• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.114-115
• /
• 2006

We investigated the effects of annealing on the rearrangement of H-bonding structure and its influence on the thermal and rheological properties of $2^{nd}\;and\;4^{th}$ pseudo-generation aliphatic hyperbranched (HB) polyesters based on 2,2-bis(methylol)propionic acid. During annealing of amorphous HB polyesters, the structure becomes more ordered as a consequence of multiple H-bonds formation between linear sequences. Structure ordering is more pronounced for the lower pseudo-generation HB polyester with low molar mass, low degree of branching and incompletely reacted core hydroxyl groups which greatly increases the possibility for multiple H-bond interactions.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.327.1-327
• /
• 2002

MR(Magnetorheogical) fluid composed of fine iron powders dispersed in silicon oil is utilized to many smart structures and devices because of its significant rheological property change by the application of an external magnetic field. When we deal with the shock wave attenuation of warship structures, we should be able to characterize the high frequency behavior of MR fluids. So far, however, much efforts have been focused on the material characterization of MR fluids at low frequencies below 100㎐. (omitted)

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.1205-1210
• /
• 2000

In this research we made the mean cement particle size 4 $\mu\textrm{m}$ which can penetrate even minor cracks based on the theory of J.K. Michel who reported particles can penetrate the crack of width up to 3 times of maximum particle size. The cement slurries were produced by adding super plasticizer. The slurries were tested with slurry characterization methods and its rheological properties were characterized. The early hydrated phenomena of ultra fine cement were observed by SEM, XRD and DSC during 24 hours. Mechanical properties of hardened slurry with JIS molds were also tested in 3, 7 and 28 days. The cracked specimens which were repaired with slurries produced various conditions were tested after 3, 7 and 28 days curing in the air and adhesion properties were characterized.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.207-208
• /
• 2006

In this experimental work, the development of a multicomponent binder system based on high density polyethylene (HDPE) and paraffin wax for Powder Injection Molding of Alumina $(Al_2O_3)$ parts was carried out. The optimum composition of the injection mixture was established through mixing torque measurements and a rheological study. The maximum powder loading was 58 vol%. The miscibility of organic components and the optimum injection temperature was evaluated by thermal characterization of binder and feedstock. The thermal debinding cycle was developed on the basis of thermogravimetrical analysis of the binder. After sintering the densities achieved were closed to 98% of the theoretical one.

• Advances in concrete construction
• /
• 제8권3호
• /
• pp.199-206
• /
• 2019

High performance sandcretes (HPS) are new concretes characterized by particles having a diameter less than 5 mm, as well as very high mechanical strength and durability. This work consists in finding solutions to make sandcretes with good physico-mechanical and durability properties for this new generation of micro-concrete. However, upgrading ordinary sandcrete into high performance sandcrete (HPS) requires a thorough study of formulation parameters (equivalent water/binder ratio, type of cement and its dosage, kind and amount of super plasticizer, and gravel/sand ratio). This research study concerns the formulation, characterization and durability, in a sulphate environment, of a high performance sandcrete (HPS), made from local materials. The obtained results show that the rheological properties of fresh concrete and mechanical strength differ with the mineralogy, density and grain size distribution of sands and silica fume used.

• 유변학
• /
• 제11권2호
• /
• pp.128-134
• /
• 1999

본 논문에서는 자성입자인 막대 모양의 $\gamma$-$Fe_{2}O_{3}$ 와 $CrO_2$ 분산액에 대한 유변학적 거동을 조사하였다. 특히 입자의 농도와 전단속도의 변화에 따른 자성 입자 분산액의 점도 거동을 살펴봄으로써 분산액의 미세구조 상태 및 입자의 배향에 영향을 주는 입자의 모양이 점성 소모에 미치는 영향을 조사였는데, 평균장(mean field) 이론과 Mooney식을 통해 분산액의 점도 거동을 해석하였다. 본 연구에서 사용한 모든 자성입자 분산액의 본성 점도가 희박 분산액의 수력학 이론으로부터 얻는 값보다 큰 것을 알 수가 있었는데, 이러한 사실은 분산액내에 자성입자의 고유한 인력에 기인하여 분산 용매를 내포하고 있는 덩어리(flocs)의 존재를 뒷받침하고 있다.

• Korea-Australia Rheology Journal
• /
• 제11권3호
• /
• pp.255-263
• /
• 1999

Blends of two thermotropic liquid crystalline polymers, HX2000 and Vectra A950, were prepared by melt blending. Effects of transesterification on these blends are investigated by comparing properties of the blends with and without the addition of an inhibitor, in terms of blend miscibility and rheology. Both the uninhibited and inhibited blends are found to be largely immiscible with very limited miscibility in HX2000-rich phase. No strong evidence indicates the occurrence of transesterification in the blends in the solid state. Dynamic rheological behaviour, such as shear storage modulus (G') and shear loss modulus (G") as a function of frequency, of the blends are interpreted by a three-zone model. HX2000 shows terminal-zone and plateau-zone behaviour, whilst Vectra A950 shows plateau-zone and transition-zone behaviour. The un- inhibited blends show plateau-zone behaviour up to 50% Vectra A950 content and the inhibited blends show plateau-zone behaviour up to 60% Vectra A950 content. Compositional dependence of the complex viscosities of the uninhibited and inhibited blends displayed positive deviations from additivity, which is a characteristic feature for the immiscible thermoplastic blends. When under steady shear, both the uninhibited and inhibited blends show shear thinning behaviour and their viscosities decrease monotonically with the addition of Vectra A950. Compositional dependence of the steady shear viscosities of the two sets of blends displayed negative deviations from additivity and the uninhibited blends were more viscous than the inhibited blends for the full composition range. Although limited agreement with the Cox-Merz rule is found for the inhibited blends, these two sets of blends, in general, do not follow the rule due to their liquid crystalline order and two-phase morphology. Despite being immiscible blends, transesterification, such as polymerization, in the blends might occur during the rheological characterization, supported by the facts that uninhibited blends show HX2000-dominant behaviour at lower Vectra A950 content and are more viscous than the inhibited blends. The addition of transesterification inhibitor in such blends is advised if only physical mixing is desired.ired.

• Elastomers and Composites
• /
• 제45권2호
• /
• pp.87-93
• /
• 2010

내화재료는 건축물에서 화재사고로부터 화염을 차단하기 위해 사용된다. 본 연구에서는 실리콘 고무에 무기계 난연제인 aluminium trihydroxide(ATH, $Al(OH)_3$)와 magnesium dihydroxide(MDH, $Mg(OH)_2$)를 첨가한 복합체를 기계적 교반으로 제조한 후 내화성능향상에 관한 연구를 진행하였다. 내화재료의 열 특성분석을 위해 TGA를 사용하였고, rheometer를 이용해 유변학적 분석을 하였다. 내화특성을 분석하기 위해 gas torch를 이용하였다. 본 연구를 통하여 ATH와 MDH가 첨가되면 실리콘 고무의 내화성능이 향상됨을 알 수 있었다.

• 한국세라믹학회지
• /
• 제36권2호
• /
• pp.210-219
• /
• 1999

Alcohols, hydrocarbons, ketones 그리고 ethers와 같은 다양한 유기용매에서 질화규소 및 소결첨가제로 사용되는 AlN, Nd2O3 입자의 분산특성을 연구하였다. 분산안정화기구 및 유기공정첨가제와의 상호작용에 관한 연구를 수행하여 비수계 시스템에서 세라믹 입자의 분산성을 규명하였다. 현탁액의 물성특성은 산술된 Hamaker 상수 뿐 아니라 electrokinetic sonic amplitude 측정 및 유동학적 결과로부터 얻어진 흐름곡선을 이용하여 평가하였다. 유기용매 내에서 Si3N4, AlN 그리고 Nd2O3 분산안정화에 기여하는 정전기적 척력은 예상보다 컸으며, 이것은 유기용매의 물리화학적 특성에 의존함을 알 수 있었다.

• 한국세라믹학회지
• /
• 제33권6호
• /
• pp.665-671
• /
• 1996

Ferroelectric Pb(Fe1/2Nb1/2)O3 thin films were successfully fabricated on ITO/Glass substrate by sol-gel proces-sing and characterized to determine the dielectric and electric properties. Viscosity of PEN sol measured to investigate rheological properties was 3.25 cP which was proper for coating. The sol also showed Newtonian behavior. RTA(Rapid Thermal Annealing) was used for the annealing of the thin film and 1200~1700$\AA$ thick PEN thin films were fabricated by repeating the intermediate and the final annealing. After the deposition of Pt as top electrode by vacuum evaporation dielectric and electric properties were measured. Dielectric properties of FFN thin film were enhanced by increasing the perovskite phase fraction with increasing the annealing temperature. Measured dielectric constant of 1700$\AA$ PFN thin film annealed at $650^{\circ}C$ was 890 at 1kHz Capacitatnce density and dielectric loss were 47 fF/${\mu}{\textrm}{m}$2 and 0.47 respectively. As a result of measuring Curie temperature PFN thin films had Curie point with a rang of 110~12$0^{\circ}C$ and showed broad dielectric peak at that point. Leakage current of the PFN thin films were increased with increasing the annealing tempera-ture.