• Title/Summary/Keyword: Rhodamine

Search Result 364, Processing Time 0.026 seconds

Titanium Dioxide 유동층 반응기를 이용한 염료 분해

  • 김지혜;이태경;나영수;김도한;송승구
    • Proceedings of the Korean Environmental Sciences Society Conference
    • /
    • 2000.05a
    • /
    • pp.63-64
    • /
    • 2000
  • 공기중이나 UV 등의 광원에 비교적 안정적인 염료 Rhodamine B는 UV 조사아래 광촉매인 $TiO_2$의 첨가로 그 분해가 가능하였다. 유동층 반응기에 적합하도록 자체 제조된 광촉매 입자, Photomedia도 우수한 효율로 염료의 분해가 가능함을 보여주었다.

  • PDF

Cadmium Sulphide Nanorods: Synthesis, Characterization and their Photocatalytic Activity

  • Giribabu, Krishnamoorthy;Suresh, Ranganathan;Manigandan, Ramadoss;Vijayaraj, Arunachalam;Prabu, Raju;Narayanan, Vengidusamy
    • Bulletin of the Korean Chemical Society
    • /
    • v.33 no.9
    • /
    • pp.2910-2916
    • /
    • 2012
  • Cadmium sulphide (CdS) nanorods were prepared by a single precursor thermal decomposition (SPTD) method. The formation of CdS nanorods and their structure, morphology and elemental composition were studied by means of FT-IR, XRD, FE-SEM, HR-TEM and EDAX analysis. Photoluminescence (PL) and lifetime measurements were recorded to study the luminescence properties of the material. The PL spectrum of the CdS nanorods showed one broad peak and four shoulders and the cause for this emission was discussed. The PL emissions from the band edge and deep trap state of the CdS nanorods were studied by lifetime measurements. Further, the synthesized CdS nanorods showed an increase in efficiency of photocatalytic degradation of methylene blue (MB) and rhodamine B (RhB). The increase in the photocatalytic activity was attributed to the mixed phase of the CdS nanorods.

Enhanced Photocatalytic Properties of Visible Light Responsive La/TiO2-Graphene Composites for the Removal of Rhodamin B in Water

  • Areerob, Yonrapach;Oh, Won-Chun
    • Journal of the Korean Chemical Society
    • /
    • v.61 no.4
    • /
    • pp.168-178
    • /
    • 2017
  • $La/TiO_2$ - graphene composites were synthesized in this study, and applied to the photocatalytic degradation of Rhodamine B (RhB) under UV-visible light irradiation. X-ray diffraction (XRD), surface analysis, X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM), and Transmission electron microscopy (TEM) analysis demonstrated that $La/TiO_2$ nanoparticles were well distributed on the surface of graphene, and formed the heterostructure of $La/TiO_2$-graphene. Compared to the pure $TiO_2$, $La/TiO_2$-graphene composites displayed much higher photocatalytic activities in RhB degradation under UV-visible light irradiation. The photocatalytic data of $La/TiO_2$-graphene composites exhibit extended light absorption in the visible light region, and possess better charge separation capability than that of pure $TiO_2$. The high photocatalytic activity was attributed to the composite's high adsorptivity, extended light absorption, and increased charge separation efficiency, due to the excellent electrical properties of graphene, and the large surface contact between graphene and $La/TiO_2$ nanoparticles.

A Study on the Charateristics of ORMOSIL as a Dye Host by Measurement of UV/VIS Spectrophotometer (UV-VIS Spectrophotometer를 이용한 ORMOSIL의 투광특성)

  • Kim, Goo-Dae;Lee, Dong-A;Kang, Hyun-Gyu;Moon, Ji-Woong
    • Analytical Science and Technology
    • /
    • v.7 no.1
    • /
    • pp.17-23
    • /
    • 1994
  • Through sol-gel process, inorganic/organic composite as a dye host was made. It was observed that this composite has about 90% of trnasmittance by UV/VIS spectrophotometer. The transmittance is the most important requirement to decide whether the composite could apply or not as the dye host. The transmittance was increased with decreasing HCl as a catalyst, aging time, and amount of PDMS. Also, fluorescent and transmittant charateristics of Rhodamine 6G Perchlorate that was doped into ORMOSIL were measured. The fluorescent intensity was increased and the trnasmittance was decreased with rising gelling temperature.

  • PDF

Detection of Cryptosporidium oocysts from out-patients of the Severance Hospital, Korea (연세대학교 세브란스병원 환자에서의 Cryptosporidium 오오시스트 검출률)

  • Jo, Myeong-Hwan;Kim, Ae-Gyeong;Im, Gyeong-Il
    • Parasites, Hosts and Diseases
    • /
    • v.31 no.3
    • /
    • pp.193-200
    • /
    • 1993
  • A total of 230 randomly collected formalin-fixed fecal samples (submitted to the Severance Hospital, Yonsei University) were selected for tests for human cryptosporidiosis. The stool specimens were examined for Cwptosporidium oocysts by acid-fast (AF) stain, auramin-rhodamine (AR) stain, and monoclonal antibody (mAb) OW3 fluorescence method specific for oocyst wall. Of the 230 stool specimens, 21% were identified by the AF method, 22% were identified by the AR method, and 10% were Identified by the mob fluorescence method, indicating that human Crvptosporidium infections have been existing in Korea.

  • PDF

현장추적자시험에 의한 폐기물매립장 침출수 유출경로 규명

  • 강동환;정상용;이광열;김병우;김태형
    • Proceedings of the Korean Society of Soil and Groundwater Environment Conference
    • /
    • 2004.04a
    • /
    • pp.63-66
    • /
    • 2004
  • 폐기물매립장에서의 침출수 유출을 확인하고 경로를 파악하기 위해 추적자시험이 실시되었다. 추적자는 요오드와 Rhodamine WT를 이용하였으며, 추적자는 T-2, 4, 5공에서 주입하였다. 관측지점으로는 매립장내 우수관 출구와 측면배수구에서 모니터링 하였으며, 또한 주입공 하부의 9개 지하수공에서 모니터링 하였다. T-4, T-2와 T-5 지하수공에서 요오드와 Rhodamine WT 용액을 주입한 추적자시험 결촤 매립장의 바닥 차수막이 파손되어 침출수가 우수관내로 유출되고 있음이 입증되었으며, 또한 매립장내의 투수성이 매우 높아 일반적인 자연상태에 비해 매립장에서 우수관내로의 침출수 유입이 매우 빠름을 알 수 있었다. T-4와 T-2 지하수공에서 실시된 추적자시험에서 매립장의 차수벽 하부에 위치한 B-5와 B-6공에서 다량의 추적자가 관측되어 하부차수벽을 통해 침출수가 유출되고 있음이 확인되었다. 본 현장에서 실시된 추적자시험을 통해 매립장에서의 침출수 유출은 매우 빠른 속도로 발생하고 있으며, 또한 주 유출경로로는 T-4와 T-5 지하수공 주변의 바닥차수막과 매립장의 하부차수벽을 통해 유출 되어지고 있음을 확인할 수 있었다.

  • PDF

Selection of Adsorption Model and Parameters for Basic Dyes from Aqueous Solution onto Pearl Layer (수용액중의 진주층에 대한 염기성 염료의 흡착매개변수 및 흡착모델 선정)

  • Shin Choon-Hwan;Song Dong-lk
    • Journal of Environmental Science International
    • /
    • v.14 no.12
    • /
    • pp.1203-1209
    • /
    • 2005
  • Basic dyes, Rhodamine 6G(R6G), Rhodamine B(RB), and Methylene Blue(MB), dissolved in water were used to investigate single-component adsorption affinity to the pearl layer fractionated according to the size. Unfractionated pearl layers were also used as adsorbents for the R6G and RB. The Langmuir and the Redlich-Peterson(RP) models were used to fit the adsorption data, and the goodness of fit was examined by using determination coefficient($R^2$) and standard deviation(SSE). The 3-parameter RP model was found to be better in describing the dye adsorption data than the 2 parameter Langmuir model, as can be expected from the number of parameters involved in the model. The adsorption affinity to the fractionated pearl layer was higher than that to the unfractionated layer The affinity order to the fractionated Conchiolin layer was found to be R6G > MB > RB. Furthermore, the dye adsorption capacity of the various types of pearl layer was found to be in the order, the fractionated pearl > powdered pearl > unfractionated pearl, exhibiting different adsorption isotherms according to the types of layer used in the study.

Temperature Field Measurement of Non-Isothermal Jet Flow Using LIF Technique (레이저형광여기(LIF)를 이용한 비등온 제트유동의 온도장 측정)

  • Yoon, Jong-Hwan;Lee, Sang-Joon
    • Transactions of the Korean Society of Mechanical Engineers B
    • /
    • v.24 no.10
    • /
    • pp.1399-1408
    • /
    • 2000
  • A 2-dimensional temperature field measurement technique using PLIF (Planar Laser Induced Fluorescence) was developed and it was applied to an axisymmetric buoyant jet. Rhodamine B was used as a fluorescent dye. Laser light sheet illuminated a two-dimensional cross section of the jet. The intensity variations of LIF signal from Rhodamine B molecules scattered by the laser light were captured with an optical filter and a CCD camera. The spatial variations of temperature field of buoyant jet were derived using the calibration data between the LIF signal and real temperature. The measured results show that the turbulent jet is more efficient in mixing compared to the transition and laminar jet flows. As the initial flow condition varies from laminar to turbulent flow, the entrainment from ambient fluid increases and temperature decay along the jet center axis becomes larger. In addition to the mean temperature field, the spatial distributions of temperature fluctuations were measured by the PLIF technique and the result shows the shear layer development from the jet nozzle exit.

Hydrogen Peroxide Generation of DSA for Electro-Fenton Reaction and Removal of Rhodamine B (Electro-Fenton 반응을 위한 불용성 전극의 과산화수소 생성과 Rhodamine B의 제거)

  • Kim, Dong-Seog;Park, Young-Seek
    • Journal of Environmental Health Sciences
    • /
    • v.34 no.2
    • /
    • pp.175-182
    • /
    • 2008
  • This study investigates the optimal conditions for electrogenerated hydrogen peroxide production and the application of the electro-Fenton process using DSA electrodes. The influences of parameters for the hydrogen peroxide generation such as electrode materials, electrolyte concentration, current, pH, air flow rate and electrode distance were investigated using a laboratory scale batch reactor. The relative performance for hydrogen peroxide generation of each of the six electrodes is : Ru-Sn-Ti > Ru-Sn-Sb > Ru > Ir > Pt > Sn-Sb. Optimum NaCl dosage, current and air flow rate were 2.0 g/l, 12.5 A and 2 l/min, respectively. When the pH is low, hydrogen peroxide concentration was high. Electrode distance dos not effect to a hydrogen peroxide generation. A complete color removal was obtained for RhB (200 mg/l) at the 8 min mark of the electro-Fenton process under optimum operation conditions of $Fe^{2+}$ 0.105 g/l and 5.0 A. The electro-Fenton process increased initial reaction and decreased final reaction time. However the effect was not high.