• Nuclear Engineering and Technology
• /
• 제53권7호
• /
• pp.2207-2220
• /
• 2021

Lead alloy is used as coolant in Lead-based cooled Fast Reactor (LFR). The natural characteristics of lead alloy are combined with the simple structural design of LFR. This constitutes the inherent safety characteristics of LFR. The main work of this paper is to take the main coolant pump (MCP) in the lead-cooled fast reactor (LFR) as the research object, and to study the flow pattern distribution of the internal flow field under the reverse rotation pump condition, the reverse rotation positive-flow braking condition and the reverse rotation negative-flow braking condition. In this paper, the double-outlet volute type and the space guide vane are selected as the potential designs of the CLEAR-I MCP. In this paper, the CFD method is used to study the potential reverse accident of the MCP. It is found that the highest flow velocity in the impeller appears at the impeller outlet, and the Q-H curves of the two design programs basically coincide. The space guide vane type MCP has better hydraulic performance under the reverse rotation positive-flow condition, the Q-H curves of the two designs gradually separate with increasing flow rate, and the maximum flow velocity inside the space guide vane type MCP is obviously lower than that of the double-outlet volute type. For the reverse rotation test of MCP, only the condition of the forward rotating pump of the main coolant pump is tested and verified. For the simulation of the MCP in LBE medium, it proved that the turbulence model and basic settings selected in the simulation are reliable.

• Wind and Structures
• /
• 제25권6호
• /
• pp.507-535
• /
• 2017

In the strong wind shutdown state, the blade position significantly affects the streaming behavior and stability performance of wind turbine towers. By selecting the 3M horizontal axis wind turbine independently developed by Nanjing University of Aeronautics and Astronautics as the research object, the CFD method was adopted to simulate the flow field of the tower-blade system at eight shutdown positions within a single rotation period of blades. The effectiveness of the simulation method was validated by comparing the simulation results with standard curves. In addition, the dynamic property, aerostatic response, buckling stability and ultimate bearing capacity of the wind turbine system at different shutdown positions were calculated by using the finite element method. On this basis, the influence regularity of blade shutdown position on the wind-induced response and stability performance of wind turbine systems was derived, with the most unfavorable working conditions of wind-induced buckling failure of this type of wind turbines concluded. The research results implied that within a rotation period of the wind turbine blade, when the blade completely overlaps the tower (Working condition 1), the aerodynamic performance of the system is the poorest while the aerostatic response is relatively small. Since the influence of the structure's geometrical nonlinearity on the system wind-induced response is small, the maximum displacement only has a discrepancy of 0.04. With the blade rotating clockwise, its wind-induced stability performance presents a variation tendency of first-increase-then-decrease. Under Working condition 3, the critical instability wind speed reaches its maximum value, while the critical instability wind speed under Working condition 6 is the smallest. At the same time, the coupling effect between tower and blade leads to a reverse effect which can significantly improve the ultimate bearing capacity of the system. With the reduction of the area of tower shielded by blades, this reverse effect becomes more obvious.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 제5회 압연심포지엄 신 시장 개척을 위한 압연기술
• /
• pp.261-267
• /
• 2004

Current steel makers are trying to develop new manufacturing process to secure price competition and to improve productivity by testing a various kinds of rolling condition of several kinds of steel at TCM. Accordingly, Reverse Mill operation for Stainless steel is changing to TCM operation and furthermore, even general carbon steel and electric steel plate are requested to be worked at TCM simultaneously. By these changing of rolling condition, it become to be necessary to develop new water-soluble cold rolling oil that has a characteristics to be suitable for various working condition and in this report, we would like to mention lubrication condition to fulfill requested characteristics of each steels and development and applying result of multi-purpose water-soluble cold rolling oil which has such an lubrication property.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.943-948
• /
• 1996

In this paper. we will discuss in making large size cylindrical shells with multithickness wall sections such as straight, stepped, tapered sides. These shells are constructed of type 6061 O temper aluminum starting with a blanking size of 877 mm plate. Its diameter to length ratio of 1 to 2.78 and a 36.7％ wall reduction is achieved by our continuous deep drawing process. This process required no in-process annealing. But after cold working, these shells is performed heat treatment to T6 condition. These shells are used for the making of seamless LPG pressure vessels after the spinning process. This process is composed of deep drawing, reverse redrawing, drawing-ironing and several ironing processes. In the verification of forming process design, we used DEFORM code.

• 대한치과기공학회지
• /
• 제33권4호
• /
• pp.467-478
• /
• 2011

Purpose: The purpose of this study was to analyze dental technician's job environment and health condition level and to examine its correlation. Methods: 250 dental technicians in Seoul, Incheon, and Jeonbuk area were selected. Survey was carried out from October 11, 2010 to November 25, 2010 by using self-administered questionnaire. As for the tools for this study, the structured questionnaire was used with its proven reliability and feasibility, and the questionnaire consisted of total 49 questions which included general attribute of subjects(14 questions), job Environment(13 questions) and health condition(22 questions). The data analysis was processed by computerized system with SPSS Win 17.0. Statistical analysis techniques included frequency, percentage, T-test, One-way ANOVA analysis and regression analysis. Results: As a result of analyzing the research subjects' job environment level, there was significant difference in the item of gender, working hours a day(Hour), healthy condition, job satisfaction level with dental technician, plan for task continuity in dental technician(P<0.05). The average in the job environment was indicated to be high with 2.85. As a result of analyzing the research subjects' health condition level, there was significant difference in the item of gender, task field, working hours a day(Hour), healthy condition, job satisfaction level, plan for task continuity(P<0.05). The average in the self health recognition was indicated to be high with 2.83. Conclusion: Correlation between job environment and health condition, all of variables were indicated to have reverse correlation, thereby having been shown that the worse job environment leads to the more physical subjective symptoms.

• 한국자동차공학회논문집
• /
• 제5권2호
• /
• pp.69-79
• /
• 1997

This paper deals with the measurement and analysis on the scavenging performance of the oppet-valve type two-stroke engine with different shroud system. The scavenging flow characteristics is investigated by flow visualization under steady condition, in which a dye is introduced into single-cycle method using the difference of specific gravity between two working fluids is used to evaluate the scavenging efficiency and the trapping efficiency. The 90° shroud system was found to be the highest efficiency system through both flow visualization and single-cycle test, as well as the shroud system to generally be efficient for reducing a short-circuiting flow during scavenging process in a two-stoke engine.

• 화약ㆍ발파
• /
• 제26권2호
• /
• pp.38-44
• /
• 2008

최근에 국내의 도로건설계획은 기존도로의 선형을 개량하거나 변경하는 데에 중점을 두므로, 건설하고자 하는 도로는 보다 현재 직선화되고 있는 추세이다. 국내의 지형은 대부분 산악지로 구성되어 있어 도로선형의 직선화에 따라 많은 교량과 터널의 계획이 불가피하며, 일부 산악터널의 갱구부는 터널굴착시 작업공간이 협소한 가파른 지형을 갖는 산안 계곡에 위치하는 경우가 있다. 이와 같이 가파른 지형에 터널 갱구부 굴착시 대안으로 역방향 굴착을 들 수 있는데, 3가지의 중요한 고려사항이 있다. 첫째, 적정한 폭, 높이, 그리고 길이로 Pilot 터널을 계획하는 것이며, 둘째, 터널 갱구부의 편토압에 대한 영향을 평가하는 것이고, 셋째, 갱구부의 얕은 심도의 지반조건에 대한 터널 안전성을 확보하는 것이라고 할 수 있다. 따라서 본 연구는 3차원 수치해석에 의해 얻어진 결과를 토대로 역방향 굴착의 적정성 및 Pilot 터널의 적용 범위를 제안코자 한다. 해석결과 Pilot 터널은 터널 안쪽 $20{\sim}25m$ 지점 전부터 갱구부 쪽으로 굴착하는 것이 적정함을 보이고 있다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 동계학술발표대회 논문집
• /
• pp.357-362
• /
• 2008

This study have goal with reverse engineering for petrochemistry of high pressure ball valve for localization. Ball valve for development accomplished with flow analysis based on provision of ANSI B16.34, ANSI B16.10, ANSI B16.25 In order to localize the petrochemistry high pressure control valve. Numerical simulation using CFD(Computational Fluid Dynamic) in order to predict a mass flow rate and a flow coefficient form flow dynamic point of view. The working fluid assumed the water($H_2O$). The valve inlet and outlet setup a pressure boundary condition. The outlet pressure was fixed by atmospheric pressure and calculated inlet velocity 5m/s. CFD solver used STAR-CCM+ which is commercial code. The result shows change of mass flow rate according to opening and closing angle of valve. Flow decrease observed open valve that equal percentage flow paten which is general inclination of ball valve. The structural analysis used ANSYS which is a commercial code. Stress analysis result of internal pressure in valve showed lower than yield strength. This is expect to need more detail design and verification for stem and seat structure.