• 제목/요약/키워드: Rib thickness

검색결과 217건 처리시간 0.024초

구조 상세부의 피로거동을 고려한 고성능 강바닥판 개발에 관한 해석적 연구 (Analytical Study on the Development of High-Performance Orthotropic Steel Deck considered the Fatigue Behaviors of Structural Details)

  • 경갑수;신동호;김교훈
    • 한국강구조학회 논문집
    • /
    • 제18권4호
    • /
    • pp.417-426
    • /
    • 2006
  • 최근에 강바닥판 교량에서 여러 가지 피로손상이 보고되고 있는데, 이들 대부분의 피로 손상은 윤하중의 직접 재하에 의한 강바닥판의 복잡한 구조거동에 기인한다. 따라서 본 연구에서는 강바닥판교의 세로 리브와 가로리브 용접이음부와 데크 플레이트와 세로리브 용접이음부의 피로손상원인을 구조해석에 의해 분석한 후, 피로를 고려한 구조상세를 제안하기 위해 데크 플레이트 두께, 가로리브 스켈럽 상세, 가로리브 이음길이를 변수로 하는 구조해석을 수행하였다. 이들 연구결과로부터 이들 구조상세에 대한 피로거동특성을 파악하고, 피로강도가 향상된 구조상세를 제안하였다.

탄소섬유 복합재를 이용한 위성용 다기능 구조체의 방열성능 분석 (Study on the Thermal Radiation Performance of the Multi-functional Structure Made of the Carbon Fiber Composite Material)

  • 김택영;현범석;서영배;장태성;서현석;이장준;김원석;이주훈
    • 한국항공우주학회지
    • /
    • 제40권2호
    • /
    • pp.157-164
    • /
    • 2012
  • 다기능 구조체는 전자장비, 열제어 부품, 우주복사 차폐물 및 지지구조물이 하나의 시스템으로 통합된 구조적 결합체로써, 위성 및 행성탐사선 모듈의 소형화/경량화를 달성하여 경제성을 획기적으로 향상시킬 수 있는 매우 중요한 첨단 모듈이다. 본 연구에서는 구조적인 강도를 고려하여 설계된 다기능 구조체의 6가지 형상에 대하여 방열성능을 수치해석적인 방법으로 검토하였다. 다기능 구조체의 rib 형상이 방열판 내 전열효과에 미치는 영향은 열전도 측면만을 고려하는 것은 의미가 없으며, 구조적인 강성, 제작의 난점, 무게 등을 모두 고려하여야 하고, 전열 측면에서는 rib의 형상보다 면재 외부층의 두께와 무게에 대한 trade-off를 통하여 최적화하는 것이 일반적으로 유효하다고 판단된다.

중공 데크플레이트에 사용된 철선의 내부피복두께에 따른 부착응력-변형률 예측모델 (Bond Stress-Strain Predict Model with Inner Cover Thickness of Steel Wire Used in Void Deck Plate)

  • 김희현;최창식
    • 대한건축학회논문집:구조계
    • /
    • 제34권1호
    • /
    • pp.41-51
    • /
    • 2018
  • In case of evaluating the bond stress of a void deck plate using a wire steel, there is no standard formula considering both the influence on the void and the type of the reinforcing bar. Therefore we proposed a model equation considered the bond characteristics of the void deck plate. A total of 46 specimens was carried out a direct pull-out test and the test variables were the presence of a void body, type of reinforcing bar, the inner cover thickness according to the location of reinforcing bars and bond region. As a result of the comparison between the steel bar and steel wire, the bond stress of the steel wire with the relative rib area of 0.071 is 4.5 ~ 28.58% lower than that of the steel bar with 0.092 and the bond stress reduction rate increases when the inner cover thickness is insufficient. In the case of the inner cover thickness of $1.7d_b$ and $2.7d_b$, the bond stress was reduced to 48.7 ~ 68.4%. In the inner cover thickness was $4.9d_b$ and $5.2d_b$, the bond stresses were equivalent to those of the solid specimens. It was confirmed that the average bond stress and strain were affected by the inner cover thickness. Therefore the predicted model for one module of the void deck plate is proposed and verified by considering the bond characteristics of the void deck plate.

WorldSID를 이용한 기둥측면 충돌 슬레드 시험 개발 방법 연구 (A study on development of the pole side impact sled test using WorldSID)

  • 오형준;김승기;임경호
    • 자동차안전학회지
    • /
    • 제5권2호
    • /
    • pp.5-10
    • /
    • 2013
  • The pole side crash caused fatal injury by comparison with other crash impact mode such as frontal and rear crash. EuroNCAP proposed the pole side crash test using WorldSID(World Side Impact Dummy). The objective of this study is to develop the pole side impact sled test using dummy rib deflection between crash and sled test. In the pursuit of this purpose, we fabricated new pole side sled buck and test preliminary pole sled using ES-2re. Through this, we found the sled acceleration pulse scale. Hardness and thickness of the EPP affects the rib deflection. We conducted the pole sled test using WorldSID based on the preliminary results. As a result, rib deflection was shown to correlate well between crash test and pole side sled test.

플라즈마 디스플레이 패널을 위한 레이저 직접 패터닝 (Laser-Direct Patterning for Plasma Display Panel)

  • 안민영;이경철;이홍규;이천
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 1999년도 춘계학술대회 논문집
    • /
    • pp.99-102
    • /
    • 1999
  • A mixture which was made from organic gel, glass powder and ceramic powder was masklessly etched for fabrication of barrier rib of PDP(Plasma Display Panel) by focused Ar$^{+}$ laser( λ =514 nm) and Nd:YAG(λ =532, 266 nm) laser irradiation at the atmosphere. The depth of the etched grooves increases with increasing a laser fluence and decreasing a scan speed. Using second harmonic of Nd:YAG laser, the threshold laser fluence was 6.5 mJ/$\textrm{cm}^2$ for the sample of PDP barrier rib softened at 12$0^{\circ}C$. The thickness of 130 ${\mu}{\textrm}{m}$ of the sample on the glass was clearly removed without any damage on the glass substrate by fluence of 19.5 J/$\textrm{cm}^2$....

  • PDF

Aeroelastic tailoring using crenellated skins-modelling and experiment

  • Francois, Guillaume;Cooper, Jonathan E.;Weaver, Paul M.
    • Advances in aircraft and spacecraft science
    • /
    • 제4권2호
    • /
    • pp.93-124
    • /
    • 2017
  • Aeroelastic performance controls wing shape in flight and its behaviour under manoeuvre and gust loads. Controlling the wing‟s aeroelastic performance can therefore offer weight and fuel savings. In this paper, the rib orientation and the crenellated skin concept are used to control wing deformation under aerodynamic load. The impact of varying the rib/crenellation orientation, the crenellation width and thickness on the tip twist, tip displacement, natural frequencies, flutter speed and gust response are investigated. Various wind-off and wind-on loads are considered through Finite Element modelling and experiments, using wings manufactured through polyamide laser sintering. It is shown that it is possible to influence the aeroelastic behaviour using the rib and crenellation orientation, e.g., flutter speed increased by up to 14.2% and gust loads alleviated by up to 6.4%. A reasonable comparison between numerical and experimental results was found.

Genetic and phenotypic relationships of live body measurement traits and carcass traits in crossbred pigs of Korea

  • Do, Chang-Hee;Park, Chan-Hyuk;Wasana, Nidarshani;Choi, Jae-Gwan;Park, Su-Bong;Kim, Si-Dong;Cho, Gyu-Ho;Lee, Dong-Hee
    • 농업과학연구
    • /
    • 제41권3호
    • /
    • pp.229-236
    • /
    • 2014
  • This study presents the estimates of heritabilities of body measurement traits and carcass traits, and genetic and phenotypic correlations of those traits for crossbred pigs in Korea. Body and ultrasound (A mode: Piglog 105) measurements in 221 pigs including body weight, length, height and width, three back fat thickness at the points of 4th, 14th rib and chine bone, eye muscle area and lean meat percent were collected at the ages of 70, 145 and 180 days and then slaughtered to measure carcass weight, back fat, belly, collar butt, spare rib, picnic shoulder, hind leg, loin, tenderloin, lean meat yield and intramuscular rough fat content in loin. Genetic analysis was done using a multi-trait animal model. Heritabilties of the body measurements were ranged from 0.331 to 0.559 and three measurements of back fat thickness were also high as range varying from 0.402 to 0.475 for the ages of 145 and 180 days. However, eye muscle area was moderate (0.296) at the age of 180 days. Heritabilities of retail cut yields were also high as ranged from 0.387 to 0.474 and of IMF content in loin was 0.499. Heritabilities of the cut percent traits were ranged from 0.249 to 0.488. Important positive genetic and phenotypic correlations were noted for all carcass yield traits (0.298 to 0.875 and 0.432 to 0.922, respectively). IMF showed low negative genetic correlations with carcass yield traits, such as carcass weight, picnic shoulder, hind leg, loin, tenderloin and lean meat yield whereas low positive genetic correlations with back fat, belly, collar butt and spare rib. Loin, tenderloin and lean meat percent showed negative genetic correlations with carcass weight, back fat thickness, collar butt, spare rib and picnic shoulder percent. The four body measurements at the ages of 70, 145 and 180 days had positive genetic correlations with belly, shoulder butt, spare rib, picnic shoulder and hind leg percent, but negative genetic correlations were shown with loin and tenderloin percent except body measurements at 70 days. The results suggest that carcass yield are negatively correlated with intramuscular fat content, which is a major factor deciding pork quality and the yield of loin and tenderloin are not increased as much as increase in body size. However, the proportions of belly and collar butt are increased with the body size. In conclusion, selection strategy should be designed according to the preference on composition of carcass in each country.

Numerical investigation on seismic performance of reinforced rib-double steel plate concrete combination shear wall

  • Longyun Zhou;Xiaohu Li;Xiaojun Li
    • Nuclear Engineering and Technology
    • /
    • 제56권1호
    • /
    • pp.78-91
    • /
    • 2024
  • Double steel plate concrete composite shear wall (SCSW) has been widely utilized in nuclear power plants and high-rise structures, and its shear connectors have a substantial impact on the seismic performance of SCSW. Therefore, in this study, the mechanical properties of SCSW with angle stiffening ribs as shear connections were parametrically examined for the reactor containment structure of nuclear power plants. The axial compression ratio of the SCSW, the spacing of the angle stiffening rib arrangement and the thickness of the angle stiffening rib steel plate were selected as the study parameters. Four finite element models were constructed by using the finite element program named ABAQUS to verify the experimental results of our team, and 13 finite element models were established to investigate the selected three parameters. Thus, the shear capacity, deformation capacity, ductility and energy dissipation capacity of SCSW were determined. The research results show that: compared with studs, using stiffened ribs as shear connectors can significantly enhance the mechanical properties of SCSW; When the axial compression ratio is 0.3-0.4, the seismic performance of SCSW can be maximized; with the lowering of stiffener gap, the shear bearing capacity is greatly enhanced, and when the gap is lowered to a specific distance, the shear bearing capacity has no major affect; in addition, increasing the thickness of stiffeners can significantly increase the shear capacity, ductility and energy dissipation capacity of SCSW. With the rise in the thickness of angle stiffening ribs, the improvement rate of each mechanical property index slows down. Finally, the shear bearing capacity calculation formula of SCSW with angle stiffening ribs as shear connectors is derived. The average error between the theoretical calculation formula and the finite element calculation results is 8% demonstrating that the theoretical formula is reliable. This study can provide reference for the design of SCSW.

세로리브 내부 보강상세에 따른 강바닥판 연결부의 피로거동 특성에 관한 해석적 연구 (Analytical Study on the Characteristic of Fatigue Behavior in Connection Parts of Orthotropic Steel Decks with Retrofitted Structural Details in Longitudinal Rib)

  • 선창원;박경진;경갑수;김교훈
    • 한국강구조학회 논문집
    • /
    • 제20권1호
    • /
    • pp.105-119
    • /
    • 2008
  • 윤하중을 직접 받는 강바닥판교는 공용연수 증가에 따라 세로리브와 가로리브 교차부 주위 등의 구조상세 등에서 피로 균열발생 사례가 증가하고 있는데, 이러한 피로균열 억제방안으로는 바닥강판의 두께를 증가시키거나 세로리브 내부에 보강상세 적용 등이 효율적인 것으로 보고되고 있다. 본 연구에서는 기존 연구에서 피로균열 발생이 빈번히 보고되고 있는 가로리브와 세로리브 연결부, 세로리브 및 가로리브 슬릿부를 대상으로 세로리브의 무보강상세 및 보강상세에 대한 구조해석을 수행하여 피로강도 향상을 위한 구조상세를 제안하고자 한다. 해석에서는 세로리브내의 벌크헤드 및 수직리브를 대상으로 형상 및 크기 변화, 부착위치를 변수로 하여 상세 구조해석을 수행하였다. 해석 결 과 보강상세가 있는 경우가 대상 구조상세부에서의 응력감소가 더 크며, 벌크헤드 상세보다는 수직리브 보강상세에서 피로강도 향상이 더 효율적인 것으로 나타났다.

The Effect of Phosphor Thickness and Discharge Space on the Luminance and Addressing Time in ac PDP

  • Lee, Gi-Bum;Heo, Jeong-Eun;Kim, Gyu-Seup;Kim, Young-Kee;Lee, Sung-Hyun;Cho, Jung-Soo;Park, Chung-Hoo
    • Journal of KIEE
    • /
    • 제11권1호
    • /
    • pp.27-32
    • /
    • 2001
  • In this study, the luminance, luminous efficiency and address time of an PDP as a parameter of the phosphor thickness and the size of discharge space are investigated. The maximum luminance and luminous efficiency are obtained at the phosphor thickness of 30 ${\mu}{\textrm}{m}$ for the rib height of 110 ${\mu}{\textrm}{m}$. For the rib height of 120~160 ${\mu}{\textrm}{m}$, the maximum values are obtained at the thickness of 50 ${\mu}{\textrm}{m}$ regardless of the kind of R, G and B phosphor. These results do not affected by the variation of discharge space. The average decrease rate of the total charge to the phosphor thickness is about 3.35pc/cell/10 ${\mu}{\textrm}{m}$ and the average increase rate of the addressing time is about 0.027 $mutextrm{s}$/10 ${\mu}{\textrm}{m}$.

  • PDF