• Journal of Magnetics
• /
• v.13 no.4
• /
• pp.120-123
• /
• 2008

Magnetization ringing following domain wall collision on a ferromagnetic nanowire has been investigated by micromagnetic simulation. Suppressed magnetization ringing is observed with the introduction of a small ribbon to the nanowire. Magnetization ringing has been analyzed in a frequency space by a fast Fourier transform. With the introduction of a small ribbon and/or taping of the wire, the amplitude of ringing is reduced with a shifted frequency peak.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.327-330
• /
• 1998

A 2watts MMIC(Monolithic Microwave Integrated Circuits) SSPA(Solid State Power Amplifiers) for 20GHz band communication systems has been designed, manufactured and measured. The 0.15um pHEMT technologywith the gate size of 400um for single device was used for the fabrication of MMIC Power Amplifier chips. The precision MIC patterns for the peripherals like power combiner/divider and microstrip lines were realized using hard substrate for gold wire/ribbon bonding. The measured data shows that this MMIC SSPA has the linear gain of 18dB, output power of 33.42dBm(2.2Watts)at 20~21GHz.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.5
• /
• pp.401-406
• /
• 2008

Recently, portable magnetic sensors with high sensitivity are strongly required for various applications such as biosensor, nondestructive testing and directional sensor. A novel magnetic sensor system was developed by utilizing giant magnetoimpedance(MI) effect of soft magnetic ribbons. The sensor system consists of sensing head of $Co_{66}Fe_{4}Si_{15}B_{15}$ ribbon having asymmetric MI characteristics through exchange coupling produced by field-annealing in open air and circuit for signal processing. The sensor system showed almost linear characteristics in dynamic range of $-1\;Oe\;{\sim}\;1\;Oe$ and sensitivity of 10.5 V/Oe. The sensor was applicable to nondestructive testing system to detect defects in wire ropes.

• Current Photovoltaic Research
• /
• v.7 no.3
• /
• pp.65-70
• /
• 2019

As a demand of higher power photovoltaic modules, shingled, multi-busbar, half-cell, and bifacial techniques are developed. Multi-busbar module has advantage for large amount of light havesting. And, half-cell is high power module for reducing resistive losses and higher shade tolerance. Recently, researches on multi-busbar is focused on reliability according to adhesion and intermetallic compound between Sn-Pb solder and Ag electrode. And half-cell module is researched to comparing with full-sized cell module for structure difference. In this study, we investigated the factors affecting to efficiency and adhesion of multi-wires half-cell module according to wire thickness, solder thickness, and flux. The results of solar simulator and peel test was that peel strength and efficiency of soldered cell is not related. But samples with flux including high solid material showed high efficiency. The results of FE-SEM and EDX line scan on cross-section between wire and Ag electrode for different flux showed thickness of solder joint between wire and Ag electrode is increasing through solid material increasing. Flux including high solid material would affect to solder behavior on Ag electrode. Higher solid material occurred lower growth of IMC layer because solder permeate to sider of wire ribbon than Ag electrode. And it increased fill factor for high efficiency. In soldering process, amount of solid material in flux and solder thickness are the factor related with characteristic of soldered photovoltaic cell.

• The korean journal of orthodontics
• /
• v.27 no.5 s.64
• /
• pp.825-837
• /
• 1997

The purpose of this study was to evaluate the effect of splinting methods on the rearrangement of periodontal fibers after experimental tooth movement. Orthodontic force was applied by placing closed coil spring between upper third incisor and canine in seven dogs, weighing 20 kg or more. After 3 weeks of force application, 0.0215 inch multistrand wire and polyethylene ribbon were bonded to each side, as a flexible and rigid splinting respectively in 6 experimental animals. The remaining one served as a control. Each two animals were sacrificed at 4, 8 and 12 weeks after splinting respectively and prepared histologically for hematoxylin-eosin and Masson's trichrome staining. The results of this study were obtained as follows: 1. After tooth movement, periodontal space was narrowed and periodontal titers were thick on pressure side while elongated fibers were observed on tension side. 2. After 4 weeks of retention, the rearrangement of periodontal fibers was observed in the flexible splinting group, but not in the rigid splinting group. 3. After 8 weeks of retention, the rearrangement of periodontal titers was observed in both groups, but the difference could not be detected between two groups. 4. During the retention period, the rearrangement of periodontal fibers was faster in tension side than in pressure side. These results show that the rearrangement of periodontal fibers is also obtained by rigid splinting after tooth movement. It is suggested that the rigid splinting by polyethylene ribbon can be used as a way of postorthodontic retention.

• The International Journal of Costume Culture
• /
• v.7 no.2
• /
• pp.151-157
• /
• 2004

This research is to conservate the old hat and restore its shape and place it on a supportive form in a stable protective container. The hat is a homemade construction, utilizing three different machine made laces, and two cotton net fabrics. The exterior, particularly the top crown piece, as well as the lace along the brim's edge has been generally soiled and discolored. Inside the crown, the cotton net has broken threads, and thread loss in several areas. The paper covering the two wires is very weak, and has discolored the lace in the areas of contact. The plastic buckles of the velvet ribbon have also discolored the areas where there is contact. The wash/bleach bath procedure was very effective. Virtually all of the light brown surface discoloration stains were removed. The darker brown spots, particularly concentrated around the two paper covered wires and assumed to be rust, were $90\%$ removed by the treatment. The brown spots apparently were due to the degradation of the paper covering, and not caused by the wire itself. The buckram foundation lost about $50\%$ of its stiffness, but this was not a major concern due to the fact that this hat should remain it its mount, which has been designed to serve for both storage and exhibition purposes.

• Journal of Sensor Science and Technology
• /
• v.16 no.5
• /
• pp.389-393
• /
• 2007

Soft ferromagnetic materials are very useful for many sensors using magnetic materials demanding high permeability, low coercivity and low hysteresis loss. Among them, FeCoSiBNi amorphous magnetic films show a good impedance change (about 5.01 %/Oe, at 10 MHz) by the exterinal magnetic field in this experiment. The magnetic films are produced by melt-spun method, one of the rapid solidification process. Ribbon shape wires were made from the films, and let them annealed in DC magnetic field to increase the maximum Giant Magneto Impedance ratio. Field annealing decreases the stress and changes the effective anisotropy. Thus, we can find that the impedance change (200.47 %) is improved and the fabricated magnetic wire has characteristics of good sensor element.

• Journal of the Korean Society for Heat Treatment
• /
• v.2 no.2
• /
• pp.38-45
• /
• 1989

The Cu-Fe permanent magnet were prepared in situ process, which has economic and mass productive merits in producing multi filamentary composites. The purpose of this research was to study the effect of reduction ratio and heat treatment on magnetic property. As the reduction ratio of Cu-Fe wire increased, the filament structure became finer and interfilament distances decreased and the morphology of filament cross section became ribbon shape. As Fe content increased significantly. The coercivity and squareness of Cu-55 wt%Fe composite increased as a reduction ratio became higher, whereas they increased to maximum values at 0.09 mm ${\phi}$ for Cu-30 wt%Fe, and 0.066 mm ${\phi}$ for CU-45 wt%Fe respectively, and decreased for further reduction. The magnetic properties of Cu-Fe composites can be more enhanced by intermediate heat treatment. The best magnetic properties were obtained from Cu-55 wt%Fe composite deformed to 0.054 mm ${\phi}$ and annealed.

• Journal of IKEEE
• /
• v.7 no.2 s.13
• /
• pp.230-235
• /
• 2003

A small and integrated MMIC VCO(Voltage Controlled Oscillator) at Ka-band has been developed. This oscillator was designed as Clapp-Gouriet type scheme, fabricated, and implemented on the carrier. This was connected to an alumna substrate on the carrier providing output port for module, utilizing ribbon and wire bonding technique allowing the loss of 0.2dB. This VCO module showed the excellent performance.