. We used familial tooth bone-graft materials for alveolar ridge augmentation, socket preservation, and maxillary sinus graft in some cases. In most cases, the impacted third molars of their children were prepared as bone graft material and were used for surgery. In one case, the impacted third molar from the patient's brother was used as bone graft material. We obtained satisfactory result and these cases are reported herein.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.4
• /
• pp.59-64
• /
• 1999

This study is about gaining orientation through anchorage act of a group of ferryman. In addition, a point acquisition and character of landmark that is closely realated to a point acquisition would be clarified by studying the form of configuration of the earth and object which is used landmark for anchorage. There are 13 anchorage points in the north part of Pusan harbor. 12 anchorage points are used to anchor. A ferryman let a ship which is temporarily anchoring move safely and speedily at the anchorage point. At that time, he uses landmarks by a technique of Overlay View. Between landmarks and viewer would be formed exquisite location combination. A mountain peak, a peak of island, nature configuration of land such as intermitent rock and location, size and form of buildings or structures of a city were variously appeared as landscape elements which were used landmarks. Looking at conditions to be easily captured as a target object, 1. A particular point of a mountain ridge line which was not shield by buildings. 2. In case objects have similar form, the building which was located in the front or the highest. 3. In case of a singular object, whatever there is physical elements, that would be a target object. Through this study a configuration of the ground such as a mountain peak which is become the background of harbor landscape is very important element to find anchorage point in configuration of the ground and object. So, the continuous preservation of the contour line of mountain is needed to do safe and effective anchorage act.

• Korean Journal of Heritage: History & Science
• /
• v.34
• /
• pp.196-209
• /
• 2001

Kunjung-mun Gate the only existing multi-level palace gate from the Chosun Dynasty, is the main fate of Kungjung-jun, the central building of Kyungbok-koong Palace. Sangryangmun(a written record of the construction of the ridge beam) of Kunjung-mun Gate was discovered in a hole under its main beam during the renovation project on September 19th, 2000. At the time of discovery, Sangryangmun was found in its original state as a rolled up scroll. On a clould-patterned, red silk cloth, 78 cm in width and 1200 cm in length, each of all 92 lines of the Kunjung-mun Sangryangmun is comprised of either 7 or 11 brush-written, ornamental "Seal" characters. With an exception of its discoloration, the material is considered well preserved. After its discovery, the National Institute of Cultural Properties stored the document in an airtight container for a permanent preservation. In accordance to the Royal Command at the time, the Kunjung-mun Sangryangmun was composed by Kim Byungi, then written by Lee Donsang on January 19th 1867. This document records the meaning and the process of the repair effort of Kunjung-mun Gate includes the wish for peace and longevity of the Chosun Kingdom and its people.

• Journal of Periodontal and Implant Science
• /
• v.50 no.6
• /
• pp.406-417
• /
• 2020

Purpose: This study investigated whether the placement of ribose cross-linked collagen (RCLC) membranes without primary soft tissue closure predictably resulted in sufficient alveolar ridge preservation in contained and non-contained extraction sockets. Methods: Membranes were positioned across extraction sockets, undermining full-thickness flaps, and the gingival margins were fixed by double-interrupted sutures without crossed horizontal mattress sutures for 1 week. In non-contained sockets, a bone substitute was used to support the membrane within the bony envelope. Radiographs and clinical images obtained 4 months later were analyzed by ImageJ software using non-parametric tests. Results: In 18 patients, 20 extraction sockets healed uneventfully and all sites received standard-diameter implants (4.1, 4.8, or 5.0 mm) without additional bone augmentation. Soft tissues and the muco-gingival border were well maintained. A retrospective analysis of X-rays and clinical photographs showed non-significant shrinkage in the vertical and horizontal dimensions (P=0.575 and P=0.444, respectively). The new bone contained vital bone cells embedded in mineralized tissues. Conclusions: Within the limitations of this pilot study, open healing of RCLC membranes may result in sufficient bone volume for implant placement without additional bone augmentation in contained and non-contained extraction sockets.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.38 no.1
• /
• pp.2-8
• /
• 2012

Introduction: Auto-tooth bone graft material consists of 55% inorganic hydroxyapatite (HA) and 45% organic substances. Inorganic HA possesses properties of bone in terms of the combining and dissociating of calcium and phosphate. The organic substances include bone morphogenetic protein and proteins which have osteoinduction capacity, as well as the type I collagen identical to that found in alveolar bone. Auto-tooth bone graft material is useful as it supports excellent bone regeneration capacity and minimizes the possibility of foreign body reaction,genetic diseases and disease transmission. Materials and Methods: Implant placement combined with osteoinductive regeneration,preservation of extraction socket, maxillary sinus augmentation, and ridge augmentation using block type,powder type, and block+powder type autobone graft materialwere performed for 250 patients with alveolar bone defect and who visited the Department of Oral and Maxillofacial Surgery, College of Dentistry, Dankook University from September 2009 to August 2011. Results: Clinical assessment: Among the 250 patients of auto-tooth bone graft, clinical assessment was performed for 133 cases of implant placement. The average initial stabilization of placed implants was 74 implant stability quotient (ISQ). Radiological assessment: The average loss of crestal bone in the mandible as measured 6 months on the average after the application of prosthesis load was 0.29 mm, ranging from 0 mm to 3.0 mm. Histological assessment: In the histological assessment, formation of new bone, densified lamellated bone, trabecular bones, osteoblast, and planting fixtures were investigated. Conclusion: Based on these results, we concluded that auto-tooth bone graft material should be researched further as a good bone graft material with osteoconduction and osteoinduction capacities to replace autogenous bone, which has many limitations.