• The Korean Journal of Rheology
• /
• v.11 no.2
• /
• pp.143-152
• /
• 1999

Using a Rheometrics Fluids Spectrometer(RFS II), the steady shear flow and the small-amplitude dynamic viscoelastic properties of three kinds of semi-solid food materials(mayonnaise, tomato ketchup, and wasabi) have been measured over a wide range of shear rates and angular frequencies. The shear rate dependence of steady flow behavior and the angular frequency dependence of dynamic viscoelastic behavior were reported from the experimentally measured data. In addition, some viscoplastic flow models with a yield stress term were employed to make a quantitative evaluation of the steady flow behavior, and the applicability of these models was also examined in detail. Furthermore, the correlations between steady shear flow(nonlinear behavior) and dynamic viscoelastic(linear behavior)properties were discussed using the modified power-law flow equations. Main results obtained from this study can be summarized as follows : (1) Semi-solid food materials are regarded as viscoplastic fluids having a finite magnitude of yield stress, and their flow behavior shows shear-thinning characteristics, exhibiting a decrease in steady flow viscosity with increasing shear rate. (2) The Herschel-Bulkley, Mizrahi-Berk, and Heinz-Casson models are all applicable to describe the steady flow behavior of semi-solid food materials. Among these models, the Heinz-Casson model has the best validity. (3) Semi-solid food materials show a stronger shear-thinning behavior at shear rate region higher than a critical shear rate where a more progressive structure breakdown takes place. (4) Both the storage and loss moduli are increased with increasing angular frequency, but they have a slight dependence on angular frequency. The elastic behavior is dominant to the viscous behavior over a wide range of angular frequencies. (5) All of the steady flow, dynamic, and complex viscosities are well satisfied with the power-law model behavior. The relationships between steady shear flow and dynamic viscoelastic properties can well be described by the modified forms of the power-law flow equations.

• Journal of the East Asian Society of Dietary Life
• /
• v.23 no.6
• /
• pp.789-798
• /
• 2013

In the present study, optimization on ${\beta}$-glucanase-assisted extraction was made in order to isolate waxy barley starch from domestic cultivar using the D-optimal design suitable for response surface methodology (RSM). The results demonstrated that the amount of enzyme was found to be a major influencing factor on the extraction yield, which was substantially increased by increasing the amount of enzyme. It was also influenced by the reaction time and amount of water addition; however, the two factors were less influential than the amount of enzyme. The optimized condition by RSM for the reaction time was found to be 2.63 hours and amount of enzyme 1.7%, and amount of water addition 4.38 times the weight of raw material. With the enzyme treatment, the starch content in residues (R), particularly in R1 and R5, was reduced considerably, resulting in an increase in the extraction yield and therefore primarily and effectively releasing B-type starch small granule confirmed by scanning electronic microscopy. In addition, the study determined the physicochemical properties of isolated waxy starch (i.e., purity, water adsorption capacity, thermal properties, rheology and starch morphology) and compared them with those from the enzyme-not treated sample. It was found that they were almost similar to each other, except for the purity of starch, which was lower in the enzyme-treated sample than in the enzyme-not treated one.

• Korean Journal of Food Science and Technology
• /
• v.38 no.3
• /
• pp.348-354
• /
• 2006

Baking quality of dough made of flour substituted with insoluble ${\beta}-glucan$ (10, 20, and 30%), functional food material produced from Agrobacterium spp. R259 KCTC 10197BP, was evaluated. Optimum time to reach 1st stage of dough fermentation decreased with increasing ${\beta}-glucan$ content, whereas mixing time increased. Addition of ${\beta}-glucan$ did not affect pH of dough. Hunter color L, a, and b values of dough added with up to 20% ${\beta}-glucan$ were not significantly different from those of control. Rheology properties such as cohesiveness and springiness of ${\beta}-glucan$ added dough increased, while hardness and gumminess decreased. Amylogram showed addition of ${\beta}-glucan$ to flour lowered setback and consistency, which are suggested to delay retrogradation.

• The Korean Journal of Food And Nutrition
• /
• v.21 no.2
• /
• pp.165-175
• /
• 2008

Pacific saury, Cololabis saira kwamaegi, is a traditional local food of the Eastern sea area centering around Pohang. It is well-recognized as being both tasty and nutritious. Nevertheless, bacterial contamination, excessive dryness, and compositional changes have made it edible only during the winter months. Therefore, to improve its storage, this study examined the effects of storage material, type, temperature, and duration on compositional changes in kwamaegi. The studied samples were kwamaegis that had been dried naturally for 15 days. The storage materials included an A-film, a self-developed multi-film made of polyethylene, polyamide, EVOH, and polyethylene; as well as a B-film made of polyethylene, nylon, polyethylene, nylon and polyethylene. The B films were used after pressing and laminating. The storage types included one whole fish(1G), or 2 divided fish(2G), to increase eating convenience. The 2G type was the muscle portion divided vertically after discarding the jowl, skin, and internal organs. The storage temperatures were $0^{\circ}C$, $-15^{\circ}C$, and $-30^{\circ}C$, and the storage durations were 2, 4, and 6 months. Pathogenic bacteria and rheology were measured to observe general compositional changes. The whole kwamaegi showed a total cell number of $1,565{\pm}112$ CFU/100 g flesh, while the divided Kwamaegi showed significantly greater bacterial numbers at $2,031{\pm}145$ CFU/100 g flesh. Psychrophils and halophils increased significantly while coliform were not found; the number of mesophils also increased, but not significantly. There were no significant cell number variations between the A-film and B-film. At $0^{\circ}C$, both the A-and B-films resulted in cell numbers of $115{\sim}212$ CFU/100 g flesh, revealing just $7.3{\sim}10.4%$ of the initial storage levels. Overall, there were no significant differences between the storage materials. Generally, as the storage temperature and duration increased, the moisture content of the kwamaegi decreased. Also, as storage duration and temperature increased, crude protein and crude lipid contents increased; in addition, they increased proportionally as the moisture content of the fish decreased. There were no significant differences in crude ash content with respect to the storage materials, storage temperatures, or storage durations. Finally, there were no significant differences between the kwamaegi samples naturally dried for 15 days and those stored in the B-film vacuum storage for 6 months for strength, hardness, cohesiveness, springiness, gumminess, and water activity.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.2
• /
• pp.113-121
• /
• 2019

Single walled carbon nanotube (SWCNT) has been used as a material for reinforcing various advanced materials because it has superior mechanical properties. However, pure SWCNT that does not have any functional group has a hydrophobic character, and exists as bundles due to the strong Van der Waals attraction between each SWCNT. Due to these reasons, it is very difficult to disperse SWCNTs in the water. In this work, in order to use SWCNT for production of cementitious composites, SWCNT was first dispersed in water to make an aqueous solution. Sodium deoxycholate (DOC) and Sodium dodecyl sulfate (SDS) were chosen as surfactants, and the dosage of DOC and SDS were 2wt% and 1wt%, respectively. Sonication and ultracentrifugation were applied to separate each SWCNT and impurities. Using such processed SWCNT solutions, cement paste was prepared and its shear stress vs. strain rate relationship was studied. The yield stress and plastic viscosity of cement paste were obtained using Bingham model. According to the results in this work, cement pastes made with DOC and SDS showed similar rheological behavior to that of air entrained cement paste. While cement paste made with DOC 2 wt.% SWCNT solution showed similar rheological behavior to that of plain cement paste, cement paste made with SDS 1 wt.% SWCNT solution showed different rheological behavior showing much less yield stress than plain cement paste.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.4
• /
• pp.467-474
• /
• 2020

Carbon nanotube has excellent mechanical strength and functionality, so it has been utilized in various applications. In recent years, utilization of carbon nanotube in construction material has started to get interests from researchers in the area of construction materials. However, there is limited amount of work with respect to the rheological properties of cement paste using carbon nanotube. In this work, solution made of multi-walled carbon nanotube with dispersing agent of polyvinyl pyrrolidone was used to prepare cement paste specimens, and rheological properties and 28 day compressive strengths of cement paste using multi-walled carbon nanotube were measured. According to the experimental results, as the amounnt of multi-walled carbon nanotube increased, plastic viscosity and yield stress of cement paste specimens also increased. It was also found that such effect was higher with lower w/c cement paste specimens. With respect to the compressive strength, it was maximized at carbon nanotube content of 0.1wt.% for w/c 0.30 cement paste, whereas the maximum strength of w/c 0.40 cement paste was observed with carbon nanotube content of 0.2wt%.