• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제41권
• /
• pp.4.1-4.10
• /
• 2019

Background: The mandibular third molar (M3) is typically the last permanent tooth to erupt because of insufficient space and thick soft tissues covering its surface. Problems such as alveolar bone loss, development of a periodontal pocket, exposure of cementum, gingival recession, and dental caries can be found in the adjacent second molars (M2) following M3 extraction. The specific aims of the study were to assess the amount and rate of bone regeneration on the distal surface of M2 and to evaluate the aspects of bone regeneration in terms of varying degree of impaction. Methods: Four series of panoramic radiographic images were obtained from the selected cases, including images from the first visit, immediately after extraction, 6 weeks, and 6 months after extraction. ImageJ software^® (NIH, USA) was used to measure linear distance from the region of interest to the distal root of the adjacent M2. Radiographic infrabony defect (RID) values were calculated from the measured radiographic bone height and cementoenamel junction with distortion compensation. Repeated measures of analysis of variance and one-way analysis of variance were conducted to analyze the statistical significant difference between RID and time, and a Spearman correlation test was conducted to assess the relationship between Pederson's difficulty index (DI) and RID. Results: A large RID (> 6 mm) can be reduced gradually and consistently over time. More than half of the samples recovered nearly to their normal healthy condition (RID ≤ 3 mm) by the 6-month follow-up. DI affected the first 6 weeks of post-extraction period and only showed a significant positive correlation with respect to the difference between baseline and final RID. Conclusions: Additional treatments on M2 for a minimum of 6 months after an M3 extraction could be recommended. Although DI may affect bone regeneration during the early healing period, further study is required to elucidate any possible factors associated with the healing process. The DI does not cause any long-term adverse effects on bone regeneration after surgical extraction.

• 한국식품영양과학회지
• /
• 제43권7호
• /
• pp.1062-1067
• /
• 2014

콩 함유 수용성 탄수화물의 동시분석 시 증기화광산란검출법(HPLC/ELSD) 및 굴절율검출법(HPLC/RID)의 분석 효율성, 정밀성 및 재현성을 상호 비교, 평가하여 콩 함유 수용성 탄수화물의 효율적 분석방법을 제공하고자 하였다. HPLC/ELSD 분석법 적용 시 콩 함유 수용성 탄수화물의 정량한계(LOQ)를 확인한 결과 5.6~7.6 mg/kg 범위를 나타낸 반면, RID는 16.2~33.9 mg/kg 범위를 나타내어 HPLC/ELSD 분석법이 RID 분석법 대비 감도가 향상된 양상을 확인하였고, intra-day(n=10) 및 inter-day(n=5) 분석재현성 평가에서도 피크의 머무름 시간(Rt.) 및 면적(peak area) 모두 최대 2.5% 미만의 변이계수를 나타내어 높은 분석 재현성을 확인할 수 있었다. 또한 농도별 표준시약을 이용하여 검량식의 직선성을 확인한 결과 모든 성분이 고도의 직선성($R^2$ >0.999)이 유지되어 정량적 분석이 가능함을 확인하였다. 콩 함유 수용성 탄수화물의 함량을 HPLC/ELSD 및 RID 방법으로 상호 비교한 결과 HPLC/ELSD 분석법을 적용하였을 경우 RID 분석법 대비 각 수용성 탄수화물의 함량이 더 높게 평가됨을 확인할 수 있었다.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2016년도 춘계 종합학술대회 논문집
• /
• pp.241-242
• /
• 2016

Recent abnormal climate change induces localized heavy rainfall and extreme disasters such as debris flow near urban area. Thus many researches have been conducted to estimate and prevent, especially in focus of physical behavior of debris flow. Even though it is hardly to consider overall related parameters to estimate the extent and degree of directly or indirectly damages due to debris flow. Those analytic restraint would be caused by the diversity and complexity of regional topographic and hydrodynamic characteristics of debris flow inside. We have utilized the Bayesian method to compensate the uncertainty due to the complex characteristics of it after analyzing the numerical results from FLO-2D and field measurement data. Revised values by field measurements will enhance the numerical results and the missing parameters during numerical simulation will be supplemented with this methodology. As a final outcome in this study, the risk index of debris flow damage will be suggested to provide quantitative estimation in terms of hazard protection including the impact on buildings, especially in inner and outer of urban area.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2010년도 춘계 종합학술대회 논문집
• /
• pp.536-538
• /
• 2010

과학기술분야 학술지에 대한 인용색인 DB구축과 서비스는 중요하다. 대표적인 인용색인 DB로는 SCI가 있으며 전 세계적으로 활용되고 있다. 국내 학술지 대부분이 SCI 대상 학술지가 아니므로 한국 내 과학기술분야 학술지에 대한 계량분석 및 성과평가가 불가능한 현실이다. 이러한 문제점을 해결하기 위한 대안이 한국과학기술인용색인서비스(KSCI)이다. 본 논문에서는 기존의 KSCI 서비스를 전면 개편한 KSCI 신규버전 서비스에 대하여 이용자 만족도 조사를 실시하여 수집된 결과를 분석하고 현재 시스템의 수준과 향후 개선방향을 도출하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2566-2569
• /
• 2003

An alternative optimal control law formulation is introduced and compared with two different control law, a conventional linear quadratic regulator and the control law based on game theory. This formulation eliminates the undesired modes of the system by the projection of a controller onto the subspace orthogonal to that of the bad modes. In conventional LQR control law, the control performance can be improved only by using proper weighting matrices in performance index, normally, with high cost. The control law formulation by game theory may provide various ways to obtain the desired performance. The control law modified by the elimination of bad modes provides efficient ways to get rid of an undesired performance since it eliminates the exact modes which cause the bad control performance.

• 한국소음진동공학회논문집
• /
• 제12권3호
• /
• pp.204-212
• /
• 2002

The ride comfort is one of the important dynamic performances of railway vehicle and is affected by the various factors, such as vibration, sound, temperature, humidity, etc. In general, vibration is known to be a major effect of rode comfort. There are many studies on the evaluation methods of ride comfort in the railway vehicle vibration. Each of the evaluation methods suggested by Spelling and in the standards recommends a different evaluation method and guidance. So users must review whether they can apply it to their railway system or not. In this study, we have suggested the relationship between several evaluation methods using the statistical vibration model based on the experimental data.

• 자원ㆍ환경경제연구
• /
• 제17권1호
• /
• pp.121-146
• /
• 2008

본 연구의 목적은 OECD 국가의 환경제약을 포함한 기술효율과 생산성 상실을 추정하여 환경효율지수를 실증분석하고 국가별 지속가능 발전 정도를 비교해 보고자 함이다. 1985년부터 1999년까지의 기간 동안 OECD 20개국의 패널자료를 사용하여 쌍곡선효율척도(hyperbolic measure of productive efficiency)에 기초한 기술효율을 측정하였다. 나아가 각 국가의 환경제약으로 인한 생산성 상실률과 산출에 대한 상실정도를 계측하였다. 1985년부터 1999년 동안 OECD 각 국가들의 환경효율지수는 점차 하락하고 있는 추세를 보여준다. 일본, 독일, 프랑스 등의 국가에서 오염물 처리에 상당한 부담을 가지고 있는 것으로 나타났다. 한국은 전반적으로 환경경제효율성이 높지만 1990년대 후반에 환경효율성이 악화되었고 OECD 국가들과 비슷하게 질소산화물 처리에 대한 부담이 높았다.

• 대한원격탐사학회지
• /
• 제38권6_1호
• /
• pp.1273-1283
• /
• 2022

최근 기후변화로 인해 중대형 산불이 빈번하게 발생하여 매년 인명 및 재산피해로 이어지고 있다. 원격탐사를 활용한 산불 피해지 모니터링 기법은 신속한 정보와 대규모 피해지의 객관적인 결과를 취득할 수 있다. 본 연구에서는 산불 피해지를 분류하기 위해 Sentinel-2의 분광대역, 정규식생지수(normalized difference vegetation index, NDVI), 정규수역지수(normalized difference water index, NDWI)를 활용하여 2022년 3월 발생한 강릉·동해 산불 피해지를 대상으로 U-net 기반 convolutional neural networks (CNNs) 딥러닝 모형을 모의하였다. 산불 피해지 분류 결과 강릉·동해 산불 피해지의 경우 97.3% (f₁=0.486, IoU=0.946)로 분류 정확도가 높았으나, 과적합(overfitting)의 가능성을 배제하기 어려워 울진·삼척 지역으로 동일한 모형을 적용하였다. 그 결과, 국립산림과학원에서 보고한 산불 피해 면적과의 중첩도가 74.4%로 확인되어 모형의 불확도를 고려하더라도 높은 수준의 정확도를 확인하였다. 본 연구는 농림위성과 유사한 분광대역을 선택적으로 사용하였으며, Sentinel-2 영상을 활용한 산불 피해지 분류가 정량적으로 가능함을 시사한다.

• 한국정밀공학회지
• /
• 제23권5호
• /
• pp.155-161
• /
• 2006

This paper introduces a new type of mechanical tape feeder for chip mounter. The mechanical feeder is composed of a pneumatic linear actuator and a linear feeding module with the application of a cam-slider. As semiconductor chips are getting smaller, PCB assembly makers require the feeder to position the chip with high accuracy. The linear feeding system improves the positioning accuracy of the chip by getting rid of the index error, which brings into existence on the sprocket rotating feeder. It also can make greatly reduce the dumping rate. The dumping error is caused by the impact occurred as the pawl to interrupt ratchet wheel rotation. The paper discusses its mechanism and mechanical performance. The positioning accuracy and the dynamic characteristic were measured for long time operation and analyzed. As a result, the feeder showed very good performance. However, the feeding system was dynamically unstable due to the cover film eliminator that is required to be modified

• Bulletin of the Korean Chemical Society
• /
• 제26권10호
• /
• pp.1533-1538
• /
• 2005

We have determined the contents of monosaccharides in the hydrolysates of some yogurt and orange juice products by derivatizing monosaccharides with p-aminobenzoic acid ethyl ester (ABEE). The separation of the ABEE-derivatized monosaccharides was efficiently carried out by HPLC using a microcolumn packed with the Alltima $C_{18}$ stationary phase. The concentrations of monosaccharides were determined based on the measured peak area/height counts. ABEE derivatization of fructose and its detection have never been successfully carried out before this work. In this study, two peaks were observed in a fixed ratio for ABEE-fructose, and the ratio was maintained over a wide range of fructose concentration. In order to prove the validity of the above method, we compared the concentrations of glucose, galactose and fructose determined by ABEE derivatization and UVD (ultraviolet detector) chromatography with those determined by RID (refractive index detector) chromatography without derivatization. The determined concentrations of monosaccharides obtained from the two chromatographic methods were found close to each other within acceptable error ranges.