• Smart Structures and Systems
• /
• 제33권3호
• /
• pp.243-251
• /
• 2024

Modeling of vibrations of a rotating pendulum with working shape memory alloy rod has been performed in the frames of a microstructural model taking into account the latent heat release, absorption and the heat exchange during direct and reverse martensitic transformation. It has been shown that the influence of the latent heat, the rate of preliminary deviation of the pendulum from the equilibrium, the rate of heating and cooling can have a significant impact on the vibrations and damping characteristics of the system.

• Advances in concrete construction
• /
• 제17권1호
• /
• pp.37-43
• /
• 2024

In this paper, boundary layer flow is observed through stretching cylinder exponentially with non-linear velocity. This cylinder is rested in porous medium. Appropriate similarity transformation is employed for the conversion of governing PDEs into ODEs. To compute the problem and solution series numerical method is applied and evaluated by using finite difference Keller-Box method. The velocity ratio, permeability parameter, Reynold number is figure out to examine the effect of on velocity profile. Fluid velocity and skin friction coefficient goes down with increment of Reynold number and permeability parameter. While reverse behavior is reported for velocity ratio. The results are validated with earlier investigations and found very well.

• Journal of Plant Biotechnology
• /
• 제4권3호
• /
• pp.91-94
• /
• 2002

An efficient molecular breeding technique for coffee plants was developed. In order to produce transgenic coffee plants, we established a model transformation procedure via Agrobacterium method. We isolated a gene encoding a protein possessing 7-methylxanthine methyltransferase (theobromine synthase) activity, and it was designated as Coffea arabica 7-methylxanthine methyl transferase; CaMXMT. Using this clone, we produced transgenic coffee plants, in which the expression of CaMXMT is suppressed by double-stranded RNA interference (RNAi) andlor anti-sense methods. The expression pattern of CaMXMT was analyzed by reverse transcription-PCR method and we found that, in the transformed cell lines, the level of transcripts were obviously suppressed by RNAi. The endogenous level of caffeine in the transformed cells was dramatically reduced in comparison with non-transformed cells.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 C
• /
• pp.1588-1590
• /
• 2004

The composites were fabricated, respectively, using 61vol.% SiC - 39vol.% $TiB_2$ and using 61vol.% SiC 39vol.% WC powders with the liquid forming additives of 12wt% $Al_2O_3+Y_2O_3$ by pressureless annealing at 1800$^{\circ}C$ for 4 hours. Reactions between SiC and transition metal $TiB_2$, WC were not observed in this microstructure. The result of phase analysis of composites by XRD revealed SiC(6H), $TiB_2$ and YAG($Al_5Y_3O_{12}$) crystal phase on the SiC-$TiB_2$, and SiC(2H), WC and YAG($Al_5Y_3O_{12}$) crystal phase on the SiC-WC composites. ${\beta}{\rightarrow}{\alpha}$-SiC phase transformation was ocurred on the SiC-$TiB_2$, but ${\alpha}{\rightarrow}{\beta}$-SiC reverse transformation was not occurred on the SiC-WC composites. The relative density, the flexural strength showed respectively value of 96.2%, 310.19Mpa in SiC-WC composites. The electrical resistivity of the SiC-$TiB_2$ and the SiC-WC composites is all positive temperature cofficient resistance(PTCR) in the temperature ranges from 25$^{\circ}C$ to 500$^{\circ}C$.

• 경영과학
• /
• 제31권1호
• /
• pp.1-15
• /
• 2014

As the scarcity of natural resources has become apparent, the recycling industry has emerged as a promising one for its growth potential. Yet, the recycling industry still remains undeveloped and inefficient for various reasons. In this study, we focus on firms' recycling processes to understand the current status of recycling firms' value creation activities. With respect to the adopted recycling processes, we empirically investigate the differences in firm characteristics and firm performance. We use the data from Keco (Korea Environment Cooperation) which annually conducts a survey of recycling firms in Korea. We exclusively consider the whole group of plastic recycling industry in order to control for a possible bias in firm performance, stemming from the heterogeneity in processing and recycling of materials other than plastics. We review the descriptive statistics from the sample firms and conduct a series of hierarchical regression analyses. The results show that most of the firms in this industry adopt physical transformation processes with a low-level technology. These firms with physical transformation processes are smaller in size and produce entry level items which do not secure higher margins. The results indicate that the recycling industry largely comprises low value added firms which lack economies of scale and resources for R&D. For the stable growth of the industry, recycling firms must create sustainable values through implementation of technology-driven processes and improvement in product quality. In addition, the government should help build a reliable reverse logistic network, lower the entry barriers, and provide necessary funding for the SMEs in the recycling industry.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권7호
• /
• pp.352-357
• /
• 2004

The composites were fabricated, respectively, using 61vol.% SiC - 39vol.% TiB$_2$ and using 61vo1.% SiC - 39vo1.% WC powders with the liquid forming additives of 12wt% $Al_2$O$_3$＋Y$_2$O$_3$ by pressureless annealing at 180$0^{\circ}C$ for 4 hours. Reactions between SiC and transition metal TiB$_2$, WC were not observed in this microstructure. The result of phase analysis of composites by XRD revealed SiC(6H), TiB$_2$ and YAG(Al$_{5}$Y$_3$O$_{12}$) crystal phase on the SiC-TiB$_2$, and SiC(2H), WC and YAG(Al$_{5}$Y$_3$O$_{12}$) crystal phase on the SiC-WC composites. $\beta$\$\longrightarrow$$\alpha$-SiC phase transformation was ocurred on the SiC-TiB$_2$, but $\alpha$\$\longrightarrow$$\beta$-SiC reverse transformation was not occurred on the SiC-WC composites. The relative density, the vicker's hardness, the flexural strength and the fracture toughness showed respectively value of 96.2%, 13.34GPa, 310.19Mpa and 5.53Mpaㆍml/2 in SiC-WC composites. The electrical resistivity of the SiC-TiB$_2$ and the SiC-WC composites is all positive temperature coefficient resistance(PTCR) in the temperature ranges from $25^{\circ}C$ to 50$0^{\circ}C$. 2.64${\times}$10-2/$^{\circ}C$ of PTCR of SiC-WC was higher than 1.645${\times}$10-3/$^{\circ}C$ of SiC-TiB$_2$ composites.posites.

• Membrane and Water Treatment
• /
• 제11권5호
• /
• pp.323-331
• /
• 2020

With the increasing demand on reverse osmosis (RO) membranes for water purification worldwide, the number of disposed membrane elements is expected to increase accordingly. Thus, recycling and reuse of end-of-life RO membranes should be a global environmental action. In this work, we aim to reuse the spent RO membrane for nanofiltration (NF) and ultrafiltration (UF) process by subjecting the spent membrane to solvent and oxidizing solution treatment, respectively. Our results showed that solvent-treated RO membrane could perform as good as commercial NF membrane by achieving similar separation efficiencies, but with reduced water permeability due to membrane surface fouling. By degrading the polyamide layer of RO membrane, the transformed membrane could achieve high water permeability (85.6 L/㎡.h.bar) and excellent rejection against macromolecules (at least 87.4%), suggesting its reuse potential as UF membrane. More importantly, our findings showed that in-situ transformation on the spent RO membrane using solvent and oxidizing solution could be safely conducted as the properties of the entire spiral wound element did not show significant changes upon prolonged exposure of these two solutions. Our findings are important to open up new possibilities for the discarded RO membranes for reuse in NF and UF process, prolonging the lifespan of spent membranes and promoting the sustainability of the membrane process.

• Journal of Ginseng Research
• /
• 제41권3호
• /
• pp.403-410
• /
• 2017

Background: Prenyltransferases catalyze the sequential addition of isopentenyl diphosphate units to allylic prenyl diphosphate acceptors and are classified as either trans-prenyltransferases (TPTs) or cis-prenyltransferases (CPTs). The functions of CPTs have been well characterized in bacteria, yeast, and mammals compared to plants. The characterization of CPTs also has been less studied than TPTs. In the present study, molecular cloning and functional characterization of a CPT from a medicinal plant, Panax ginseng Mayer were addressed. Methods: Gene expression patterns of PgCPT1 were analyzed by quantitative reverse transcription polymerase chain reaction. In planta transformation was generated by floral dipping using Agrobacterium tumefaciens. Yeast transformation was performed by lithium acetate and heat-shock for $rer2{\Delta}$ complementation and yeast-two-hybrid assay. Results: The ginseng genome contains at least one family of three putative CPT genes. PgCPT1 is expressed in all organs, but more predominantly in the leaves. Overexpression of PgCPT1 did not show any plant growth defect, and its protein can complement yeast mutant $rer2{\Delta}$ via possible protein-protein interaction with PgCPTL2. Conclusion: Partial complementation of the yeast dolichol biosynthesis mutant $rer2{\Delta}$ suggested that PgCPT1 is involved in dolichol biosynthesis. Direct protein interaction between PgCPT1 and a human Nogo-B receptor homolog suggests that PgCPT1 requires an accessory component for proper function.

• Plant Breeding and Biotechnology
• /
• 제5권3호
• /
• pp.237-242
• /
• 2017

AT-hook proteins of plant have shown to be involved in growth and development through the modification of chromatin architecture to co-regulate transcription of genes. Recently, many genes encoding AT-hook protein have been identified and their involvement in senescence delay is investigated. In this study, soybean transgenic plants overexpressing chromatin architecture-controlling ATPG7 gene was produced by Agrobacterium-mediated transformation and investigated for the positive effect on the important agronomic traits mainly focusing on yield-related components. A total of 27 transgenic soybean plants were produced from about 400 explants. $T_1$ seeds were harvested from all transgenic plants. In the analysis of genomic DNAs from soybean transformants, ATPG7 and Bar fragments were amplified as expected, 975 bp and 408 bp in size, respectively. And also exact gene expression was confirmed by reverse transcriptase-PCR (RT-PCR) from transgenic line #6, #7 and #8. In a field evaluation of yield components of ATPG7 transgenic plants ($T_3$), higher plant height, more of pod number and greater average total seed weight were observed with statistical significance. The results of this study indicate that the introduction of ATPG7 gene in soybean may have the positive effect on yield components.

• 한국재료학회지
• /
• 제11권12호
• /
• pp.1057-1062
• /
• 2001

We investigated the change of mechanical properties for TiNi shape memory alloy by heat treatment. 6061Al matrix composites with TiNi shape memory alloy as reinforcement were fabricated by vacuum casting. TiNi alloy has the maximum tensile strength at 673K treated and there is no change of tensile strength and hardness at 448K treated. The composites, prepared by vacuum casting, showed good interface bonding by vacuum casting. It was about 3$\mu\textrm{m}$ of thickness of the diffusion layer. Tensile strength of the composite was in higher than that of 6061Al alloy as increased value of about 70MPa at room temperature and about 110MPa at 363K. We thought that the increase of the tensile strength at 363K was due to reverse transformation of the TiNi shape memory alloy.