• 한국대기환경학회지
• /
• 제29권6호
• /
• pp.830-837
• /
• 2013

The purposes of this research are to know the dust removal efficiency according to the changes of gab between positive and negative plates in dust removal chamber. The experiments for dust removal efficiencies were conducted with changing the electrode-plate gab from 2 cm to 1 cm while the electric pressure, influent flow, and linear velocity were kept 5 kV, 80 L/min, and 6 cm/sec, respectively. From the experimental results of the electrode-plate gab of 2 cm, dust removal efficiencies were decreased to as low as about 50%. Attached dust on the surface of electrodes was released due to a reverse electric charge of dust. From the experimental results of the electrode-plate gab of 1 cm, dust removal efficiencies were increased to as high as about 80% due to the dust attachment velocity to the electrodes to be far more fast than influent linear velocity. Finally, to protect a attached dust from occurring a reverse electric charge it is needed to install the non-conductor between positive and negative electrodes and also to remove air humidity.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 에너지변화시스템부문
• /
• pp.149-151
• /
• 2009

Hybrid electric vehicle has three operating mode, depending on the operation of the engine and electric motor. According to the speed range of BLDC motor, In hybrid traction mode, both the engine and electric motor deliver to drive train. Battery charge mode, the electric motor operates as generator and is driven by the engine to charge the batteries. In engine alone traction mode, the electric motor is do-energized, and vehicle is propelled by the engine alone. we propose hysteresis current control technique to maintain constant speed in the motor load torque at the reverse direction. The proposed method is verified by using Matlab Simulink software.

• 대한전자공학회논문지
• /
• 제25권7호
• /
• pp.780-790
• /
• 1988

We have studied the hot-carrier-induced degradation caused by the high channel electric field due to the decrease of the gate length of MOSFET used in VLSI. Under DC stress, the condition in which maximum substrate current occures gave the worst degradation. Under AC dynamic stress, other conditions, the pulse shape and the falling rate, gave enormous effects on the degradation phenomena, especially at 77K. Threshold voltage, transconductance, channel conductance and gate current were measured and compared under various stress conditions. The threshold voltage was almost completely recovered by hot-injection stress as a reverse-stress. But, the transconductance was rapidly degraded under hot-hole injection and recovered by sequential hot-electron stress. The Si-SiO2 interface state density was analyzed by a charge pumping technique and the charge pumping current showed the same trend as the threshold voltage shift in degradation process.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1559-1561
• /
• 2003

In northeast Asia, there will be several important HVDC transmission lines to be established in Korea and China for perspective electric network market. 5500V 4-inches High voltage thyristor can be used in the DC transmission and distribution of electric power system. In this application, many thyristors are connected in series for each thyristor valves. Therefore, the required low reverse-recovery charge QRR and low on-state voltage drop $V_{TM}$ for such thyristor is necessary to this application. In our work, the on-state and off-state voltage performance was simulated by commercial simulation software.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 추계학술대회 논문집
• /
• pp.13-14
• /
• 2016

This paper has introduces a novel Integrated On-board Charger (IOBC) to reduce the size, weight and cost of power conversion stages in Electric Vehicles (EVs). The IOBC is composed of an OBC and a low voltage dc-dc converter (LDC). The IOBC includes a bidirectional ac-dc converter and a bidirectional full-bridge converter with an active clamp circuit. The LDC converter is a hybrid topology combining an active clamped full-bridge converter and a forward converter derived from the Weinburg converter topology. Unlike conventional OBC, the proposed IOBC is compact and the LDC converter of it can achieve a higher efficiency. In addition, the LDC converter of the proposed IOBC can achieve high step-down voltage conversion ratio, no circulating current, no reverse recovery current of the rectifier diodes and small ripple current of output inductor on the auxiliary battery. A 1kW hardware of the LDC converter is implemented to verify the performances of the proposed IOBC.

• Bulletin of the Korean Chemical Society
• /
• 제33권8호
• /
• pp.2689-2693
• /
• 2012

Single-walled carbon nanotubes (SWNTs) and $C_{60}$-encapsulated SWNTs ($C_{60}@SWNTs$) are introduced to Ru-sensitized photoelectrochemical cells (PECs), and photocurrents are compared between two cells, i.e., an $RuL_2(NCS)_2$/DAPV/SWNTs/ITO cell and an $RuL_2(NCS)_2$/DAPV/$C_{60}@SWNTs$/ITO cell. [L = 2,2'-bipyridine-4,4'-dicarboxylic acid, DAPV = di-(3-aminopropyl)-viologen, and ITO = indium-tin oxide] The photocurrents are increased by 70.6% in the presence of $C_{60}@SWNTs$. To explain the photocurrent increase, the reverse-field emission method is used, i.e., $RuL_2(NCS)_2$/DAPV/SWNTs/ITO cell (or $RuL_2(NCS)_2$/DAPV/$C_{60}@SWNTs$/ITO cell) as an anode and a counter electrode Pt as a cathode in the external electric field. The improved field emission properties, i.e., ${\beta}$ (field enhancement factor) and emission currents in the reverse-field emission with $C_{60}@SWNTs$ indicate the enhancement of the PEC electric field, which implies the improvement of the electron transfer rate along with the reduced charge recombination in the cell.

• 전자공학회논문지D
• /
• 제34D권11호
• /
• pp.30-36
• /
• 1997

AlGaAs/GaAs HBTs are developed well enough to be commercialized as an active device in optical transmission system, but there remains the unanswered questions about reliability. In this paper we applied the reverse constant current stress at the high voltage in avalanche region for a long time to find out a new degradation mechanism of junctrion I-V. The unction off-set voltage at which the current vanishes to zero was shifted to the negative direction of applied bias due to the increment of leakage current as the stress time increases. It was identified that the degradation was induced by the hot carriers which were generated at space charge region and trapped at the interface between GaAs base and the passivation nitride enhancing the electric field across the nesa edge.

• Korean Chemical Engineering Research
• /
• 제56권5호
• /
• pp.679-686
• /
• 2018

폴리아미드 역삼투막을 이용하여 염화나트륨, 아세트산나트륨, 구연산나트륨 용액의 역삼투 농축실험을 행하고, 농도분극 현상을 압력, 용질의 종류, 농축액의 초기 농도를 변수로 연구하였다. 투과 플럭스에 대한 압력과 농도의 영향을 살펴보면, 공정 압력이 증가할수록 그리고 원액의 초기 농도가 작을수록 투과플럭스가 증가하였다. 농도분극이 일어나면 막 표면의 농도가 증가하여 투과플럭스가 감소한다. 농도분극은 농축이 진행됨에 따라 투과 플럭스의 감소로 이어지고 농도분극 층에서 용질 역확산을 통하여 점차 감소하였다. 이온의 크기, 분자량, 전하량이 증가함에 따라 막표면에서 정전기적 반발력이 커서 농도분극의 이론적 해석과 실험값의 차이가 컸다.

• 한국해양환경ㆍ에너지학회지
• /
• 제8권2호
• /
• pp.60-66
• /
• 2005

삼투압보다 높은 외부압력을 역으로 걸어주면 용매는 용질 농도가 낮은 용액쪽으로 이동하게 되는데 이 현상을 역삼투라고 한다. 역삼투 원리를 이용하여 40-70 기압의 압력구배를 구동력으로 해서 해양심층수의 담수화 적용성을 검토 조사하였다. 역삼투막의 성능에 영향을 미치는 유량과 염제거율에 관한 온도와 압력등 여러 인자들에 관하여 고찰하였다. 온도는 역삼투압 분리막의 유량에 비례하는 반면, 염제거율에 반비례하는 관계를 보이고 있다. 압력은 분리막의 유량과 염제거율에 비례하는 관계를 보였다. $Mg^{2+},\;Ca^{+2},\;Na^+,\;K^+$ 등과 같은 해수의 주성분 미네랄에 대한 역삼투 분리막의 분리특성은 해수와 같은 강전해질 용액에서 전하량이 큰 $Mg^{2+}$와 $Ca^{2+}$의 염제거율은 99% 이상으로 온도에 비례하는 관계를 보였다. 전하량이 적은 $Na^+$의 염제거율은 98%-99.5%로 2가 이온의 염제거율보다는 낮고, 전하량이 작은 $K^+$ 이온보다는 크게 나타났다. 약산이나 상온에서 기체상태나 유리상태로 존재하는 보론의 배제율은 역삼투 분리 막에서 상당히 낮게 나타나고 대부분 우리나라 먹는물의 수질 기준치를 상회한다. 그러나 보론의 배제율은 온도에 반비례하고 압력에 비례하는 관계를 이용하여 수온 $5^{\circ}C$, 압력 $70kgf/cm^2$의 운전조건에서 생산된 생산수의 보론 농도는 우리나라의 먹는물 수질 기준을 만족한다.

• 멤브레인
• /
• 제34권1호
• /
• pp.58-69
• /
• 2024

역전기투석(reverse electrodialysis, RED)은 해수와 담수의 농도 차로부터 에너지를 얻는 이온교환막을 이용한 전기막 공정이다. 해수와 담수에 포함된 다가 이온은 이온교환막의 고정 전하 그룹에 강하게 결합하여 높은 저항을 유발하며 uphill transport를 통해 개방회로 전압과 전력 밀도를 저하시킬 수 있다. 본 연구에서는 RED 응용을 위해 1가 이온 선택성 및 전기화학적 특성이 우수한 세공충진 음이온교환막(pore-filled anion-exchange membrane, PFAEM)을 제조하였다. 제조된 막의 1가 이온 선택성은 3.65였으며 동일 조건에서 1.27의 선택성을 갖는 상용막(ASE, Astom Corp.)보다 우수한 수준을 나타내었다. 또한 제조된 막은 ASE 대비 낮은 전기적 저항 등 우수한 전기화학적 특성을 나타내었다. 0.459 M NaCl/0.0510 M Na₂SO₄의 해수와 0.0153 M NaCl/0.0017 M Na₂SO₄의 담수 조건에서 RED 성능을 평가한 결과 제조된 막을 적용하여 1.80 W/m²의 최대 전력 밀도를 얻었으며 이는 ASE 막 대비 40.6% 향상된 출력 성능이었다.